2.2 Performance short

Similar Questions

• Enigma W520 SSD

  I'm debating my W520 SSD options.

  1 Newegg has 512 GB Crucial M4 for $399.

  2. the 830 Samsung is the other option I am considering, but it is much more expensive.

  3. Finally, there is the Mushkin 240 GB mSATA for $359. Aside from the price and size, I hesitate to take this option due to limitations in mSATA and the W520 SATA II.

  I welcome the recommendations.

  I have discussed using mSATA so in order to keep my stock drive.

  However, I have over half a terabyte of storage on my laptop that I use external backup drives.  So I just bought the M4 512 GB Crucial, it's the same price to the Canada. If you buy it, people of the Crucial forum recommend immediately updating the firmware, I did it using a CD bootable created with the downloaded firmware software.

  Currently using Macrium reflect Free v5 to clone my stock Seagate 512 GB drive.  Also of the options Reflect imaging software to resize partitions of target as specifying alignment. Crucial 512 GB fits perfectly into the caddy drive in contrast to young readers of M4.

  I'll post in car numbers of performance shortly.

  see you soon

• Very slow speeds - Workstation 8.0.2 suspend

  I don't know if it something that I did, or the recent update of the workstation, but it is now still holding to suspend my (fairly large) guests. A guest of Vista is by far the most powerful, although a small enough guest of Windows 8 is also very slow.

  All my guests are split into 2 GB sizes and all have recently been "shrunk"---(erreur?). All are run under a Windows 7 host.

  Does anyone have advice to try to improve performance short dating back to 7 Workstation?

  > All what you have tried so far work?
  Hi Dave
  I had the same problems with suspend time WS 8 and 9.
  The only thing that has really worked to change my habbit use suspend rather than turned off when done with a virtual machine.

  With 9 WS, I expected that suspend one of my typical virtual machines may mean that the host can (often) to do nothing other than just suspension than a VM for a time up to 30 minutes or even an hour complete (often enough to see!)
  I tried everything I could think off, but nothing is really - I have never used WS so rarely that this version 9.

  I run 10 now and downtime are close to what we were used with 6.5 or 7

  If these problems seem to be fixed in WS 10 - at least for me.
  But before you change - control because WS 10 different problems

• Performance and benchmarking tools for short

  We are in the phase of Performance & Benchmarking of our short 3.0 - 9.2 PeopleSoft project. We use CloverETL to import data from a view TFTP to short. We load a large amount of data to really test the limits of short (approx. 50million rows). We use Integrator Server to run the ETLs, but the newspaper which is produced from the Integrator server is not very useful. Can anyone recommend a performance and a benchmarking tool for short that could give her more information on where time is spent during the ETL process?  It must also produce numbers of short Studio reference for large volumes of data. Does anyone know of a benchmarking tool that can give us specific times to set up a page in short (other than a stopwatch) Studio?

  For details about the time of request and response of Studio, you can enable performance metrics/logging.  View the monitoring query performance: configuration of the amount of data of registration measures [1] for more details.

  [1] http://docs.oracle.com/cd/E37502_01/studio.300/studio_admin/toc.htm#Configuring%20the%20amount%20of%20metrics%20data%20to%20record

• The names of the source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation.

  OK, so I don't know how it happened, but for some reason I have this folder on my external hard drive, that whenever I try to delete it, I get this error: http://i45.tinypic.com/1h6o7b.jpg
  Now, after receiving this error, I tried the obvious thing to do, rename the folder and try to delete it again, only to have the opposite effect on me. For some reason whenever I have any rename the folder it automatically creates another folder in the newly renamed folder. As you can tell by the small bar of directory at the top of the screen shot I tried to rename the folder repeatedly. So now I'm stuck with a bunch of files without value with nothing in it at all without being able to delete them. If I rename the folders, then when I get to the end it is what seems to be a folder but when I right click on it I have virtually no options as http://i46.tinypic.com/34xlzf9.jpg seen. This is really driving me crazy that I want to keep my files organized, so does anyone have any ideas what I could do? This is someone who has exactly the same problem I have the link at the bottom here. I tried to shift + delete to bypass the trash can and the last file on a network drive mapping.

  http://www.SevenForums.com/general-discussion/52235-filename-extension-too-long.html

  See this thread: http://social.answers.microsoft.com/forums/en-us/vistafiles/thread/438A20A7-A964-4325-B755-8B5D75DDD15B

  FileASSASSIN only works on real records and not records so that did not work and Unlocker did nothing.

  Any help is really appreciated.

  Thanks for the tip, but I failed to mention my disk external drive has been encrypted with TrueCrypt, so I was lying to even access the drive in safe mode. I did, however, eventually solve my problem of a Ubuntu LiveCD boot and mount my disk in it and remove it that way.

• Hard drive DST short test failed

  My HP Pavilion dv6-6c35dx laptop computer fails to load Windows. I ran diagnostics and got a quick access error (303). HP UEFI Diagnostics for hard drive failed the DST short test with failure code MBX47F 0006QU PXGK01 QT 60 03. Does this mean I need to replace my hard drive? Product ID of my laptop is A6Y53UAR #ABA and I have Win7-64 installed on it.

  Thank you

  Claudine

  Hello

  Your laptop is listed as coming with a HARD drive from 640 GB, but given that there is little difference in cost, you can replace this with a 750 GB option.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 64 of your maintenance & Service Guide.

  ***************************************************************

  Regarding the reinstallation of the operating system, you can create your own installer of Windows 7 USB drive flash as follows.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below--these Images are of a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Once completed, use the Microsoft Tool on the following link to create a USB bootable Windows 7 installer - you will need a 4 GB flash for this drive.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the Windows 7 flash player.  Select the Boot Options menu (usually f9).  Use the arrow keys to select the flash drive and press ENTER.

  If your laptop will boot from it, use the flash player to perform the installation, enter the activation key for Windows on the label of the COA in the request and once the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without the software load extra normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• HP 2000: Hard drive short DST check - failure

  A ran a diagnostic equipment and received the message...

  ID of congestive M4UF88 - Q 6, 2847 - MFGJXG - 60WB03

  product ID EOP73UA #ABL

  I have no idea what that means!

  Is my bread cell phone. I can't on my account admin, only one guest.

  I lose and it is better to set?

  Thanks for any help

  Hello

  The error code 24 characters is a disk failure short self-test and would indicate that hard is defective and must be replaced.  This is also consistent with the problems you describe.

  If you want to replace it yourself, it is quite inexpensive - a brief guide on this is below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive starts on Page 54 of your maintenance & Service Guide.

  As you have upgraded to Windows 10 and as long as the previous installation of Windows 10 had activated Ok after the upgrade, you can simply use another PC to create the installation media for Windows 10 and then perform a new installation - it is all detailed in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Regarding the existing personal folders on the failed disk, one possibility would be to place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• MacBook Pro lagg issues having an impact on the overall performance

  Hello

  I had problems with casual gal/minute gel on my macbook pro. The problem affects all programs and becomes especially annoying on programs such as Logic Pro X and Adobe Lightroom to photo editing and audio. For example on Logic Pro X will come back even if the error "system overload" did everything that I could to get a smoother performance on the program.

  After a few days looking for a response, I decided to do a general cleaning of my drive. I got more than 50% empty but performance improves.

  After that, I decided to do a new clean install of Mac OS x in the hope that this would solve my problems. I didn't not use time machine for backup, I just copied the files, I needed and have yet to put em turn the computer on.

  After 2 days my problem has not yet been resolved, I tried the PRAM and reset SMC, but it has no effect. Even now as I type with only safari open I short freezes every 10-20 seconds approximately 0.5 s.

  All solutions? I already ordered a new SATA cable to replace the one I think he could the cause of my problems.

  Here are my specs, ram and SSD are updated.

  MacBook Pro (13-inch, mid-2012)

  2.5 GHz Intel Core i5

  Intel HD Graphics 4000 1536 MB

  12 GB 1333 MHz DDR3

  1 TB SSD (samsung)

  I'm under that the latest version of El Capitan and the logic is version 10.2

  Hoping someone can help me

  If you still run with the clean install and you have the same problem. Then, you may be directed in the right direction. If you have an external drive Enclosures or cable usb to 2.5 sata adapter. You can put the internal drive in and check to see if the problem is still there. That will tell you if it is cable or not.

• iPad 1/2 fix for slow performance (finally!)

  After several years of desperately poor performance of my iPad 2 and original iPad, I finally understand how to behave reasonably well again.

  Before making this "correction" (you don't like it!), even my iPad menus have been slow to react.  After the correction, it rolls again.

  It turns out that native background apps, including Mail, can be incredibly hard on the performance of the iPad.  You wouldn't think that when the mail was not the app it would affect anything - but it makes.

  If you have a lot of emails (read or unread, is not serious), or have a large calendar and your menus are often jerky and the iPad seems to freeze every now and again once, for a few seconds, welcome to your 'solution '.

  Simply remove your accounts email and calendar of the iPad.  Simply access your e-mail via the web browser instead of using the Mail app can be all that it takes to find correct performance on your tablet.

  For maximum performance, you can continue, stripping of the iPad to each native function, you can: turn off notifications, set the background picture to black, disable automatic updates, all and in circles who does something.

  This explains why it's being a zero factory makes the iPad to work well again.  When we reset the iPad, there is no account e-mail attached to the Tablet, and it rolls.  We add our email account, and after a few moments, the Tablet starts download and return of the tablet to poverty once more.

  I was ready to throw both my iPad 1 and 2 by the window, but they are now in full service.

  Hope this helps someone out there.

  Your method of mail is a bit extreme, you may want to try all of my own below the solutions in the futture.

  All my old iPads and older iPads I started day/updated are ongoing enforcement just peachy keen on the last iOS without resorting to NOT use and delete content in the Mail application native iOS.

  In addition, with the native mail app, if you use iMAP, mail actually remains on the mail server. It is not, in fact, get downloaded or stored on an iDevice, himself.

  When you create new folders in iOS App Mail, you, in fact, create folders in your e-mail/s account on the servers of e-mail service. Not on your iDevice.

  The only reason that the Mail app could be the cause of performance problems, it is that you have set mail to automatically extract the mail at a time interval that may be too short and the iDevice is constantly ping servers of e-mail for short mail a few minutes or less.

  I have my Mail application set for manual removal, so my iDevices are not constantly check new email every few minutes or less.

  Also Push mail off if mail out Internet ping the mail server permanently, either.

  You really don't have to do what you did!

  There are other e-mail settings, you need to change.

• Tecra M3 - strange observation on performance of RAM (lack of)

  Hi people.

  I recently moved up to 2 x 1 GB of DDR2 (533) on this laptop, 2 x 512 MB, and one day a week, there are, or so I'm curious and ran the SiSoftware Sandra benchmark of band memory bandwidth. The result struck me as less than it should be - band values memory bandwidth both Int and Float were ~ 900 MB/s, similar to a unique key of DDR1 on a platform VIA the database of Sandra and fall considerably short of still a single stick of DDR1 on a platform of Intel 855 chipset - and yet it is a laptop running dual channel DDR2 (on the 915 chipset). He got even more interesting, when I removed one of the DDR2 sticks, to channel unique and observed the same performance. Utility as memtest86 +, CPU - Z and Sandra are all the report I use actually dual channel when there are two sticks installed, then why is there no return thrust? Also latency memory test results are extremely poor.

  Long story short, I have yet to understand the nature of this problem and, if is repairable, or is a material defect inherent in the design of this laptop. All tests without other stuff running, CPU - Z shows RAM running at 266 (533), 4-4-4-12 hours. BIOS is the latest available for the M3 w 1.20 / FBCF.

  Here's what I've tried (may be forgetting something, it will add if I remember):
  Tried two sticks and a stick, two my old RAM (which came with the laptop) and the new OCZ. Basically, all possible combinations are covered.
  Memtest86 + shows no error after hours of testing on the RAM.
  Charge Windows Installer, latest INF Intel chipset drivers etc, without change.

  Any ideas?

  I agree with Akuma.
  I put t know what performance gain memory you expect, but I doubt that you feel in normal conditions of use

• Control SMART and short CIOS not installed? New notebook

  Hello

  My parents sent me the 4440 s of HP Probook. I turned it on and it was working fine. No problem at all, but the hard drive was very small. Only 59 concerts. So, I took the hard drive from my old laptop (which still works. 300 concerts) and put it in the new laptop. When I turned it on this pop up.

  HP PC Hardware Diagnostics UEFI

  -----------------------------------

  Version 1.6.0.0 - BIOS

  then it gives me the opportunity to perform a verification of memory, hard disk check, language and output. Memory passes test, but when I do the hard disk (quick audit and comprehensive check) check it says controls SMART and short CIOS not installed.

  When I click on leave peripheral saus to boot not found, please install system of operating on hard drive.

  Here is some of the best. I took the hard drive out and put the new hard drive and little return in the new probook, and the same message appears. I don't know why. I can't figure out what it could be. My father-in-law has a good knowledge of computers, but unfortunately, on the phone it cannot be a great help.

  Someone save my new laptop beautiful!

  The diagnostic program has done a small partition on the hard drive to it. When you have removed it, so that has UEFI. You need to reinstall as the only one available is the one stored in the BIOS.

  Here's that and your BIOS update.

  This is for Windows 8.1 as you say this is a brand new, that is my logical guess.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5269090 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125646_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  UEFI: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5269090 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125304_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  I hope this helps. I used the basic model for it, and it should work. If you have any problems, send the product so that we can check the cross. However, there should not be a problem.

  JHS

• iMac very slow and short HOT.  the fan runs almost constantly

  My iMac 2011 short middle slow and often gets "the ball" of the computer runs hot (uncomfortable keep the hand on top) and the fan is almost always running.  Activity monitor shows the low CPU usage. Any ideas?

  EntreCheck report is due to:

  EtreCheck release: 2.9.4 (254)

  Report generated 2016-02-18 12:04:46

  Download EtreCheck from http://etrecheck.com

  Time 03:31

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  iMac computer is slow, get the beach ball often enough and the fan runs almost constantly because the computer heats

  Hardware Information: ⓘ

  iMac (27 inch, mid 2011)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac12, 2

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X Yosemite 10.10.5 (14F1605) - since the start time: about 5 days

  Disc information: ⓘ

  WDC WD1001FALS-403AA0 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (577,56 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  HL-DT-STDVDRW GA32N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  HP Photosmart 8400 series

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Apple internal memory card reader

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (1.5.1 - 2016-02-09) [Support]

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.4 - 10.4 SDK - 2016-02-09) [Support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.4 - SDK 10.5 - 2014-01-27) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

  Startup items: ⓘ

  HP USB EWS Gateway: Path: Library/StartupItems/HP USB EWS Gateway

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  com.apple.AirPlayUIAgent.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.EscrowSecurityAlert.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.cmfsyncagent.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.photolibraryd.plist [killed]

  com.Apple.printuitool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.SBD.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 141 tasks Apple

  [operation] 58 tasks Apple

  13 killed process lack of RAM

  Launch system demons: ⓘ

  com.Apple.awdd.plist [killed]

  com.Apple.ctkd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.icloud.findmydeviced.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.nehelper.plist [killed]

  [killed] com.apple.periodic - daily.plist

  [killed] com.apple.periodic - weekly.plist

  com.Apple.wdhelper.plist [killed]

  [loading] 173 tasks Apple

  [operation] 80 tasks Apple

  9 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.maintain.CocktailPurgeInactiveMemory.plist (2013-11-21) [Support]

  [failure] com.maintain.CocktailSystemEvents.plist (2012-07-08) [Support]

  [loading] com.maintain.LogOut.plist (2014-02-17) [Support]

  [loading] com.maintain.Restart.plist (2014-02-17) [Support]

  [loading] com.maintain.ShutDown.plist (2014-02-17) [Support]

  [loading] com.maintain.Sleep.plist (2014-02-17) [Support]

  [operation] com.maintain.SystemEvents.plist (2014-02-17) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-01-28) [Support]

  [loading] com.maintain.CocktailScheduler.plist (2016-02-18) [Support]

  [operation] com.memeo.WDMemeod.plist (2007-07-30) [Support]

  [loading] com.rogueamoeba.hermes.plist (2010-09-28) [Support]

  User launch officers: ⓘ

  com.apple.MobileMeSyncClientAgent.plist [failure]

  com.apple.SafariBookmarksSyncer.plist [failure]

  [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

  [operation] ws.agile.1PasswordAgent.plist (2013-12-07) [Support]

  Items in user login: ⓘ

  iTunesHelper UNKNOWN (missing value)

  HP Photosmart Menu Application (/ Applications/Hewlett-Packard/Photosmart/HP Photosmart Menu.app) (2006-10-22)

  Airport demand of basic Station Agent (/ System/Library/CoreServices/AirPort Base Station Agent.app) (2014-10-07)

  Request for SmileboxTray (/ Applications/Smilebox.app/Contents/Resources/SmileboxTray.app) (2016-02-12)

  The messages application (/ Applications/Messages.app) (2015-08-19)

  WDMemeoAgent Application (/ Library/Application Support/Memeo/WD anywhere Backup/Agents/WDMemeoAgent.app) (2009-06-24)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app) (2010-09-17)

  Director Docker Application (/ Applications/Hewlett-Packard/HP Photo & imaging software/HP Photo and imaging Director/Director Docker.app) (2006-10-22)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword4 - helper (2016-02-09)

  com [running]. Growl.GrowlHelperApp.89492 (2006-12-30)

  com [running]. Memeo.WDAnywhereAgent.87504 (2009-06-24)

  [operation] com.apple.xpc.launchd.oneshot.0x1000000a.EtreCheck (2016-02-14)

  [operation] com.smilebox.Tray.61376 (2016-02-12)

  [operation] jp.co.canon.cijscannerregister.17640 (2011-05-04)

  Plug-ins Internet: ⓘ

  Flip4Mac WMV Plugin: 2.3.0.14 (2009-09-28) [Support]

  FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  QuickTime Plugin: 7.7.3 (2016-02-09)

  Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  AdobePDFViewer: Unknown (2010-04-23)

  Default browser: 600 - SDK 10.10 (2015-07-16)

  Web of Google Earth plugin: 6.1 (2011-10-17) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-04) [Support]

  DirectorShockwave: 12.1.7r157 - SDK 10.6 (2015-02-05) [Support]

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

  User Plug-ins internet: ⓘ

  RealPlayer Plugin: unknown

  Safari extensions: ⓘ

  1Password (2016-01-25)

  3rd party preference panes: ⓘ

  Flash Player (2016-01-28) [Support]

  Flip4Mac WMV (2009-09-28) [Support]

  Growl (2006-12-30) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 421,79 GB

  Destinations:

  Time Capsul of Alan W. Voges [network]

  Total size: 2.00 TB

  Total number of backups: 65

  An older backup: 08/29/15, 06:56

  Last backup: 18/02/16, 11:39

  Size of backup drive: adequate

  Backup TB 2.00 size > (disc 421,79 GB X 3)

  Top of page process CPU: ⓘ

  4% WindowServer

  2% fontd

  2% safari

  1% kernel_task

  1% sysmond

  Top of page process of memory: ⓘ

  633 MB kernel_task

  Com.apple.WebKit.WebContent (4) 299 MB

  172MO Mail

  Safari of 147 MB

  Overview of 78 MB

  Virtual memory information: ⓘ

  504 MB of free RAM

  3.50 used GB RAM (1.12 GB being cached)

  174 MB used Swap

  Diagnostic information: ⓘ

  February 16, 2016, 12:31:30 Library/Logs/DiagnosticReports/Mail_2016-02-16-123130_[redacted].cpu_resource. diag [details]

  /Applications/mail.app/Contents/MacOS/mail

  February 16, 2016, 08:15:06 /Library/Logs/DiagnosticReports/Inkjet6_2016-02-16-081506_[redacted].crash

  /Library/printers/HP/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Performance very slow satellite M60

  Hi, I have an m60 with 17 "display, go6600 nvidia 128 MB, 2 GHz cpu, 512ram, 80 GB hard drive
  All drivers/bios are up to date... but I'm very disappointed, as overall, the machine is quite slow...

  There is a kind of latency on everyhting do you... loading the software, at the opening of new messages in outlook, text selection, open files, etc etc...
  I tried everything, including a complete reinstallation of windows, but nothing...

  I realized that the machine was hot enough in the box wireless then decided to disable it in the control panel connection options. What has improved the overall performance... but it's still not what you expect from this type of machine.

  My other machine pentium 3 is almost faster with only 256ram... HARD drive seems to work a lot with a few short moments of "freeze up" like that, nothing happens and nothing can be done on the machine... sometimes there is also a sort of flicker of the screen as if had changed the settings of the screen... across the keyboard/keypad area becomes very hot , and often runs even if outlook is open...

  The keyboard is also very difficult to use, it really takes to each in the Center and almost pressed button for one second to get out the letter.

  I'd be really grateful if someone of you could give me some advice! machine at just 6 months old and is a replacement already the one I had first with the CPU remains at 100% all the time after starting just. Is there a problem with the M60?

  Thanks for the comments and advice

  Hi Pete

  As you know most laptop performance depends on configuration personal because laptop comes with factory settings should work well. Many users have own and favorite configuration and sometimes it can totally choke with the operating system and make it very, very slow and annoying for its use.

  As much as I know the M60 is a pretty powerful unit with a good graphics card and the performance of God game. The keyboard problem is known, but it must also be resolved through replacement of keyboard (M60 is the first laptop with NUMPAD).

  I'm sure that with the right software, your device configuration will work very good and stable.

• HP ENVY 15-j023cl Notebook PC: PC off (supposed overheating, no message appears) after a short period of time

  Hello

  A problem that has been doing worse and worse for me was that my PC turns off completely after a short period of time, now about 1 hour. I used to have the same problem, however, it turns off after 4-5 hours, and after that it is completely stopped for a few hours, he'll be back to normal. I read that dust accumulation can be a problem, although I see no dust in the vents. Do you advise me to open the computer and dust off the fan itself inside the computer with compressed air? Or are there other possibilities of dust collection problems will not fix?

  Before I provide documentation for troubleshooting @Pokeyster, I would like to take a moment to welcome you to the HP support community!

  I'll do my best to help you to solve the problems of closing you met on your HP ENVY 15 - j023cl Notebook PC.

  You asked if the dust can be a factor. The answer is absolutely! I saw him in the past when the reason for the complication was dust in Notepad. I recommend that you keep the free portable dust on a frequent basis.

  Please use the links in the questions below to troubleshoot and then re-post with answers to troubleshooting questions/results.

  Have you tried running in Safe Mode?

  Did you do a BIOS reset?

  Have you tried to do a disk defragment?

  Have you tried to do a Disk Cleanup?

  Please try to clean the events your Noteobok MNI

  Is the noisy fan or turn constantly?

  Is the hotter than normal PC?

  Have you tried tests to hardware failures?

  Here are a few documents for you that can help:

  • Computer hangs or freezes
  • Set the slow system performance.
  • Reduce the heat inside the PC to avoid overheating

  If this post helps you solve the problem, please pay to the front by clicking on the button accept as Solution , right of the thumbs up icon. You can click on the Thumbs up icon to show your appreciation for my efforts today!

  If you need assistance, I would be more than happy to continue to help. When you re - post, please provide me with the detailed results of the above troubleshooting.

  Thanks for joining in!

  Have a wonderful day!

• SMART short self-test - on the second hard drive

  HP Pavilion Elite e9270t - 3 yrs old, Win7.

  Became the error SMART self-test short the original drive so I installed a replacement and transferred files.

  I get the same error on the second h/d. I have my doubts that the second disk is having the exact same error and wonder if the s/w test is actually the problem.

  It could very well be the connectors that gives you the question instead of the HARD drive itself. I would run the HARD drive test in BIOS instead of the short test.

  Try this:

  1. Plug the AC adapter into the computer if it is not already connected.
  2. Turn off the computer and wait five seconds.
  3. Press the power button to start the computer and repeatedly press the F10 key to enter the BIOS Setup menu.
  4. Use the right arrow or left arrow keys to navigate the menu selection to find the Auto test primary hard drive option. Depending on your BIOS, it is under diagnoses or tools.
  5. Select self-test primary hard drive, and then press the Enter key to start the test.

  Figure 1: Example of a primary hard disk self test screen

  
  

  The hard drive self test performs a Quick Test , followed by a complete Test. During each test, the window displays a status bar and a scheduled for completion

  Let me know the results of this test.

  THX