169 IP address I want to just change, occasionally prints

Similar Questions

• HP Deskjet 2050 3 in 1 printer, I want to just take the text black print outs

  Hello

  I recently bought

  HP Deskjet 2050 to my house

  My use is very limited and I want to just take black print out my pages of text

  So is it possible that I can load the printer/computer to never use the color cartridge, even if there is something of color on the page

  Thank you very much

  You can try it but your printer is unlikely to work properly. You'll start to see the Virgin and strangely colored printed pages.

  Kind regards
  ERICO

• I am trying to install Flash Player, but a box comes up saying "install Adobe Flash Player wants to make changes. Type you password to enable this. "I tried both versions of my name along with my e-mail address followed by my password but it just bounce

  I am trying to install Flash Player, but a box comes up saying "install Adobe Flash Player wants to make changes. Type you password to enable this. "I tried both versions of my name along with my e-mail address followed my password but it just bounces. What should I do?

  You must provide the password to your system administrator.

• A friend has two email addresses and want to change the default.

  A friend has an e-mail address main iCloud on his iPad, but does not know the password. We were able to remedy this and would like to change the e-mail addresses of the main one at the secondary level, which will make the default secondary image and the other main. In other words share the default email address now to make the secondary image by default, but always use the Mail app. The secondary address is Heaven who use Yahoo, so I use the drop-down list that appears in the settings and shows Outlook, Yahoo, etc, and select Yahoo, which Sky use themselves.

  She is an old lady who received his iPad by one of his own earlier, but which had not been deleted and no matter what, the settings are between the Member of the family. This lady is getting used to the use of Mail so prefer to stick with it, otherwise it will be the site of the sky and relearn how to Sky/Yahoo. I suggested to contact this member of the family, but I was told not to remember the password.

  I thought the reset of the iPad to remove anything to do with iCloud, but that has not worked. We went through iTunes and put his email address of sky (high school) there, he took, but that has not changed anything either. We managed to change its ID Apple logging in details to the new email address and password, then thought that the rest would be child's play, but no.

  Am I read and try to redo too to make the sky main e-mail address and a default? should I just use the menu drop down and select Yahoo?

  She doesn't have a clue on how to do these things, because it is very well a learner, this is why I am trying to help and think all this happened not knowing the password Apple ID.

  You are confusing two different issues. To change the default email in Mail and also talk with iCloud? While she may be the same as his Apple ID email address, the Apple ID itself does not affect the Mail application.

  Make Yahoo default email address and use iCloud are two totally different issues.

  So to answer the question of the Yahoo email to make the default account, you must ensure that it has been added to the iPad.

  Go to settings > Mail, Contacts, calendars > add account (unless the account is already here)

  Then scroll down on the same page and look for default account, type the following and change to any email address you want by default

  You can also delete unwanted emails in this same settings pane accounts by typing the address of unwanted e-mail and stitching remove account, or disconnection, if it's an iCloud account.

  If you did in fact change to iCloud account, the changes may not take effect until you log out, then back to the iCloud account.

  Hope this helps

• I just changed email addresses. TB guard shipping copies of emails to the new address in the old

  I can't find a place where TB directs the emails in any account to a default account. Having just changed email addresses. I have two accounts in my TB program. For every email that I receive, for each account, I get a message saying that he was sent to the old account and is not available, because the ISP has closed this account. How to change or remove this automatic redirection? I have not deleted this account in my list of TB yet, because I'm still working through the files left there to decide whether to move or delete the individual emails. Simply remove this old account to solve the problem?

  You need to sign in to your account via a browser and check your account settings.
  There is no such thing as a "Thunderbird account. Thunderbird is an email client that allows you to retrieve messages from an account that you set up with your email provider.

• I do not understand this step "we can assume any MAC address we want by finding the key that controls the NIC we want to change.

  Hello
  anyone ever did in Winxp with success. I do not understand this step

  «We can assume that any MAC address, we want by finding the key that controls the NIC we want change, put in a value chain called "NetworkAddress" and affecting the MAC address we want to use formatted as a hexadecimal 12-digit number (example: 000000000001).»

  It is a part of the "Windows 2000/XP/Vista: The Hard Way.

  from this link
  http://www.irongeek.com/i.php?page=security/changemac

  Concerning

  original title: change MAC address

  Hello

  I suggest to refer to this thread and follow the steps in this thread and check if that helps:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/697bf48c-A226-4315-8875-2bbeddf16db2

  The steps in this link are for Windows 7 and they are valid for Windows XP.

  It will be useful.

• PES 10 can't change read-only groups layer (aka I want to just make a custom in the elements DVD menu)

  A little history: I wanted to make a custom menu, so I opened a copy of one of the menu canned. In PS Elements 10 PSD files.  It opened with all the layers and their showing sublayers.  So far so good.  I made a lot of editting and had my menu pretty much right, recorded and burned a DVD with it.  I saw a few corrections that I need to do so I opened the same. PSD file and it showed all main layers (with the folder icon) but not the attached layers.

  I double-clicked to open these layers and got:

  "You try to open a group, which is not supported in Photoshop Elements.  The layers in this group will be simplified in a single layer.  Simplify the layers? Yes No. »

  I just change these things yesterday.  Everything I've done since then is save my software online. I saw that it said in this forum that "Elements doesn't support layer group/sets' but she was referring to an earlier version, I guess.

  Question 1: Is it always true PES 10?

  Whatanagement 2: if so, how me I edit the other day?

  Thanks in advance for any help you can offer.

  Joe

  #1: Yes.

  #2: I don't know.

  You need use a 3rd plugin to change layer groups.  See this discussion:

  http://forums.Adobe.com/message/3954579#3954579

  Ken

• I want to just state change when the data set are called in GridItemRenderer

  I have a GridItemRenderer here, however when the user mouse over it the States returns to criticism, I want only state change when the data value is called

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:GridItemRenderer ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  clipAndEnableScrolling = 'true' currentState 'critical' = >

  < fx:Script >

  <! [CDATA]

  import of utils. UsefulConstants;

  override public function set data(value:Object):void

  {

  Super.Data = value;

  put the text in red to indicate the old value

  {if (Data)}

  {if (!) Data.dateAcknowledged)}

  this.currentState = "critical";

  }

  ElseIf (data.dateReceived.time - data.dateReceived.time > UsefulConstants.oneDay) {}

  this.currentState = "warning";

  }

  ElseIf (data.dateReceived.time - data.dateReceived.time < UsefulConstants.oneDay) {}

  this.currentState = 'safe '.

  }

  Else if (data.status == 'CLOSED') {}

  this.currentState = 'safe '.

  }

  else {}

  throw new Error ("unexpected conditions for data.dateReceived.time - data.dateReceived.time'");

  }

  }

  }

  []] >

  < / fx:Script >

  < s: states >

  < name s: State = "critical" / >

  < name s: State = "WARNING" / >

  < name s: State = "safe" / >

  < / s: states >

  < s:HGroup x = "-1" y = "-1" width = "100%" horizontalAlign = "center" verticalAlign = "middle" height = "100%" >

  < s:Graphic id = "icon" includeIn = "criticism, warning" x = "-1" = "5" width = "16" height = "20".

  version = "2.0" viewHeight = "600" viewWidth = "200" >

  < s:Ellipse width = "88" height = "401" = "58" x y = "37" >

  < s:fill >

  < s:SolidColor alpha = "1" color = "#FE4744".

  Color.Warning = "#Ff7f45" / >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#FE3D44" alpha = weight '1' = '1' / >

  < / s:stroke >

  < / s:Ellipse >

  < s:Ellipse width = "51" height = '97' x '79' = y = '478' >

  < s:fill >

  < s:SolidColor alpha = "1" color = "#FD8E9E".

  Color.Warning = "#f69240" / >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#942EC8" alpha = "0.62" / >

  < / s:stroke >

  < / s:Ellipse >

  < s:Ellipse width = "31" height = "147" x = "72" y = "122" >

  < s:fill >

  < s:SolidColor alpha = "1" color = "#FD8E9E".

  Color.Warning = "#f69240" / >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#942EC8" alpha = "0.62" / >

  < / s:stroke >

  < / s:Ellipse >

  < / s:Graphic >

  < s:Graphic

  includeIn = "safe" width = "20" height = "20" version = "2.0".

  viewHeight = "600" viewWidth = "600" >

  < s:Path data = "M49, 294 L245, 410 L 551, 116 C 551, 116 259 519 257, 516 L 49 of the 294Z" winding = "not null" x = "-13,5" y = "-57.3" = "1.051689863204956" scaleY scaleX = "1.122194528579712" >

  < s:fill >

  < s:LinearGradient = "49" x = "115.95" scaleX = "402.4029386075604" rotation = "18.660078428615776" >

  < s:GradientEntry color = ' #359F66 ' ratio = "0.006535947712418301" / >

  < s:GradientEntry color = ' #7EFA4A ' ratio = "0.9803921568627451" / >

  < / s:LinearGradient >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#C6A470" alpha = weight '1' = '1' / >

  < / s:stroke >

  < / s:Path >

  < / s:Graphic >

  < / s:HGroup >

  < / s:GridItemRenderer >

  Override getCurrentRendererState() to return the correct status based on the data.

• Cannot get on Internet with computer Vista, getting 169 ip address

  We have a problem with Vista my boyfriend. He said that everything was working fine yesterday, and then we left for lunch. He thought that he turned off the computer, but when we came back he was and would not connect to the internet. We first thought it was a bad cable so went out and got a new but no change. I also tried to use the cable from another computer but still can't connect. We get a 169 ip address and the network shows as Public unidentified network with limited connectivity. We have tried to change for private network but always presented as identified and unable to connect to the internet network. I'm sure that yesterday we have a 192 ip address and the address of a default gateway and succeeded to another computer on the network but still could not get on the internet, but failed to get the IP 192 today. I'm confused, what is happening. Help, please!

  More information - Vista computer also has a wireless adapter that when activated, it works but we have the connection Ethernet also works. I tried to connect with the mode safe mode with networking, but get the same thing. I thought to reset tcp/ip, but given that the wireless adapter is able to connect, does that mean tcp/ip works on the computer and running that a fix would be a waste of time? I don't want to do anything that could screw up the wireless adapter. Ethernet is on board so that it cannot be let go and need to reinstall. Any ideas will be greatly appreciated!

  Thanks for your reply. I tried to remove the network adapter from Device Manager and allowing windows to reinstall but it does not solve the problem. It is a desktop computer. I started to think about how the cable could have been pulled and could have damaged the Ethernet port and was going to ask you what the lights where the cable plugs into the Ethernet port average. It's a green light solid with a yellow flashing light next to him. I decided to shut down the computer and blow the Ethernet port with compressed air. To my surprise, it works now! Although your answer directly does not solve my problem, it helped me not to do things that do not help and he will think the Ethernet port and what could be wrong with it.

  Thank you!

• Windows Live Mail - deleting email address but want to keep his e-mails in a new email address

  I change over my old email addresses (3 of them - one for friends, business, work) for 3 new, different e-mail address because I changed internet service providers.

  I exported e-mails from old e-mail addresses to save to an external drive.

  What I want to do is to import them into my new email addresses in the new Inbox folders where I store the correspondence.  Then it would be emails to or from an older email address, different enter one of my new folders of files of addresses in the Inbox where I separate topics/types of e-mail by e-mail.

  I tested it and it seems to work.  I imported a file, who appeared in 'Storage files' as a ' imported '.  Then I selected all the emails in a specific folder (example: invoices) and moved them to a new folder called (different) email inbox "bills".  They transferred and I can access and read emails - the old and the new, and it doesn't seem to matter that the old emails have been associated with a different email address.

  I just want to be sure I'm doing the right thing, or if it would have the unintended consequence of do - as I play until the file structure, etc., or do something that will cause WLM malfunction later.

  Worse comes to worse, I e-mail stored on a drive for expansion, but it would be easier to have the old and new e-mail consolidated on my current WLM.

  I did the right thing, or is that a no-no?  Or is there a better way?

  Thank you in advance for your help!

  Nancy

  It seems to me that if you do everything absolutely right. The program does not care which account a message has been sent to or-it's just a message, so you can put it in any folder you like. The only word of caution would be to allow Windows Live Mail enough time for large numbers of newly imported or - moved message index, perhaps even in working offline at the same time to minimize interference from sync/send/receive operations.

  A good reason to use storage folders rather than files under one account to store messages to archive, is that when you delete an account, all its files and their content is permanently deleted. If it is not easy, it is possible to accidentally delete an account.

• I just changed my password and apple id

  I can't connect to my Apple ID has changed on my pc, but my iPhone has still old showing Apple ID.  How to refresh to be able to use my new password and ID apple iPhone.  Thank you

  You talk to sign in with your Apple ID in iTunes Store? If so, the content you have downloaded/purchased with the old ID is locked to this ID do you just changed the email address, or have you created a new Apple ID and password? If you have created new, you can connect with that, but the old one should always be used to update applications and things that already exist on the device, unless you remove this content and purchase/download again with the new code.

• I want to just delete bookmarks. Suggested method does not work.

  I want to just delete bookmarks. The suggested procedure says to go to the bookmarks menu and select organize bookmarks. Opens the 'library', and then you select the folder that contains the bookmarks that you want to remove. But the bookmarks that I want to delete are not in the files and they are not listed in the "library" window

  "I found a way to list them in the window of the library, but I don't know how to choose a group of them and delete them all at the same time."

  Once listed in the right pane of the library window, right hand pane, press and hold CTRL while clicking on those you want to remove, release CTRL when you select what you want to remove, then carefully with the right button on one of the highlighted items and select 'Delete', all highlighted items should disappear in the right pane. entries not marked will remain in the right pane.

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: your worm (very old) ~~red:1.4.1_02 ~ ~ current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 or above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  ~ ~ Red: check your version here ~ ~: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.
  NOTE: Java version 1.6.0.21 was released. It is mainly an update for developers of Java applications and most of the users don't need to worry about downloading version 1.6.0.21. Right now, the option of update in existing Java 1.6.0.20 facilities are not updated to version 1.6.0.21. right now, it must be manually downloaded and installed. According to the release notes for Java:
  "Bug fixes ".
  Java SE 6 Update 21 contains no additional patches for vulnerabilities to its previous version, Java SE 6 Update 20. Java SE 6 Update 20 users have the latest security patches and don't have no need to upgrade to this version is current on security patches. " Source: http://java.sun.com/javase/6/webnotes/6u21.html

  Install/update Adobe Reader for Firefox (aka Adobe PDF plugin for Firefox): your version 9.3.2. current version 9.3.3 (updated security important release 29/06/2010; See: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
  ~ ~ Red: check your version here ~ ~: http://www.mozilla.com/en-US/plugincheck/
  See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
  Instead of going on the site of Adobe and download, you may be able to update to Adobe Reader installed on your system . Start > Program Files, find and click on Adobe Reader to open, click Help, click Find updates. Allow the download / update to occur. If you use this method, no need to proceed with the instructions below, but look at the two downstairs bulleted items ""NOTE for IE:"and" see also: "." Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
  If you go to the Adobe site to download the course Adobe Reader:
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  ~ ~ Red:-see the images at the bottom left of this post to see the steps on the Adobe site ~ ~
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click on the installer for Adobe Reader you just download to install/update Adobe Reader

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses a version of ActiveX. To install/update the IE ActiveX version, the same instructions as above, except use IE to download the ActiveX Installer. See: ActiveX
  • See also: http://kb.mozillazine.org/Adobe_Reader ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• I just changed my Apple ID on the site, now how can I change on my iPhone?

  I just changed my Apple ID on the website. Now how to change on my iPhone 4?

  Hello, Christie!

  Please visit Apple support communities.

  Looks like you changed the primary email address of your Apple ID and need to update the devices that use this ID.  This article with you guide through all services that use your identifying Apple and the setting of the email address.

  What to do when you have changed your Apple ID email address or password

  See you soon

• WMP cannot play the DVD wants me to change the resolution or color display.

  I just received a refurbished laptop and try to play a DVD on it.  WMP said it can't play the DVD he wants me to change my screen resolution or color my screen displays.  I've done these two, and again, it will not play any DVD I put in there!  Any suggestions would be greatly appreciated, mama

  Thank you for your answers, it was the decoder.  It has not been installed correctly.  All fixed now, I just use Classic WMP to play the DVD.   Thanks again, mama

• Unidentified network, cannot connect to the internet + 169 ip address

  Hello!

  I also have this annoying problem. I've seen a lot of posts similar and tried all the proposed solutions, but nothing worked.

  I have a

  ZTE zxv10 w300 camera and 2 computers (a laptop and a normal pc)

  There is no internet access on the computer that is not connected to the router with the cable. It can connect to this unidentified network, but not to the internet.

  This is the case with both computers.

  In addition, the computer that is first connected to the router with cable, will have this 169 ip address.

  I could solve this problem by disabling the wireless adapter, turn off the router, and then turn on the router and activation of the adapter, but then it changed back again. On one of the computers, or both.

  Any ideas what could be the problem?

  Your wireless card is not connected to anything.  The lines in bold show that the wireless adapter has an IP address that is generated by 'Addressing IP private auto' (APIPA).  This is what happens when the adapter is configured to obtain an IP automatically from a DHCP server (for example, your router) but isn't able to get one, either because the DHCP server on the router does not work (not in your case), or because it is not a valid connection between the adapter and the router.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5005G Wireless Network adapt
  Physical address.... : 00-1D-0F-F4-36-5B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::19db:c2d7:452d:b16a % 11 (Preferred)
     Autoconfiguration IPv4 address. . : 169.254.177.106 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 184556815
  DHCPv6 DUID customer...: 00-01-00-01-1A-36-12-69-00-1D-0F-F4-36-5B
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  On wireless connections, it is almost always the result of a misconfigured encryption password, but it can also occur if the router is configured with a MAC filter (or any other security measure) in order to prevent the connection, or if a firewall on the computer is not properly configured.

  From the network and sharing Center, click on the link 'Manage wireless networks' to get this screen:

  

  You can do several different ways.

  1 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Now connect to your network without wire in the usual way and carefully enter the encryption password.

  2. change the wireless network appears in the list to have the correct encryption password.

  3 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Connect to your router with an Ethernet cable and connect to the router configuration utility.  Disable all configured for the router security measures: encryption, MAC filtering, time of day restrictions, etc.  Now connect to the network without wire in the usual way.  If it works, you can reconfigure the security measures using a router configuration utility (even if there is really no need to use anything other than the WPA2 encryption and a password).

  If you are unable to connect to the router wirelessly when you have disabled all the security on the router, check third-party security software installed on your computer to see if it blocks the wireless connection.