17 - F053US, downgrade Windows 7 driver issues

Similar Questions

• Satellite A210-14 and Windows 7 - driver issues

  Jyn

  I use the Satellite A210 + 14 years with Vista at the moment, but I want to install the Windows7 in next time.
  But in the list of supported models is not Satellite A210 Series (http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01DE.htm) is there no Driver Support for Windows7 and the series A210, or would the A210 don't run with Windows7?

  I found on the website of some drivers (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU) but I think that these drivers for all the hardware? I've read anything about SDcard touchpad driver or driver chipset drivers...?

  Thanks for your replies

  Sebastian

  Hey Buddy

  Don t worry!
  All you will get for Win 7!

  I installed Win 7 on my A210 and Win 7 recognized most of the devices.
  In addition, I installed the VAP (additional package) for Satellite A300 and installed the support flash Cards out to Satellite L500 utility. The flash card tool is important for the FN keys.

  WLan, LAN and graphics driver have been recognized by Win 7.
  But you can also use the Win 7 driver automatic installation option in the Device Manager, choose the device, and then choose Update driver
  The first option will allow you to search for a driver updates automatically option s nice!

• Driver Geforce 5470 Vostro 740 M in Windows 8.1 issues 64-bit

  Hello

  After a catastrophic clean install of Windows 10, where I had to make sure wouldn't it have the version of the Intel Management Engine 9.5 driver, or my laptop not properly closed; and get Intel Graphics display driver with the Windows display driver model version lower than 2, or the drivers for my Nvidia chip would not work, I decided to do a factory reset of my Vostro 5470 with its Windows 8.1, so that everything works correctly, as having been shipped.

  Nope...

  Much to my surprise, the drivers for my GeForce 740 M do not work. I family of Intel graphics driver 10.18.10.3345 version, and Dxdiag tells me I have 1.3 WDDM. I tried to install drivers Nvidia Dell (Video_Driver_R4HJ8_WN_9.18.13.3165_A02) or directly from Nvidia. My GeForce simply won't work. It shows the yellow exclamation mark on the Device Manager. If I try to run the Nvidia Control Panel, I'll even get an error message telling me that I don't have an Nvidia card installed.

  Any ideas?

  Thank you!

  OK, it works now. I am posting this after my own post for someone else can possibly be benefited from my experience.

  After a full day of frustration, I managed to make it work after flashing the BIOS. It should be noted that I had a factory reset full of my Vostro 5470, with drive repartitioning and all that. Even in this case, the Nvidia drivers did not, contrary to what one might expect. I should mention that for days, I used Windows 10, I had updated the BIOS, so that could be a factor. Today, I have flashed the BIOS to the same version, I already use the latest version. After that, I installed the Nvidia drivers and now it worked. I've already updated the drivers and everything seems OK.

  See you soon and good luck to you who read this.

• Can I downgrade Windows 8 64-bit for Windows 7 64-bit?

  Can I downgrade Windows 8 64-bit for Windows 7 64-bit?

  And also my drivers continue to operate?

  I have only one installation of Windows 7 disk and want to make sure that I could use it incase if my computer goes down / gets corrupted / ect. Since I formatted acccidently my OEM drive when I take away a lot of partitions, I did.

  My computer:

  Model: HP 2000 Notebook PC

  Model No.: C2N26UA #ABA

  OS: 8 64-bit Windows

  Additional info: my computer came with Windows 8 64-bit pre-installed.

  Hello:

  First of all, make your game of W8 recovery discs before proceeding.

  All the W7 x 64 drivers of this Associates model should work on yours.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5275377&prodTypeId=321957&prodSeriesId=5259212&swLang=13&TaskID=135&swEnvOID=4063#11360

  The driver is missing (and is for any laptop AMD) and it's the chipset driver that installs the SMBus Controller and the USB 3.0 controller.

  You should download and install this driver first and then restart. First download listed is what you need.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Then install the graphics driver and restart, then install the audio driver and restarted.

• Downgrade Windows 2012 R2 OEM

  Hi all

  I want to downgrade my Windows 2012 R2 Standard Edition Windows 2012 Standard Edition (OEM).

  I have read the license agreement and follow the instructions on this page

  https://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/downgrade_rights.aspx

  I call and the operator told me that they don't downgrade Windows 2012 R2 by phone.

  But that is written at the end of the page above...

  Please can you help me?

  Best regards

  Jean

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Is it possible to downgrade Windows XP Professional 64 bit to 32 bit? How?

  Windows XP Professional 64-bit

  Is it possible to downgrade Windows XP Professional 64 bit to 32 bit? How? Please advice. Thank you!

  There is no downgrade option, you must perform a clean install of Windows XP 32-bit and reinstall your applications. Don't forget to back up your data files and check that you have the product keys and installation media for even before you start.

  How to do a clean install of Windows XP

  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  Also, make sure you have the drivers you need for your mother, video card
  card, sound card, etc.
  Try Belarc Advisor: http://www.belarc.com/free_download.html
  He did a good job of providing a wealth of information, including key software codes
  and you will need drivers for devices.

  J W Stuart: http://www.pagestart.com

• Is it Possible to downgrade Windows 7-Windwos Xp?

  It is Possible to downgrade Windows on a pc presario cq5300f to Windows XP?

  I already have a return of all drivers.

  The network driver must be installed with the Nvidia Chipset.Which, one did you use?

  For modem, try this:

  FTP://ftp.HP.com/pub/softlib/software10/COL26041/PV-66889-1/sp40971.exe

• 64-bit Windows 7 driver for Atheros AR5007 in dv7-1468nr

  I have been in communication with Microsoft and HP technical support both on this issue.

  Can we please have a time frame on how long before that we will have a driver for the wireless card that is in this model the actual 64-bit?

  I don't want to sound rude here, but Acer has been much easier to get around the problem of driver for windows 7.

  Microsoft did confirm this evening that there is no 64-bit for this AR5007 driver and back to HP.

  Atheros seems to deal specifically with suppliers more with the support of its prodiucts, as it is my return to HP after six years of absence and the fact that my company is jumping through the hoops for the HP partnership, I would like an honest answer from an employee of HP.

  How long before that this driver is available in 64 bits?

  Until that time, all of the product is worthless for me as a professional and as a student for the simple reason that when you try to use a suppliant of security required for authentication, the network manager crash when using the measure of 802. 1 x. Microsoft has identified that specifically a driver related issue because there is no driver 64-bit available.

  Not to play against each other here, but in my profession and in my studies, I tend to promote these products that seem to work better and where assistance is available. The Acer also contained an Atheros card, but it was changed to use a broadcom driver in Windows 7. No idea why or how, I know that it works and it supports the Cisco PEAP supplicant, which is an important issue with the dv7-1468nr and Windows 7 with the Atheros AR5007 wireless device.

  Other related driver issues such as the multimedia remote that might be expected given that windows 7 has not officially released, but when I contacted support on the card reader does not not (another feature that works out of the box on an Acer hardware), I was told basically sorry charlie, good luck. Fortunately, I was able to locate an XP driver for the card reader works. The media remote is a trivial question, but the wireless is a serious problem. If it cannot be resolved within a reasonable time, I fear I will be boxing it up to return to where it was purchased, as defective. the deployment is in a few days...

  lets hope that we can really appropriate at this time that drivers.

  After three long sessions with Microsoft and a few sessions where I was not very tolerable with the "apology" given for drivers not made available via the website of HP, I was able to refine the exact question to something other than a real driver file.

  If the question was not in fact the driver file, it does not change the fact that HP should provide drivers on their website that they will BE supported for all operating systems promoted regardless of the version (Home Basic, premium, professional, ultimate, etc..). It became a problem in my final conversation of a HP technician before they gave me a link to a driver file real 64 bit, of course claim immunity from liability for any damage as a result of the application. The link of this driver is here.

  Now for the real root of the problem.

  On the new installation, there are several devices that have remained unknown in Device Manager.

  Day after day, a lesbianism HP drivers and applications to solve problems.

  What was actually the connection magaer crash on trying to manually create a connection by using the Cisco's PEAP Protocol was a corrupt application of Cisco installation. Through the process of trying to repair the installation and actually manually change the registry and remove all traces of the application with Microsoft in the remote session, it was determined that the system had become corrupt and need a fresh 'custom' install.

  After installation, using all the HP and Microsoft drivers only, (no application of third party still installed) I have successfully install the 64-bit application Cisco PEAP for 64-bit Vista and create the connection which is required.

  To date, there is only one problem with this laptop and I expect a fix from HP for it in the coming days.

  The HP MediaSmart application for this machine special 64-bit is always just a touch unstable running Windows 7 Professional.

  I hope that it can save someone else the days of frustration I endured everything in trying to solve this problem.

• Installing the Conexant 20585 error Windows 7 driver

  Having a problem with the audio driver on Windows 7. The conexant 4.95.48.50 driver version will not be installed correctly. I uninstalled the device in the Device Manager with the option to remove the driver and also removed from Add/Remove Programs, rebooted and reinstalled, but it does not install.

  Under device status: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Also the modem does not work properly either (I believe it is shared on the audio chip).

  I recently bought this laptop and the restoration of the factory had been performed. I started to update the drivers for your laptop, but I think that Windows Update may have tried and failed to update the driver. I learned since the update of Windows Installer driver should be disabled until you get all Lenovo drivers installed.

  At this point I plan to restore the factory settings. Any advice on how to fix this driver? The usual bugs do not work.

  Thank you

  I solved the problem be restore to factory settings. The issue seems to have been related to Windows drivers updated against the Lenovo drivers. After the restoration of the system, I am sure that updated from Windows Update driver have been disabled and updated sound and hotkey drivers directly from downloaded versions. The system has been restored, its ongoing pilot to execution current, and all works fine.

• Display card driver issue (Digital Signature of the unverified driver)

  In Device Manager, I have a question, marked by an icon of yellow exclamation next to "ATI Radeon HD 3200 Graphics" under the heading "graphics cards".  When I right click and go to properties I see the message: "Windows cannot verify the digital signature for the drivers required for this device. A recent... (Code 52) ».

  My graphics card is built into my motherboard, which is the GIGABYTE GA-MA78GM-S2H Micro ATX AMD.

  I have not install my own drivers, I let Windows 7 install drivers for me.  What do you recommend to resolve this unsigned driver issue (e.g. should I look for an ATI driver perhaps?).

  Thank you

  Hi BDub2

  Welcome to the Microsoft Answers Forum!

  We would like to know if you've made any recent software or hardware changes made to your computer.

  We receive this error if the driver has been modified. I would recommend with these methods

  Method 1:

  Uninstall and reinstall the device in Device Manager. Steps to uninstall the device:

  i. click on start, type devmgmt.msc and then on enter.

  II. Locate the display adapter device

  III. right click on the device and select uninstall

  IV. restart the computer to make the changes happen

  Uninstall and reinstall the card program and features. Steps to follow

  i. Click Start and select Control Panel

  II. in the Control Panel double-click the "Programs and features" icon

  III. here you can find all the programs and items that are installed in Windows 7.

  IV. to remove the adapter click once on the program and then click Uninstall/change, and follow the prompts.

  v. install the last driver on the manufacturer's Web site. Download the Windows 7 compatible display driver.

  Link: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Method 2:

  Run a scanner online to check any malware or virus activity. Links below will help you to scan on the computer.

  http://www.Microsoft.com/Security_Essentials/

  Download

  Link for reference: what is a signed driver?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-signed-driver

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Help, please... I need Windows XP driver for my CQ40-121TU

  Help, please... I need Windows XP driver for my CQ40-121TU

  Please send me a full links to the driver for CQ40-121TU thank you very much...

  Your computer came with XP? If your computer came with VISTA and was never made for XP, so no XP drivers will be available for the system. I looked at the HP site and could not find XP drivers, which probably means that it is a model of Vista, not XP. If it came with XP then call HP and they will be able to send you a XP disc for a small fee, like $15 or more.

• When Windows 8 driver for laptop Satellite C660D - 1 H 2 be available?

  When Windows 8 driver for laptop C660D - 1 H 2 be available?

  Probably when Microsoft offers on the market and when Toshiba start offering equipped laptops of preinstalled Win8.

• Pavilion a1400n: Windows XP driver for a LaserJet 1200 printer attached to a Windows 7 computer

  Where can I find the driver Windows XP on a 32-bit PC wants to be able to add a printer connected to a PC running Windows 7 64 bit which are on my home network?

  I worked through the process of adding a printer to my Windows XP machine that I can get to the point in the Add Printer Wizard after the navigation of the printer and choose what I click Next and the response that I actually want add the printer that is on the Windows 7 PC. I am then presented with a dialog box indicating that the INF file is necessary. I downloaded the drivers that are on http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58928 & swLangOid = 8 & swEnvOid = 4063 and tried each of them pointing to the directory where they are each. When I do that I said that "Windows cannot locate a suitable driver. Contact your administrator for help to locate and install a correct driver.

  Where can I find the suitable driver for PC Windows XP print to a printer connected to a Windows 7 PC on my network?

  I found a solution to this problem, but this isn't the ability to print a document from my XP computer to a shared printer connected to my Windows 7 computer. The solution I implemented was to connect my XP computer to the printer via a parallel cable. I went with this approach for two reasons.

  First of all, I realized that none of the drivers for this printer are available for Windows 7 64-bit allow me to print a document double sided or in a brochure (print booklet of course depends on the ability to print double-sided) from my Windows 7 computer. The dirver for this printer on my XP (32 bit) provides these capabilities. The 64-bit Windows 7 driver that Microsoft provides through Windows Update appears to support these capabilities, but when these options are selected, that the document prints single sided. Windows 7 64-bit universal printer driver for this printer that is available on the HP site is not yet expected to provide these features. It's as if HP abandoned for most of this printer. I understand that this is an old printer, but what I find amazing, it is that he was not so old a printer when Windows 7 64-bit was new, so why can't HP provide the latest version of the driver that could perform these functions? (Of course I can just be assuming that at some point it might). Surely it cannot take up that much space on their server. The other question is why the universal printer driver for Windows 7 64 bit cannot provide these capabilities? XP driver 32 bit I have, which is also a universal printer driver that I downloaded several years ago on the HP site, provides the capability. I have tried downloading a version of XP 32 - most recent bit of the driver to see if it was stripped of these capabilities.

  Second, I chose to use the parallel connection because my XP computer has a parallel port, I already had a parallel cable which was not used, and doing so allows me to have the printer connected permanently on both computers. Tempting to connect two computers using a cable USB would require to manually switch the USB of a computer connection to the other whenever I tried to print from the computer that was not connected.

• HP Photosmart Premium C309g: 10 Windows printer driver for HP Photosmart Premium C309g

  Where can I find a Windows 10 driver for HP Photosmart Premium C309g printer?  I tried the Printer Wizard and it didn't work.  Thank you

  Thanks, it worked!