17 - j153cl: HP Envy 17-j153cl BIOS password

Hello and thank you in advance for your time.

Recently, I applied a BIOS update for my Envy laptop and after reboot wins the error that no boot device were found.

When I tried to enter the BIOS using my previous password, I get an invalid password error. After the password in three attempts, a message indicates the system off and displays the code 84901888

Can you help me to determine what that unlock password should I use?

@jhsoy97

Enter 31669208

REO

I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

Tags: Notebooks

Similar Questions

  • Envy 15-k116TX: HP Envy 15-k116TX BIOS password reset

    Excused me!

    I forgot the administrator password of my ENVY 15-k116TX BIOS.

    This is the code it shows after 3 times to type the wrong password:

    68026368

    Could you give me the code to reset to do this, please?

    Thanks in advance.

    Hello

    Try the code below

    77984968

  • Envy Beats: The Bios password

    Hi, can someone help me to reset the Bios password?

    Product information:

    HP beats want

    Windows 8 64 bit operating system

    Deactivation of the system 67889438

    @Alraes

    Enter 78781418

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • HP Envy X 2 BIOS password reset

    I have a HP Envy X 2 which is asking to specify a password to enter BIOS setup. I apparently lost the password. I am able to start windows, but cannot enter the bios setup. How can I reset the password?

    Hello

    Based on the "Code to end' in your other posts, try to enter:

    72790108

    Kind regards

    DP - K

  • Envy 17-3001: the Envy 17-3001 BIOS password reset

    I have a client with an Envy 17 that it has not used for 3 years and he has forgotten the password for BIOS/voltage. After 3 failed attempts, I get a stop of 80072425 code. Can you help me? Thanks in advance.

    Hello

    In this case, check the following points.

    The stop code you posted is correct.

    Shut down the laptop, unplug the power adapter.  Perform a hard reset - see the document here.  Start Notepad and try entering the code again.

    Try entering the code via an external usb QWERTY keyboard.

    Kind regards

    DP - K

  • HP Envy m6-1126dx: Bios Password Protected settings

    When I press f10 to make the menu of bios as a blue box appears and a single beep from the motherboard. He said: "ENTER the ADMINISTRATOR PASSWORD." After 3 failed tent another blue box appears with a beep that indicates 'OFF SYSTEM [51113833}'.

    Unfortunately, I do not know the password and I looked around to try passwords and I have not found one that works. Any help is very appreciated.

    @DynamicGiPo

    Enter 44871215

    Kind regards

    DP - K

  • HP Envy 11-g010nr: Bios password

    I started a full restore on HP ENVY x 2 11-g010nr, but after a few hours it restarts and windows install error aways, tried recovery option (F11), but no longer. just stuck on the black screen...

    I'm going crazy, trying to reinstall windows,

    I tried to change bios options for windows install from usb, but it is blocked, I put the wrong code 3 times and get the code to stop 27267100

    Can anyone help? Please?

    Concerning

    Thank you

    Hello

    Come in:

    38145126

  • HP Envy 14 t: bios administrator password

    I don't remember my bios password

    After three unsuccessful attempts, he told that system disabled with a code.

    the code is 68681729

    Laptop: HP ENVY 14 t

    Help, please

    At the password prompt, try 77789309

  • HP envy m6-1105dx: hp envy m6-1105dx bios reset password forgotten

    Hello so I have a laptop hp envy m6-1105dx and the other day I changed my bios password.

    I get after 3 attempts of system disabled. I tried to install linux on a different partition, but I can't disable secure boot and enable legacy support. one of the codes disable I got was 72705813. I can tell you previous password if necessary.

    Heeeey just figured it out. discovered that laptos hp but not the most recent have an admin password that can be generated by the error code it gives you. I did just now like 20 times and it works every time. a little uncertain but that's why you have enctyption. and at least if you have a program that is triggered when turned on and you will find computer and then Yes. Just look it up in google bios password recovery generator.

    This is the link.

    http://BIOS-PW.org/

    so the next time that you change the password do not he's tired.

    ill see ya maybe the guys in the future if I can't understand it.

  • Envy of HP dv7 BIOS password reset

    Hello
    I forgot my bios password for dv17 want and appreciate your help...
    Thanks in advance
    Lock code: 52016721
    Tony

    At the password prompt, try 43974307

  • HP ENVY 17-j001er: the bios password reset

    Hello.

    I have fogot administrator BIOS password.

    I am trying to enter the password 3 times & see message: "system disabled 77210195.

    Can anyone help me to reset the bios password?

    Enter: 68178111

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

  • HP Envy 6-1010us: resetting the BIOS password

    Can someone help me, I don't know the BIOS password, and I have a 59842754 system disabled.

    I was trying to get into the BIOS, because my laptop says no it does not find a hard drive.

    Help, please

    Hello

    Come in:

    46720390

    Concerning

  • HP envy m6: Bios password

    Hello

    I forgot the Bios Passw code is: 78751366

    Thanks for all your support.

    See your previous post on the link below.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/BIOS-password/m-p/4964501#M288507

    DP - K

  • HP Envy 13 1050eg: Admin of BIOS password recovery.

    Hi all

    I would like to know how to remove my administrator BIOS password, I know that I never recorded a BIOS admin password, but whenever I try to go to the admin of the bios it asks password that I do not know now. I need to make some changes, so how can I now access the bios Setup.

    When I get 3 wrong passwords, it gives off system error and a number written below 66276313 (something like that)

    Anyone can guide me please?

    have tried ho flash bios as well.

    Thanks in advance experts.

    Kind regards

    Hhhhhhhhhhhhhhhhh

    Hello

    Try: 79640917

  • HP envy m6: BIOS Password Reset

    Forgot the password of the BIOS on this laptop, and I need a PIN to work around and remove/reset the BIOS password. I pressed on enter 3 times to get a "system disabled" # of 96257035. Help, please! Thank you.

    Try > 29135011

Maybe you are looking for

  • 40RL933 update problem

    Hello. I have the same TV as thread 40RL933 with serial No. 76 M 03298 with K at the end. In 'System info' menu i ' v got: Toshiba20126.8.4G.1 MARCH 20, 2012-56.2.00.0MBOOT Version: 00545609 TV' has not been connected to the web for or3 2 years. Yest

  • I lost my volumn taskbar icon, how can I solve this problem

    I lost my volumn taskbar icon, how can I solve this problem

  • HP G71-340US AC power not recognize, during the factory re-set the system restore

    According to the guidelines of the object: trying to do a complete system restore, and "WARNING: your laptop is running on battery power."  Recovery Manager requires that your laptop is plugged into a power outlet. » .. but charger is plugged.  Batte

  • Photosmart C4280 will not install

    Howdy, Recently, I upgraded my modem and in the process lost my Photosmart C4280. For reasons I can't remember and am curse - I uninstalled the software and have since tried to reinstall, but every time that it says that it cannot find the printer. A

  • PAT static & dynamic

    Hello guys,. I got the firewall pix 520 with s/w version 6.3 (3). I try windows server to access connected to my home network from my house through Real VNC 4. I think he's using port TCP 443 or TCP 5900 and for Java TCP 5800 I dunno... I'm under PAT