Similar Questions

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• To connect to a shared folder between PC - error Code 0 x 80070035 "network path not found."

  I have a client with 8 computers on a workgroup network.

  Among youth, 2 computers not talking to each other or to connect to shared folders on the other drive. Both computers will speak on other computers on the network (wireless).

  I looked at all the solutions that have been validated for the message Error Code 0 x 80070035 "network path not found." and none of them have solved the problem. I can't ping one computer to another. I noticed that when troubleshooting on the PC (both are desktop windows 7), 'client' that when I ping the other PC it returns an IPV4 (192.168.x.x) address, but when I ping another PC on the network returns an IPV6 address. I tried to turn off IPV6 adapter in the network adapter settings. It made no difference. I searched several 6to4 adapters in Device Manager, but only 1 exists. Turn it off did not seem to make a difference. As I said, both PC's are accessible by other computers on the network (wireless), but they cannot access each other.

  Restart both computers several times (including cold starts and stops).

  The only one I don't have not tried yet is releasing and renewing the IP address on both.

  Any suggestions?

  Well I fixed it myself.

  In this case, there was a number of things I've done.

  First of all, I checked to make sure that the firewall is not the issue. It wasn't.

  Secondly, I checked the network connection to see if it has been set to the office network. One of them was, and that we have tried to connect to a was created for the Public network. Who changed the network and restarted.

  Who has not solved the problem.

  Finally, in desperation more than any other thing, I restart the network modem.

  Guess what? That fixed the problem.

  So, I guess it was a problem of ARP table or some other problem. When I tried to ping from the "client PC' on the shared drive PC, the IP address was 192.168.1.65. When I got the customer go to the drive shared PC and check the IP address it is 192.168.1.69.

  Restart the modem and the "client PC" has solved the problem.

• Home network problem: 0 x 80070035: network path not found.

  I have problems with my home network; my laptop is unable to access the files on my HTPC

  More precisely:

  Laptops and PCs are running Windows 7 Ultimate. My laptop is connected to the home wireless network, the PC is connected through the LAN. Router is a Netgear DG834GV. Both computers have fixed IP addresses. They are part of the standard workgroup workgroup. There was formerly a group residential, put in place, which worked very well. We also have a Vista laptop that does all the unusual problems. Until a few days ago, the whole Setup worked perfectly. I could previously access/copy/distribute multimedia content, play on the PC via Zune music on my laptop and print from my laptop to the computer, but now I am unable to do one of these. The other laptop still works fine.
  From the network on the PC screen, I can see the files from the laptop and access.

  However, since the network on the computer screen laptop, I see the PC, but when I try to open it I get the error "Windows could not access \\MEDIACENTER. 0 x 80070035 the network path was not found. "I ping the PC with the IP address and name, and I can even remote to the computer desktop.

  ipconfig on the laptop did something funny...

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 139:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 143:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 140:

  ... up to 200. I can't that assume it goes back to #1 as well.

  After a few suggestions on here I just went through the enable netbios over TCP/IP, but now I can't see even the PC! Still can ping and access internet tho.

  Any suggestions as to what may be the cause?

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.

• Synchronization of blackBerry Smartphones Medis "network file not found."

  Impossible to find a solution for the following.

  Media files are stored on a NAS drive and mapped Drive 'R' on the PC

  Organizing media is iTunes (Win), perfectly handle all files, playlists etc.

  The sync to BlackBerry Desktop M (6.x) media together as "itunes."

  First time, it worked perfectly, files moved to Blackberry as a whole. Later, once, Director of office deleted all files and since on the media manager tab is a status message after each music file "network file not found."

  Win7 64

  Any suggestion?

  Thank you

  seems the version number. moved to build021 (6.0.1.x) and it works perfectly again

• C$(\\192.168.1.253 networks) (O :) network path not found.

  Using a new dell with windows 7 - I get a message: Mircosoft windows network: network path not found.

  Network location (1) C$(\\192.168.1.253) (o) what does that mean?

  It's a path mapped to a share.

  Click Start > computer > you should see this path under 'Computer' > right click on this share > select disconnect

  Reboot and see if the message reappears.

  I hope this helps.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• When I go to add web fonts fonts are not found? How can I change this?

  When I go to add web fonts fonts are not found? How can I change this? When I go to add web fonts fonts are not found? How can I change this?

  fixed after restarting!

• The following names are not found and cannot be added

  Hello

  I get this error "the following names are not found and cannot be added" when I tried to add newly created user for authorization of vCenter/group.

  I am using vCenter 4.1 with the guests of ESXi 4.1 & ESX4.1

  Time is synchronized with the ntp server in DC and vCenter & ESXi hosts.

  Any help to solve the problem?

  The problem caused by the AD domain and vcenter with the same sid, once change vcenter for a different sid, the problem has been resolved!

  How to change the SID on Windows 7 and Windows Server 2008 R2 using sysprep?

  http://www.Brajkovic.info/Windows-Server-2008/Windows-Server-2008-R2/how-to-change-SID-on-Windows-7-and-Windows-Server-2008-R2-using-Sysprep/

  You can download the PSGETSID

  Download tools named "PsGetSID" and make sure that your windows 2008 SID is not even. You can download it at the following ADDRESS:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897417

  Thank you best regards &,.

  BSR Krishna

• Im trying to add a windowx xp pro pc to windows 2008 r2 domain controller. He said: network path not found. Help, please

  Im trying to add a windows xp pro pc to Windows AD 2008R2 controllers.

  All the settings like DNS etc are correct on the target computer, but when I give the domain admin credentials to add the computer to the domain, it says "the following error occurred while attempting to join the domain a.b.c.d. The network path was not found.
  Please notify

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Latitude C600 modem/network interface not found in XP Pro

  I have a Latitude C600, PIII 850 MHz, 256 MB of Ram.

  The operating system is Windows XP Pro sp3, 32-bit.

  My problem is that the network/modem card on board do not work and are not present in the Device Manager.

  Some other positions mentioned to install the chipset drivers, XP pro does not require not the drivers of the C600 chipset, and I found that the only offered on the site of the drivers/Dell support are for Win 2000.

  Dell support site suggests that work on board network/modem card, but I've not seen this yet.

  I am currently connected to the internet using a Xircom 10/100 Nic/modem card in the pcmcia slot, but I would like to have a card wireless here instead and use the integrated to an Ethernet network interface.

  I also posted this on the category of computer laptop-general hardware.

  Any input will be appreciated,

  Thank you

  A. Einstein

  
  

• Cannot open first pro because he says drivers are not found. Help!

  I had adobe cs5 first pro on my computer for years now and there are a couple of weeks, it stopped working.  A pop up appears and indicates the following (first adobe has not found any capable video modules.  Please update your video display drivers and try again).  I can not even java to work, or download more than any simple vids or mp3.  My computers says that all updates are underway so, how can I find a driver that is corrupt, outdated or does not work?

  Hello

  Computer brand/model?

  Have you tried to uninstall/reinstall the software?

  Adobe Premiere Pro returns an error during startup, which indicates that it can not find capable video game modules.

  https://helpx.Adobe.com/Premiere-Pro/KB/error---preludevideo-play-modules.html

  Right-click on the program icon > select Properties

  Click on the Compatibility tab

  Select Windows 2008 Server (Service Pack 1)

  Select run as administrator

  Click on apply, Ok

  See Solution on this thread:

  https://forums.Adobe.com/thread/1001579?start=0&TSTART=0

• Wireless networks are not displayed!

  Just replace a hard drive in a friends address. I did a clean install of W7 and did all the updates via a wired connection.
  My wireless network does not, any more than all the networks around me I see on my personal laptop.
  No conflicts in Device Manager. Device is not working properly.
  I can enter my network name and key to manually authenticate and connect, but it's not good to travel and use in public places.
  I was not able to find a solution anywhere.

  Any suggestions?

  Found the answer on ask.com
  Had to open cmd and run commands...
  Empty and reset some things, restarted and seems to work now.

• Satellite A300 - WLAN networks are not available

  I have a satellite with an A300 unit init system and I'm trying to connect to the internet via Wi - Fi.
  My internet connection is all very well already phoned the service provider that everything is fine with it.

  When I try to connect 2 a network... no networks are available?
  Any1 no what I have to do?

  Wireless network card is installed correctly?
  Wireless network card is enabled?
  Check it with FN + F8.
  Is WLAN led on when you scan area available networks?

  Maybe you didn t turn on the wireless network card.

• Wireless network are not not on possible networks

  Hello

  I am currently in Italy and having problems with the router to my apartment.  The network will not appear on the list of possible networks, even if I have the laptop located directly next to the router.  I can connect via a cable, but it is of little use because the router is in the House of someone else.  I can also connect near unsecured networks, but would prefer to use that encrypted in the apartment.  My iphone is connected to the correct network and phone as connected friend Google.  I tried to reboot everything and switching between using Intel PROset and Windows to manage wi - fi connections, but without success.  Not the most tech savy person, so not much else I can do besides.

  I am running Windows XP SP2 on a Dell Latitude D630.

  Thank you!

  Thanks for the suggestions - I was unable to verify the configuration of the router.  The problem was that the router was set to channel 13, while my network card would take only 11 channels (anyone have an idea why this is?-my iphone and Mac of the other roommates had no problem with that)

  I managed to install a new driver, and I can now connect to the wireless network.