19 satellite C50-A-t - Touchpad does not

Similar Questions

• Satellite A350-20 q - Touchpad does not

  Hello members,

  I have a Satellite A350-20 q that is running a Windows Vista Home Premium 32-bit operating system. The problem is with the touchpad which stops working when the laptop is connected to the
  AC power supply and everything that happens, I can feel the static on the buttons near the tablet which are metallic.

  The touchpad works fine when it runs on battery and it causes a lot of trouble because I move around a bit and can't take my mouse around.

  I called Toshiba support, but all said, it was to replace the charger that does not make any sense to me but I try, and again, it doesn't help much.

  The touchpad works very well when Vista is installed and is not updated, but once the system is fully updated it starts to cause problems and I can't yet determine which update is the cause of the problem that there are many Windows vista updates are installed.

  Help, please!
  I installed all the drivers and have the latest synaptic driver installed on the system right now.

  Thank you.

  Abhishek

  > I had called support of Toshiba, but all said, it was to replace the charger that does not make any sense to me but I try, and again, it doesn't help much.

  I think that this logic because the touchpad does not work ONLY when the AC adapter is connected.
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141976𢪘
  He has helped about the similar issue and replacement AC adapter!

  > The touchpad works very well when Vista is installed and is not updated, but once the system is fully updated it starts to cause problems and I can't determine same update is the cause of the problem that it is has many windows updates vista that are installed.

  How a windows update to do the buttons on the touchpad statically? It is meaningless for me so be it hardware or software s problem

  If this software (update of the OS) then deliver the power adapter should not all affect on the buttons on the touch pad but if there s a hardware problem, then the OS updates should not affect the functionality of the touchpad as well

  I think that it s a strange question and you should get in touch with a local ASP (partner) in your country in order to check the touchpad.

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite C855 - 1 HM-Touchpad does not work

  Hello

  My touchpad does not work! indications are he should be, pilot the newest, toggle F5 etc. Any ideas as to what may be wrong welcome. Machine is also only a few weeks, how do you contact technical support?

  Thank you

  Hello

  You can contact the Toshiba authorized service partner in your country, your hardware is defective.
  But you should first check if its hardware problem.

  First of all, you should check if the touchpad (pointing device) is enabled in the BIOS
  Press F2 during the powering of the device and go to the Advanced tab-> the system setup
  You will find the touchpad power option.

  If the touchpad is enabled in the BIOS, I recommend to check the touchpad system settings: Control Panel-> mouse-> last (Advanced) tab-> Advanced button

  Last but not least you should recover the laptop to test the device with factory settings.
  If all these tips would not be successful success, well, then I recommend to ask the guy to service

• Satellite Pro C50-A-153 - Touchpad does not work properly

  First, sorry for my bad English.

  I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

  Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

  It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

  Can someone help me with this?

  Thank you.

  On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

  How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  Check it out.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite C870-155 - the Touchpad does not work

  I have a Satellite C870 - 155 (PSC8AE) and problems with the touchpad.

  The buttons work, but not the pointer/trackpad.

  The laptop was in need of a replacement hard drive, and I don't have any recovery media. I'm running a new installation of Windows 7 (Home Premium, 64-bit) vanilla.

  I installed all the drivers, that I can find (including the touchpad).

  I tried pressing F5 / Fn + F5, but this does not change anyuthing that I can see.

  I am running the latest version of the BIOS I can find (6.60).

  Any suggestions?

  > Everything seems to work except the pointer.
  I guess that s hardware problem and the touchpad module must be replaced.
  I m straight probably because if the touchpad would be disabled or drivers that would be misunderstood, the touch area AND the touchpad buttons would not work.

  In your case touch ONLY area/pad does not work, but the buttons

  But just to be sure: go into the BIOS (F2)-> Advanced tab-> the system setup
  Here you can check whether the pointing device (touchpad) is enabled.

• Satellite L50-B-211 - Touchpad does not work

  Hi I have a question

  We just bought a Satellite L50-B-211, but the touchpad is not working properly.
  Move the pointer autour is no problem, but the buttons do not work.

  Using the buttons does nothing, left or right clicking has no effect?
  If I want to get the properties of a file right-clicking does not work?
  (two fingers press work)

  The hardware is correctly installed, there is no problem in the configuration of the device.

  Do I have to return the device (before installing our software / config the device to our needs)
  or is this a software bug?

  According to specification for laptop, your laptop was supplied with Win8.1 pre-installed so that all the necessary drivers are installed and all hardware should work fine.

  Try please check all the touchpad settings and check if changing the settings has positive effect.
  What you can try to do is to reinstall the original recovery image and test once more with the factory settings. If the result will be the same, I recommend you to contact your dealer as soon as possible and explain the situation. Ask if you can get the new machine.

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Satellite M105-S3031: the TouchPad does not work

  Hello guys!

  I have a M105-S3031 Satellite. It's been 1 week shut down and this morning when I turned it on, the touchpad did not work, check status, that's like "enable." I installed a mouse cable and with it works well.

  Any help?
  TKS.

  Check it please again using FN + F9 key combination.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Satellite C50-B-133 - HDMI does not connect to TV

  Help.

  I just bought a laptop Satellite C50-B-133.
  The problem is that I can't view HD cable on my Panasonic TV.
  He acknowledges that it is connected to a Panasonic TV.

  I did the Windows + P to select "Duplicate the screen" etc. but nothing helps.

  The interactive Wizard of the Toshiba site mentioned it could be the cable... is this possible?
  Other articles - playstation etc connect this cable without difficulty.

  When I go into settings > change pc settings > display > detect > "has not detected a different view" is the answer. However, when I go into Toshiba desktop help > tools and utilities > display utility > multiple views > panasonic tv is listed. #confused...

  Post edited by: rednep_dp

  > I did the Windows + P to select "Duplicate the screen" etc. but nothing helps.

  Please open page 51 in the document of the user s manual and you will find explanation how to switch between internal or external display.

  When you connect the HDMI cable do not forget that good on television port is enabled. After that, you should be able to pass a screen LCD of your laptop and TV using F-keys.
  If you still need assistance or advice do not hesitate to ask.

• Satellite C50-B-188 - webcam does not work

  Hello
  My uncle bought this model today. I can't the Webcam to run.

  1: the Cam does not appear in the hardware Manager
  2: the Windows camera App does not work, I get the information that no camera is connected
  3: I can not find a driver work online (as far as I know the material is called Toshiba Web Camera HD)
  4: the original shipped OS is installed (Windows 8.1, no change)

  He did not work from the start, after the first Boot Up I got tired of Skype. Camera and the built-in mic do not work.
  I tried a few other Applications and software, same result

  Thanks for your support, hope someone can help me.

  Greetings from the Germany

  Go into your BIOS and see if your webcam is enabled. If it is you may need to update the BIOS using the Toshiba update tool.

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Satellite A350 - 22F EasyMedia touchpad does not work

  Right next to the switch, there are 6 touch buttons.
  Normally, they light when I press on them, if the computer lights are out and if all the lights are on the button I pressed on flashes.

  Now the other lights (like the one that says TOSHIBA) still work, but I can no longer use these buttons.
  I have already installed value-added package and it changed nothing.

  Can someone tell me what to do and how to make them work again?

  Thank you.

  Hello

  As you have already mentioned, the VAP (value added package) controls these buttons.
  So I think the new installation of VAP should help get these buttons work again.
  Don't know why this didn't help in your case, but I think that you should try to reinstall this package once more.

  Before installing the PPV, you must uninstall the old version.
  Do this and clean the registry using other tools like CCleaner.
  After that, restart the laptop and install the latest version of VAP.
  I assume you are using Windows 7. So check and download the VAP updates the most recent series of Satellite.

  Good luck