19-2113w HP: hp 19-2113w while a replacement screen

I have a hp all-in-one 19-2113w ' g4b06AA 'I have cracked the screen and need to replace it. " It's not under warranty. Can you please tell me the number of replacement screen model. I can still use most of the screen, but here to keep it going until I can get the new screen here. Thank you

Hello

Copy the part from following link number:

http://PartSurfer.HP.com/search.aspx?SearchText=G4B06AA

(You can to bookmark the link above for future reference).

You can buy in this store or use the part number to buy elsewhere like Amazon

Kind regards.

Tags: HP Desktops

Similar Questions

  • HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

    Hello

    So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

    steps to follow:

    1. I tried with 1 socket by using only a RAM, screen black

    2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

    3. I tried step 1 and 2 using the other RAM, screen black

    now here it gets interesting

    4 tried 1 socket using Original/factory RAM, screen black

    5 tried 2 socket using Original/factory RAM, screen black

    6. tried without any RAM at all, looks like a lack of RAM, screen black

    Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

    Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

    HP 19 all-in-ONE PC

    Product No.G4B06AA #ABA

    Model n ° 19-2113w

    10 64-bit Windows

    Update

    Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

  • L50-B05C satellite crashing while gaming - black screen without warning

    Laptop Toshiba Satellite L50-B05C crashing
    I write because there is no section of series B in the section.

    The laptop is 2 months old and has just recently been crashing (blacken off instantly, screen) without warning when I play a game.
    It had worked perfectly in these games until about a week ago.

    Use CPU, memory and disk are all weak, so I have no idea of what is happening.

    Any help would be greatly appreciated, thank you.

    I write because there is no section of series B in the section.

    Just FYI: it is an L series (L50- xxxx)

    The laptop is 2 months old and has just recently been crashing (blacken off instantly, screen) without warning when I play a game.

    Have you noticed a temperature higher while gaming?
    I guess that the laptop automatically stops due to the higher internal temperature.
    This is nothing unusual if the temperature is too high... the laptop would shut down to prevent the equipment from damage...

    Try this:
    Go to advanced windows power options and reduce the max CPU performance at 90-95%
    In addition to change the cooling method for: performance.

    I would also recommend to check if fans and the vents are not clogged with dust...

    I'm not sure where you live but in my country, the temperature is currently very high and I guess it's really hard to cool the internal parts and to maintain the temperature of the low laptop

  • The add on bar is missing, while in full screen

    If NOT in full screen and then the announcement on bar is visible. Note that adding on bar is checked in both cases. I tried uncheching check again, but this does not solve the pb. Thanks for your help, it's really annoying.

    Mode full screen mode toolbar all are hidden and only the toolbar and tab bar Navigation bar will appear if you move the mouse to the top.

    You can watch the Autohide extension to choose what bars to display full-screen mode.

  • Qosmio F10-121, while the splash screen gets scratched with big purple bands

    Hello!

    Suddenly, I had a problem with my Qosmio. Maybe someone could help me.
    When I turn on my computer, the Qosmio logo appears (its ok) and then the Windows logo. But that's the problem, my screen becomes striped with big purple bands. I can't do anything, it's completely unreadable... Windows cannot be loaded, the Qosmio PIF and restart.

    When I plug in an external display, it's the same thing.
    I tried to use the restore DVD, but for the moment, it doesn't change anything.
    I see 2 problems:
    -A video card problem (but Qosmio logo appears, and the restore DVD menus are normal
    -A big failure of HARD drive (when I plug the SD of the internal Qosmio on my other computer, it is very, very slow, and suddenly, HDD disappears)
    So, if you have any advice...

    Thanks a lot for your answers and do not look at the faults.
    Eric

    I bought my laptop 5 years ago and after a week, the motherboard has been replaced. But since then, it works like a dream. Never had any problems.
    As you can see that computers are devices of high technologies and every time something might be broken.
    I think that the laptop should be checked by a technician with experience for laptop

  • IPhone overheated while talking and screen got cracked

    So I was talking a few days ago on my phone and it overheats so I dropped it accidentally, and the screen cracked. Phone sometimes got warm, but never like this, so I was surprised. I bought this phone from verizon when iphone 6 is out. They will replace the screen for me? Or should I go to apple store and pay to fix it for me.

    Verizon does not replace screens. If you have insurance that Verizon sells (Asurion), you can make a claim. However, it is better to go through Apple. If it's just the screen that needs to be replaced, it will be cheaper than an insurance claim. Be prepared, though, to be more than just the screen. Phones do not overheat as long as you can not stick to them unless something is wrong.

  • HP pavilion 23-b225d while a monitor screen

    Hello

    I just bought a hp pavilion 23-b225d all in one office.

    the seller told me that the monitor is monitor full hd LED, so I bought it but when I get home.

    I checked again with the HP official website, it is said "(23-inch) LCD screen high-definition display.

    now im so confused. in fact, the screen is LED full HD or hd LCD?

    Please confirm. thanxs much

    According to the specifications of all-in-one HP Pavilion 23 - b225d desktop , the screen is a "58,42 cm (23 inches) high-definition LCD display.» It is a Full HD (1920 x 1080 resolution) screen with a wide viewing angle field.

    Almost all flat screens HD are the LCD. Almost all flat screens LCD need a source of light, called a "backlight". This 'backlight' can be same edgelit LED, LED or CCFL (fluorescent). In addition, some manufacturers use the term WLED (white LED) instead of LED. Today, most lighting is done with LEDs, and quite possibly your screen is an LCD display with LED backlighting.

    Don't let the terminology trip you :-)

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Stick videos while playing full screen on the view

    During playback of a video online when I go to full screen the video will stop all few seconds and restarts when I drag the touchpad. When I return to the small screen video plays normally.

    Hello

    1. What is the operating system installed on your computer?

    2. what web browser do you use?

    3. this happens with all sites or with any specific Web site?

    4 have had any changes made to the computer before the show?

    If you use Internet Explorer, please follow the steps in the link.

    The video problems when you use Internet Explorer

    http://support.Microsoft.com/kb/2532294

  • When I try to go on "fullscreen" while watching the screen tube u develops and becomes empty. The sound still works. I have Firefox. Can someone help plse?

    I can't watch any of the programs in U tube on change too many full-screen. yesterday everything was ok. I tried a restore of the system without result.

    Hello

    · Is the behavior even with Internet explore?

    If Yes, then you can follow the procedure:

    a. Click Start, click Run, type desk.cpl and then click OK.

    b. click on the settings tab and then click Advanced.

    c. on the performance tab or on the Troubleshooting tab, move the hardware acceleration all the way to the right (Full position).

    d. click OK and then click Close.

    e. If you are prompted to restart your computer, click Yes.

    If the problem is only with Firefox, you can post your request in the support forum of Mozilla for assistance: http://support.mozilla.com/en-US/questions

  • While error blue screen that clicked on the network and sharing Center icon

    whenever I click on network and sharing Center icon I got blue screen error and restarted p.

    Here are the event logs and sys inf.

    http://1drv.Ms/1tq4Y9M

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.256.48
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 00000005
    BCP2: 8530801C
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    SG

    There is evidence that this is caused by malicious software.  I would like to launch malwarbytes to eliminate this possibility

    Please download the free version of Malwarebytes.
    Update immediately.
    Do a full scan of the system
    Let us know the results at the end.

    http://www.Malwarebytes.org/products

    If this comes back clean then it is related to the material, and because the DMP files mention Genuine Intel I ran the cpu stress test first.

    Try this free stress test: http://www.mersenne.org/freesoft/

    Prime95 Setup program;
    -Extract the contents of the zip file into a directory of your choice
    -Double-click on the executable file
    -Select "all stress testing.
    -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
    "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
    The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
    Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
    The selection of Test and the file stress.txt box describes the components that insists on the program.

    Stop 0 x 124 is a hardware error

    If you are overclocking try to reset your settings to standard processor and see if that helps.

    If you keep getting the BSOD here are things more than you may want.
    This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

    Stop 0 x 124 - what it means and what to try

    Synopsis:
    A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
    Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

    Generic troubleshooting ' Stop 0 x 124 ":

    1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
    (2) ensure that the machine is sufficiently cooled.
    If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
    3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
    It is best to run the latest drivers anyway.
    (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
    Their website should provide detailed instructions on the brand and model-specific procedure.
    (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).


    At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
    6) trying (stress) test these hardware components that can be put to the test artificially.
    The most obvious examples are the RAM and HDD (s).
    For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
    For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
    Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
    7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
    Who stops working mitigate the problem of the 0 x 124, jump to the next step.
    If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
    Smash back, obviously the latest addition of software may be somehow connected to the root cause.
    If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
    Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
    (8) clean and carefully remove the dust inside the machine.
    Reinstall all memory modules and connectors.
    Use a can of compressed air to clean the RAM DIMM supports as much as possible.
    (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
    Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

    If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.


    More advanced reading can be found here from a MS MVP IT PRO

  • Command bar of fusion (top of screen) meets while mode full-screen Win XP vm

    I have looked around the blogs for a similar problem but haven't found any, maybe because I'm not using the right terminology, so please tell me the existing relevant documents or post it here. Thanks in advance for any help.

    I upgraded my Windows VM to Windows XP SP3, about two months ago, then updated my installation of Fusion to 2.0.1 a month ago. I use my Win XP VM to a programme on Access 2003 VBA and generally run in mode full screen to simplify the use of the PF keys, with the command bar top of page in auto-hide mode. The only other programs I run on my VM is Security Suite that comes free with Fusion 2.0 and Microsoft OneNote 2003, I use actively in taking notes that I work. Sometimes, I use IE to check the Microsoft security updates. Given that I've enabled auto-update from Microsoft, I rarely feel the need to manually check Microsoft Update. Almost always, I would have i-Tunes streaming background music on Mac OS X, and sometimes I would switch in Unity mode so I can start a browser in Mac OS to search for information on the web. Because I'm in development of access code mode, I sometimes cause program crashes of the window, not forcing me to restart my computer virtual when that particular problem surfaces. My preference of Fusion is configured to optimize the performance of the host, based on some tip I've read in this blog some time ago.

    Some time after XP SP3 installed and update of Fusion 2.0.1 top I believe VM fullscreen command bar randomly becomes unresponsive, leaving me with no way to access my OS X applications. However, my VM would still be sensitive if not, and I can always close. Usually, I stopped my WIndows VM, then merge and raise the Fusion and my WIndows VM. Since the command bar is usually in hide mode automatic when he becomes insensitive, he appears before the eyes and blocking application windows that I work with, so I know generally as soon as it happens.

    I think that I always had this kind of problem, but it doesn't happen often and I chalk up to the cost of working with a virtual machine, but now its happening too often I want to check if I did something wrong in the software upgrade. So, here are a few questions:

    1. my understanding is that VM Tools give me the ability to run in Unity Mode. The only documentation I've read on VM Tools for Fusion says that it need Windows XP SP2. I guess this note means that VM Tools for Fusion does not support Windows XP SP1. No problem, but are there any problem using the tools in the virtual machine with Windows XP SP3?

    2 when I upgraded to Fusion 2.0.1 recently, in the hope that it can clear up this particular problem, I downloaded the upgrade of the VMware download page. My question is: I have to reinstall explicitly VM Tools when I merge 2.0 to Fusion 2.0.1?

    Merger of command bar (top of screen)

    The UI element that is at the top of the OS X Desktop is called a menu bar and you be a programmer, I'm surprised that you don't know something as fundamental as that.

  • Secret tapping (while only typed text will not appear in the EditField)

    I'm a rookie developer, then I would be happy if you can also provide an example of code for my problem.

    So I make an app that has say EditField EditField and while typing, when the user holds the LEFT SHIFT, the characters are typed are stored in the Secret of string ( without the characters appearing on the screen ) while the on-screen text is replaced with the characters (as the user types to store the secret in Secret text) which is predefined by the programmer.

    Thank you very much for the help.

    Welcome on the support forums.

    If passwordeditfield does not match your needs, you can overwrite keyChar and implement a personalized management.

  • Problem dual screen ' after working for a while, the screen of my laptop turns off.

    Original title: Problem dual screen

    I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

    Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

    KR

    bs3dm

    Portable computers support two monitors. The problem may be caused by two reasons:

    1. incorrect power setting.
    2. the problem with the drivers.
    1. you can download and open Microsoft Fix it for the question.
    2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.
  • frozen MacPro startup

    While working online screen of my MacBook Pro suddenly went grey. I turned off by holding the power button, and then he started upward. He would charge the Apple starts the bar and after it went down to about 1/3 of the way suddenly turned. I tried a few times and then opened it in safe mode. Ran repair disk and after having received the message in green "everything seems to" correct the screen froze. He said there were five minutes to go and I waited at least 20 minutes. I then typed my mouse and the Rainbow ball began the round and I've waited longer until I turned it off again. I tried to go back to the top and got a flashing question mark inside a folder. It off and starts in safe mode this time the Bar starts but remains stuck at halfway through and will not move. Any suggestions what I can do? Thanks for your time!

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    https://support.Apple.com/en-us/HT204904

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • I have a cycle recorded a vocal performance. I don't know how to get the anchor point to the film when the singer arrives early or sings after the cycle. Can anyone help?

    Loptic pro x. i. I cycle recorded a singer I just can't find a way to easily get small pieces of audio when the singer arrives early or sing a note sustained beyond the cycle. CAN ANYONE SHED SOME LIGHT ON THIS PLEASE?

    Just drag the right or left side of the region be expanded to include most of the voice.

    While cycling (replace) each record cycle is in fact only the region of an audio file that contains all the audio recording of the entire global cycle.    Then you cycle 2-3 bar record and do you 5 times counting from 1 to 20 in the microphone... Each region will be only 1 respective bar where the recording of the cycle started while you were, however each region refers to an audio file that contains all the numbers from 1 to 20.

    Then expanding to the right or left side of the region - will provide you with the early start or finish late audio.

    Same thing for taking records, except that you must be in edit mode to manipulate it start/end region.

Maybe you are looking for