2 1580 edge display randomly off

Similar Questions

• Display shuts off and comes back only when the Satellite A210 is restarted

  Hello

  Satellite A210 display goes off in time and returns only when the computer is restarted.
  Duration usual DURATION 30 or 45 minutes

  Please advice
  # Is it a hardware or software problem?
  # Some other face same problem brings advice?

  The machine is a year and a half old runs windows vista Basic that comes with it.

  I reinstalled the drivers card display also the problem remains same

  Hello

  Have you tried an external monitor on the laptop?
  If the external monitor works fine, it seems to be a problem of internal display and must be replaced.

  You use the factory settings on your laptop computer or you have installed your own version of Windows? Before turning to an authorized service provider, you need to restore factory settings to determine if it s a hardware or software problem. With the factory settings, everything should work fine and if not, I think it s a hardware problem.

  Check this box!

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• Help: Fuze distorts the sound when the display turns off

  Hello

  Since a few days, I own my rocket. Today, I recognized the following problem:

  When the display turns off the "rocket" distorts the song. It's a bit like stuttering, it's his bad.

  When I keep the screen turned on (by clicking on the boxes or more) he playes the song of good quality.

  The EQ is set to standard.

  Has anyone experienced the same problem?

  I don't know what to do, what an individual problem of my camera (default?) or maybe a general problem? I would stay there or should I change it?

  Thanks in advance,

  Stefan

  This problem is fixed in the next firmware should be out in the next few days.

  TO work around it, just put the equalizer settings on the equalizer custom for anything other than 0,0,0,0,0

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• How to display random lines from txt file

  Good morning (or evening all). I am creating an application and want to display random lines of a text file. I know how to create a text file using file connections, but how can I read the random lines of her?

  OK I got it.

  For beginners like me to have a problem in the future, I was not specify my path correctly. It is not enough to land your .txt in the /res folder and wait for the Simulator to load. You must load from SD card or device memory.

  Use the method found here:

  http://www.weask.us/entry/J2ME-BlackBerry-read-write-text-file

  to use it's as simple as that

  StringfName = "file:///SDCard/Blackberry/text.txt";

  String printLine = readTextFile (fName);

  label.setText (printLine);

  Somewhere in your project directory create a directory called SDCard (I did in my res folder).

  In the Simulator go to switch SD card, then load Select Directory and select the new directory of the SD card. This will create the structure of the SD card in the Simulator. Simply move your .txt in the SDCard/Blackberry directory and run your application.

• Display turns off

  Hello

  If I use the battery and I don't do anything on the keyboard or the mouse - after a short time (15 seconds), the screen turns off.

  How will I know the display turns off not when I use the battery.

  Best regards Thomas

  Right-click on your desktop, select property, then tab selection screen saver, select power, now put you your screen turn off time forever or any time you wish to in battery mode.

• Lightroom 6: display random flashes and Pixelation

  I've recently set up a new computer, with Windows 7pro, graphics Nvidia Quadro 1200 HP z240 & Samsung CF390 series 24 inch monitor curved, for Lightroom, updated the OS, drivers and related programs content before installing Lightroom.  I especially liked that the computer had no bloatware, so conflict of program should not be a problem.  Only when using with Lightroom high and active (partial or complete window display) will I get erase display random, momentary.  When the display is in place and only with LR running also make pixelation on the whole of the workspace of LR (see image).  I tried to reinstall LR and setting the parameters on the display, the video card and the computer, but nothing seems to work.  I welcome suggestions of what could be the source of this problem, because I was really looking forward to back up a computer 13 "laptop for use of LR.

  

  I had posted this suspect, it can be linked to the comparability of the Quadro 1200 and Lightroom.  Turns out that the problem is the cable between the computer and the monitor.  The graphics card has output mini DisplayPort (DP), while the monitor requires HDMI.  If it was the use of a mini DP to HDMI with HDMI cable or the quality of a, once I changed to a mini DP - HDMI cable, see all the problems reported have been resolved.  Thanks for your help.

• Display random banner

  Hello

  I have created a slideshow with 3 different banners. I would like to appear as random when the user refreshes their broswer.

  Currently, I have slide 1, 2 and 3 in that order. I also created the label for each slide in the timeline panel. Is there a script for me to do each of the slide to display randomly?

  Thank you.

  Hi shagon13,

  Uncheck "auto play" and add the code below to your stage/compositionReady event (this is assuming that your image labels are 'image1', "frame2", etc. It can read a random label on your timeline to scene root.

  function to get a random value in the range

  sym.randomNumRange = function (from, to) {}

  Return 1;

  return Math.floor (Math.random () * (- + 1) + a);

  }

  the variable value number random within the range

  sym.playFromValue = sym.randomNumRange (1, 3);

  play random value on stage root timeline

  SYM. Play ("frame" + sym.playFromValue);

  I hope this helps!

  Tim

• MAC Pro early 2008 display goes off during execution of CPU

  My Mac Pro screen turns off at random. I have two screens. Most when it goes out when the system processes more than workload, but he died sometimes even its not working any program. Any help would be appreciated.

  Details of the system

  MAC Pro early 2008

  2 2.8 GHz Quad - Core Intel Xeon processor: 8 strands

  32 GB OF RAM

  ATI Radeon HD 3870 - VRAM: 512 MB

  Cinema HD 1920 x 1200

  Cinema HD 1920 x 1200

  Note the time of the next problem. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of the problem. Suspicious message here.

  Also check the fan on the video card. It runs smoothly and free of dust?

• Satellite 1800-514-display is off every few seconds

  Yesterday, I have a Toshiba Satellite S1800-514. I have install the OS (Windows XP Home) again.
  Laptop screen turns off every few seconds. When I press the small button above the power switch (sensor for portable fence) there is a beep and the screen wakes up again.
  Same procedure again after a few seconds (5-50 sec).

  Is there someone who can explain what happened and how to fix this?
  The problem exists in all modes (Setup/bios dialogue, BACK, starting of WinXP, running current WinXP command prompt).

  Thank you!

  Hello!

  It's not easy to say what is causing the problem, it could be the inverter FL, chip graphic, LCD display...

  In your case, you should first test an external monitor. If the external monitor doesn't work properly, it s a problem with the graphics chip or motherboard. If the monitor does not work this is a problem of the FL inverter or LCD.

  Good bye

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Tecra A4 model PTA42E light display turns off

  I have a Tecra A4 - 01400YPT PTA42E model after the laptop, after 4 or 5 minutes the screen light goes out, and I do FN + F6 or F7 (more or less light) to turn it back on. This, it is 4 or 5 times, and after that, it will work ok.
  One had this problem? I tried updates the bios, but there most recent person! One thing that is strange is that this laptop doesn't have this little button above the screen to turn off the screen when we close of laptop display, because it seems that when we push this little button, and the light goes off!

  Hi Rene

  If you want to use the options of power management you need to install the Toshiba power management utility. Do you have this tool on your device or have you used the Windows XP power management?
  To switch between the modes of use different ca you use the FN + F2 key combination.

  Best regards

• Satellite L350 - display turns off during startup

  My screen laptop L350 itself turns off during startup after posting normally for about 2 seconds. It is possible to get the display back to normal if you go to sleep and then wake, but the new screen only stays on for about 2 seconds. This makes it almost impossible running the diagnostics.

  Does anyone have an idea what might happen?

  Hello

  Have you tried an external monitor?

  Perhaps the internal display is affected and needs to be replaced

• Equium A110-233 display turns off and after some time return on

  After that 2 weeks of using this laptop, it began display off Middle switching operation. The screen is barely visible, not enough to see the pointer to stop. Also ceases to stop orders is the power button. After a short time he returned once again. Is this a common fault, I have not yet searched the forum, need a quick fix / help for a new student to the University. Thank you

  HI Michael,

  It comes to definitelt completely not normal behavior for all Toshiba laptops. Your description of the problem indicates a problem with the inverter FL. It is a small device that offers the backlight of the LCD screen. If your laptop is only 2 weeks then it will certainly be under warranty then I suggest you only to contact the vendor of your laptop to make arrangements for it to be repaired.

  Kind regards