2 application tries to communicate with BES

Similar Questions

• Errors when trying to communicate with the server administrator

  I'm deploying fusion web app to the stand-alone weblogic server (Version is 10.3 and its hosting OBIEE), but JDeveloper (Studio Edition Version 12.2.1.0.0) reports the error below.

  [01: 27:03] - incomplete deployment.

  [01: 27:03] [SPI: 260111 deployment J2EE] errors were detected while trying to communicate with the management server.

  [01: 27:03] the requested attribute is not exposed via JMX: isDynamicallyCreated: com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  [01: 27:03] com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  However, the application server is successfully passed all the tests, the result below.

  JSR-160 LENGTH tests... success

  Tests of JSR-160 DomainRuntime... success

  JSR - 88 tests... success

  JSR-88-LOCAL tests... success

  Test server MBeans model... success

  ... Controller App tests success

  Tests of JSR-88-DEP-MGR... success

  JSR-88-DEP-MGR-LOCAL tests... success

  Tests of JNDI... success

  JSR-160 tests edit... success

  Tests of HTTP... success

  11 of 11 successful tests.

  I am able to successfully connect and deploy applications on the same JDeveloper weblogic - version 11.1.1.7, but I am facing issue with JDeveloper - version 12.2.1.0.0.

  Any help is very appreciated.

  
  

  Thank you

  Vishwa

  Hi Vishwa, there.

  using JDev 12.2.1 to create fusion web applications means that you use ADF

  12.2.1 and you try to deploy this app on WLS 10.3 which

  knows nothing about ADF 12.2.1. This means that you must

  install and configure the ADF 12.2.1 libraries running on your application

  Server prior to deployment.

  Before that review certification ADF matrix to determine the

  version minimum 10.3 where you can run ADF 12.2.1-

  http://www.Oracle.com/technetwork/developer-tools/jdev/documentation/122-CERT-2708091.html#ApplicationServers

  However, you should check if installation 12.2.1 ADF will not

  installation of OBIEE break.

  Before you dig in fact ADF 12.2.1 installation can you pack

  your application developed in JDev 12.2.1 and deploy from the admin

  Console?

  HTH,

  A.

• trying to communicate with a computer via an RS232 interface.

  Hi, I would like to communicate with my computer via RS232 DB - 25 side of machine that is configured as a DCE and DB - 9 my side PC as DTE, the computer only uses pin 2 (serial data in), pin 3 (serial data out) and PIN 7 a pattern. I wired the pins straight through except the ground which is in the DB 9 pin 5, so I tried to connect pin 2 pin 2 and 3 pin to pin, pin 7 to pin 5, but I couldn't get through my machine, then I tried 3 machine spindle pin 2 of my pc , machine pin 2 pin 3 pin 5-7 pc, unfortunately cannot also. I set everything correctly, as I think, but somehow could not do.

  (in the if said manual pc a DB9 so connecting db-9 to db-25 cable modem) - what a sense.

  I'm asking for help on this issue. Thanks for any help.

  Yes, of course do you. Who is stated in the manual. In MAX, you would use \r\n.

• Trying to communicate with WinAmp

  Hello

  I'm trying to connect with WinAmp (MP3 player) via the sendmessage function in User32.dll

  So far, I can send commands like play, stop, forward, play the next etc. but sends a file to play name does not work.

  It's the structure of the command:

  #define IPC_ENQUEUEFILE 100
  / * This is sent as a WM_COPYDATA with IPC_PLAYFILE as the dwData member and the chain
  * file / playlist to be queued in the lpData Member playlist editor.
  * This will enqueue just the files, because you can use this to put a playlist.
  * It not clears the current playlist or change the State of reading.
  **
  * COPYDATASTRUCT CD = {0};
  * cds.dwData = IPC_ENQUEUEFILE;
  * cds.lpData = (void*)"c:\\test\\folder\\test.mp3";
  * cds.cbData = cds.lpData ((char*) lstrlen) + 1;  include a space for null char
  * SendMessage (hwnd_winamp, WM_COPYDATA, 0, (LPARAM) &cds);)
  **

  0X4A = WM_COPYDATA

  In VI, you can see what I've done. Before you run WinAmp VI must be already started. The 'windowfound' led should be on.

  I have tried several things but no luck so far.

  Can someone help me with this problem?

  But you are clustering it! If do you a cluster and flatten out it, it would be
  similar appearance.

  COPYDATASTRUCT CD = {0};
  cds.dwData = IPC_ENQUEUEFILE;
  cds.lpData = (void*)"c:\\test\\folder\\test.mp3;
  cds.cbData = cds.lpData ((char*) lstrlen) + 1;  include a space for null
  char
  SendMessage (hwnd_winamp, WM_COPYDATA, 0, (LPARAM) & cds);

  The data member is a member of the lp, which indicates that it is a pointer to the
  string, not the string itself. In addition, if look you in the header files
  C, the exact definition is:

  struct COPYDATASTRUCT {}
  int dwData;
  int cbData;
  lpData, int;
  }

  Thus, the size of the string should precede the string, not after. Example c.
  code is always correct, because they indicate the values of the elements, the order is
  irrelevant.

  Use DSNewPtr (Size) to get a pointer to a block of memory. Use MoveBlock(*src,)
  * dest, size) to move your channel to this block (do * CBC an input string,)
  and * the new pointer dest)... Don't forget to call DSDisposePtr(*p) to
  free the memory when finished.

  The prototypes are in the labview under cintools\extcode.h directory. In
  the node libray call, you simply type "labview" as the name of the library.

  Your 'cluster' should have three values U32 (or I32), dwData, cbData.
  lpData. You can simply make a cluster with three parameters, and set
  the dll to adapt to the type.

  Kind regards

  Wiebe.

• Support the contact - person I'm trying to communicate with a person that I paid for my subscription to the CC and it is to show that I have not bought the product.  The page to contact technical support is a labyrinth and continues to loop back to the sa

  I am trying to contact a person that I paid for my subscription to the CC and it is to show that I have not bought the product.  The page contact technical support is a labyrinth and continues to loop back to the same place without giving me any contact information! Help, please!

  Move the debate towards Adobe Creative cloud

  We have checked your account details, we see active participation of Photography Photoshop program.  Please make sure that you are connected with correct Adobe Id to Adobe.com to get it. You can check:Adobe Store | Order FAQ and your online payment

  To install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html, you can also Learn how to enable or disable Adobe applications from here.

  Kindly let us know in case you have further questions on your membership.

  I hope this helps.

• Trying to communicate with TCP/IP through DURATION VISA

  Hello

  I am creating a vi to connect with a laser via TCP/IP.  The laser has a fixed IP address and using my development computer with NIVISA 14.0.1 installed with Labview 2014, I can manually enter the IP address in MAX and the works of vi correctly.  However, the vi must be run as an executable file on the Production computers that will only run engines LabView and installed VISA.  The vi is set up with a drop-down list for resources VISA recognized and is usually filled with COM and LPT ports.  The fixed IP is visible in the drop-down list of the development computer, but I can't find any way to incorporate it into the only version of the runtime.  How can I do this?

  Thank you!

  You can freely install MAX. You should have added it when you generated the installation program for the exe. The installer must have the LabVIEW execution, the runtime VISA, MAX and the hardware configuration of MAX. If you have not created an installer, which would be a mistake.

• Can I communicate with a Micrologix 1400?

  I'm trying to communicate with an Allen Bradley Micrologix 1400 by using the OPC Client object and the unique node RSLinx as my OPC server.  I have Lookout version 6.1.  So far, I was able to navigate the controller to Lookout, but diagnoses in RSLinx shows the connection switch between active and inactive.  Someone has he done it before or to know what is the problem?

  Ryan,

  The problem was with my server communication settings.  After changing values, I was able to communicate.

  Thank you

• Communicate with the symbols of the main timeline

  Hi, I created a movieclip and exported to Actionscript. I have a few cases of the new symbol (class) on the main time line and I have a few

  The timeline class code. Im trying to communicate with an instance of movieclip that is in the main timeline, but for some reason im getting

  a mistake. the name of the movieclip instance is mcGalleryWin. im sure that the keyword root has worked for me before in a similar situation

  but for some reason, this is not not workin now...

  I tried to trace (root) of the class and I don't get the main timeline.

  Code:

  imageLdr.load (imageReq);
  imageLdr.contentLoaderInfo.addEventListener (Event.COMPLETE, firstImageLoaded);
  function firstImageLoaded(event:Event) {}
  root.mcGalleryWin.addChild (imageLdr);
  }

  error:

  1119: access of property may be undefined mcGalleryWin through a reference with static type flash.display:DisplayObject.

  Try:

  MovieClip (root).mcGalleryWin.addChild (imageLdr);

• SERIOUS HELP NEEDED: How to prevent an application to communicate with the internet?

  Hey guys, I use an application called VLCStreamer on my iPad and I just want to know how I can help but communicate with the internet. For example, I don't want VLCStreamer to be contacting the author of the application.

  Thanks for any help!

  Put your iPad in airplane mode.

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• I got the job of Corel Wordperfect Suite 7 on Windows XP. I tried to work with this application on Vista, it does not work.

  I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

  I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

  ERL
  Rob

  I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

  I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

  ERL
  Rob

  Keep in mind that WordPerfect 7 is a very old version - eight versions. Usually very old versions of almost any program do not work on newer versions of Windows. I don't know about you, but I suspect that you must upgrade to a newer version of WordPerfect.

• I'm trying to get my computer to communicate with the printer so it iis 'tail' documents.

  I'm trying to get my computer to communicate with the printer - for the moment that it is 'Queue' documents.

  What should I do to get the printer to work?

  Hello

  1. What is the brand and model of your printer?
  2. how you have connected the printer?

  Download and run the tool Fixit of the article mentioned below and check if this solves the problem.

  Problems printing and printing errors:
  http://support.Microsoft.com/GP/printing_problems

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Registration of a client device in a java application with BES/MDS

  Hi all

  I put this thread here that my application is a java application, but it could have also listed under the section development push as well.

  I have a part of my application that needs to connect to the BES to a certain company to receive push messages. The app works fine establishment of a listener and receiving thrusts by the MDS Simulator, and I also added more code to register the device with the BIS (BPA) from BIS example of Simon Hain.

  Initially I thought that the he had to register with the BES, just like how register us with the BIS except change some settings, as do not add an app ID etc. I have created a basic application of the Z10 push and remember that coding is the same for the BIS and BES except that the application ID and address BIS have been left blank. But now, after some research, I think with Blackberry 6/7, to onboard with a BES connection (unless a middleware program requires us to send some data onboarding) to receive a Push message, we just open a connector to the port number using the deviceside = false setting and wait for help to arrive.

  I looked on the net and forums to directly answer this question but can't seem to find one, that's why I'm asking here confirm.

  Quite simply, taking example of Simon for base, if I plug a client device to a BES (where the server application didn't need any onboarding of the device, its function is to, just send a message to the JSON style to the MDS with the device PIN to the device) would need to register the client with BES/MDS device, as Simon does with its function of registerWithBpas() to register with BIS/BPA , or could I just go directly to opening a connection to a port with the parameter; deviceside = attached false and wait for a Push message to arrive.

  Of course the devic has already been saved in the BES with its ID, e-mail address of the person using this device, etc.

  Simon if you get a chance to personally respond to it, that would be great!

  Thank you all for your time and your help.

  Rob

  Do not enter the unit, simply push the spindle for the MDS and push message will appear on the device.  As you rightly point out, the device is already on the BES and must use the MDS to access the internet in any case.

• behavior of application with BES flavours IE for Exchange, Domino and GroupWise.

  Hello

  I have a java application to networking than woks with BES for Exchange. Can I assume that the same application works also with other i.e two flavors Domino and GroupWise.

  my application uses MDS and makes use of the BES network.

  Please clarify for me.

  Thank you

  Sri.

  The Mobile Data System (MDS) component of BlackBerry Enterprise Server offers the same features for Exchange, Domino and GroupWise flavors.  An application using the SDM as transport should work the same, regardless of the messaging platform.

• can't download or to install adobe reader, says already have a newer version installed, I have tried everything suggested, nothing works and I am uable to communicate with anyone!

  I'm unable to download or to install adobe reader, says I have a newer version installed, I tried ALL recommended, nothing works and am unable to communicate with anyone... Help, please!

  Looks like you need to download and run the appropriate AcroCleaner version: Download Adobe Reader and Acrobat tool - Adobe Labs .