2-axis control panel before LabVIEW

Hello

I want to know if there is a Panel control before axis 2 in LabVIEW (something like simple virtual joystick) or on the community use. Emergency assistance will be greatly appreciated.

Thanks in advance.

-Lab

Hello

I don't know if this will help.

But take a look at the Flight Simulator.

Tags: NI Software

Similar Questions

  • Configuration panel before LabView 8.5

    Hello

    I managed to change the cover of my main VI accidentally (I think that shortcut keys).

    Can someone tell me how to sort this please? Please note a black band on the top and the scrolling offset in the file bar attached.

    Thanks in advance,

    aCe

    Hello

    You can attach your VI so I can have a look and try and change the appearance?

    I don't know a quick fix to simply return to its original state. You will perhaps copy and paste the block diagram to another VI and reconfigure the front panel on the new VI.

    Concerning

  • Before the controls Panel reset each VI run.

    Hello

    I have a test unit, MISTLETOE is designed in Labview; Measures pressure and writing for a Word report are required. I currently have a problem regarding the behavior of VI when I run. It is explained below:

    All my settings front and controls which give before you run the vi reset empty Windows when I run the VI.

    Also, I first thought that, ok, same if control values disappear, as long as they written in the report, it is very good. But, it happens that easily. When I have the controls on the front panel before you run the VI of power and then run the VI, I must stop the VI and run it again for them to print the report.

    The model is like this:

    1. go the front panel control values.

    2. to run the VI ===> Panel control values before disappearing.

    3. perform the test, stop the VI and print the ===> no control value to print.

    4 restart the VI without going all control values.

    5. run the VI ==> controls front are empty (of course, because no values have been entered).

    6. perform the test, stop the VI and print the report ===> initially entered control values to print.

    So, essentially, before control values not only disappear when the VI is executed, but there are also two that works for the values to enter in the memory and to print the report.

    The goal is to punch in the values of control-> Run the VI-> > print the report and the report is complete with all the values in that control.

    Now a bit about the VI:

    Control values, that I don't speak are simple string as the name of the company controls, operator name and al.

    The block diagram composed of (LEFT to RIGHT):

    Consumer & producer loops--> Type in front of panel controls--> print the report.

    In other words, loops of producer/consumer of output data in the toolkit of generation report. But the Front panel to be fed contols lie between producer/consumer loops and report printing function. (No express used screws)

    So, how can I get rid of my front panel endangered control values. I want to display when the VI is running.

    Please advice.

    Thanks in advance,

    RP.


  • Open the Panel before Subvi in the executable

    Hello

    In my labview project the MainVI contains about 20 subVIs. My goal is that by clicking on a button on the Panel before the main VI I would open a special Subvi (assuming it to be sub - VI, 10). To do this in the labview development environment, I used a reference of openVI with its path of entry is the name of the VI vi I want to throw (Subvi 10), and then set a real constant on the front panel to bring up the control panel front of the Subvi. This works well in the labview development environment, but when I create an executable file I'm not able to open my Subvi. I looked around, on the knowledge base and found this article.

    http://digital.ni.com/public.nsf/allkb/24F54CF34391074D862570E6005857DE. But this talk article to launch the front each time the Subvi is called. This does not work in my case, because sometimes the user may not want to launch the Subvi. I also have a lot of controls and indicators on the Subvi, so there is no way I can get that on the main VI as she would not clutter on the main VI.

    In the property settings for the building of the executable under the category of settings of the Source file, I see the option Panel before removing the dependencies, but it does not set the option for the Subvi individually. Only together, I can remove the front panel for all content items.  If no help on how to solve this problem is greatly appreciated.

    Have you tried to use static references VI instead of using 'VI open' with a file path?  With a static reference VI, the compiler has a better idea on what you are trying to accomplish during the execution.

    I did it in before executables without any problem.  Personally, I like having a Boolean input of the Subvi, called "Display window" (or something like that) and then have the Subvi manage how it wants to open (or close) front panel.

    It has more than this past... the code snippet a little caught of freedoms.

    It is within the Subvi (which my main VI is still running).  The Subvi has a static reference to himself.  I have a button on the front of my VI main panel when you press on sends a 'true' to Boolean entry "display window.  The Subvi responds by opening the front panel upward. The opposite happens when the button is pressed.

    This code was compiled in many executables and works without any problem.

    Edit: Image cropped.  This Boolean coming is "First Call".  The function retrieves LV 2009 done this 'error 2' terminal.  Laughing out loud.  I wouldn't name which.

  • I can't get rid of Highlightly even though I disabled in the extensions and uninstalled in the control panel. (windows 7 pro)

    Highlightly does not appear in the control panel more since I uninstalled it. I disabled the extension in the Add-ons. He however keeps popping up. I have windows 7 pro 64-bit.

    Is there an action actually uninstall Highlightly your list of extensions instead of disable?

    One thing I would recommend is that make you a Reset of Firefox. The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    To be sure that he's gone completely, make a check of malware with some malicious programs, analysis of the programs on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Why have I not 2 15.0.0 and 15.0.1 Firefox versions in my Control Panel Window Vista x 86?

    I noticed that I have 2 different versions of Firefox 15.0.0 and 15.0.1 in my control panel in Windows Vista. Before doing anything, I need to know why I have Firefox 2 in my system and how it happened. It is safe for me uninstall older versions? If so, how? I am a beginner, not expert in computer science.

    Thank you
    Sue

    I have now changed my original message.

    There is no need to take action in such cases. The installation process went wrong, and it's a known issue. You will not have two installed copies. The problem is that the registry entries are misleading because of a bug.

    The installation process is changed to correct this problem and prevent it from happening in the future.

    I took the liberty of this post as a marking. (I will add information to related positions later, it's my lunch break, if no one else does everything first)

  • Envy 15: Loss of Beats Audio control panel after Windows 10 last updated

    Hello

    Does anyone know if the Panel Audio Beats will be available again?

    After the last update to Win 10 I lost the control panel and also my Bass speaker didn't work on the external speakers. Finally I sorted out the problem of speaker by selecting another driver in Device Manager.

    The most recent update to Win 10 was 1607.

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

    When the reinstallation of Chipset has completed, restart the laptop.

    When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • HP 15 laptop: DTS Audio Control Panel is not open

    Control Panel audio dts is not open I try several times. OS-Windows 7 64 bit {OEM} model name HP r006tu.

    Hello

    Try the following.

    Download the Realtek Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69611.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69575.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Start, then laptop and when Windows is loaded, open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

    Let windows take over completely for a few minutes before checking if the DTS control panel will now open Ok.

    Kind regards

    DP - K

  • Satellite U400 - cannot find ATI Control Panel & issue FN

    I can always find the sofware ATI graphic control panel where I can change the settings.
    I remember I had this software installed, but I think I uninstalled and now I don't know how to get it back, because I want to have more color in my laptop.
    Someone knows how to change?

    And when I doubleclick on Intel Graphic Media Accelerator Driver for Mobile: I can't find the DEMO.
    I only find 3D and Calendar Option settings, but not VIDEO-settings :(
    Everyone please?

    Also when I click on F6 or used before F9 appears diffrient manny option on the screen of the laptop it's settings, software, choice of but now when I click nothing happends don't. Button control SOFTWARE or what I may need to do this also?

    Thanks for all the help.

    Good bye

    Hi mate

    I think you mixed with something.
    To be honest I m a bit confused.

    Initially, you asked for the ATI graphics and then you said that you have Intel Graphic Media Accelerator Driver for Mobile installed on your laptop.

    Please my friend, don t mix different graphics cards!
    Your laptop seems to be equipped with the Intel graphics card and therefore you cannot use the ATI graphics!

    I have a U400 too and I've got the Intel GPU too.
    Intel Graphic Media Accelerator Driver for Mobile, I can change the settings of gamma, brightness and contrast. That's all what you can change!

    Regarding your key issue FN;
    I think that you need to reinstall the driver or a tool.
    See the page of European driver of Toshiba for a compatible software.
    I put t know what OS you use, but if you use XP, you must reinstall the common modules. If Vista is preinstalled, reinstall the package of value added

    Good bye

  • Java pane in the control panel

    I did not know I have the java Control Panel on my mac how can I remove it. It was not there before.

    Mike h.

    Why do you want to remove? Are you talking about the Java Control Panel in the system preferences?

  • PID control Windows THIS Labview application

    Hello

    I want to build an application that will control the temperature in ovens, using the PID command. The application will run in a controller (or a computer touch panel) with windows CE OS. I have Labview 8.6, the PID control 8.6 toolkit and Touch panel 8.6 module. The problem is that the vi PID does not seem to work on the touch panel module.

    Is it possible to implement the PID control in a Labview windows CE application?

    Thanks in advance.

    I think that with a timed loop you can run a reasonable opportunity to 1 mSecond. I think 1 mSecond is the lower limit for the real-time systems like Windows/windows CE. And if you have the PID toolkit that will provide you with the features you need. You need not additional tools kit this PID. This because the touch panel module run under your standard Labview environment. But I don't know if the functions of the tool of PID like fuzzy logic are compatible with THIS. Have you also thought Windows Embedded as an operating system for your module. With windows Embedded, you can run standard Labview built of exe files

    Both Windows Embedded XP Embedded can be dragged

    http://www.Microsoft.com/windowsembedded/en-us/products/westandard/default.mspx

  • I can't open my control panel Audio DTS

    I upgraded my pc to win 8.1.

    Sweet OS, but not the interm of the drivers...

    before I wasn't able to make adjustments in my control panel Audio DTS

    so I have seachered for an answer and there was a similar to him, he said to uninstall and reinstall the sound drivers.

    As said, I did.

    After the restart I tried to open the Audio Panel. It has not happened... tried to look for it online for installation or the software update, has not quite everything.

    Please help me with this.

    I tried to troubleshoot issues in windows and he showed a pilot unknown/material:

    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00\4 & 1937D2A1 & 0 & 01E0

    don't know if that's the problem...

    HP Pavilion 15-e015tx (E3B55PA) PC notebook

    Nevermind guys, HP support Assistant gave me an update and its working fine now

  • How to: using the same control panel for several vi and reproducing change to the control panel.

    I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

    All controls in the control panel are in a bundle, so all values are passed to 1 thread.

    I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

    I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

    Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

    Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

    Have fun

    Ben

  • ICAN can't uninstall Justcloud. I tried Control Panel, add/remove, but he did not remove it. What can I do?

    Very well... I downloaded Justcloud but failed to read the terms and policies. I want either, so I tried to uninstall it by going into the control panel and clicking Add/Remove, but Justcloud would not uninstall. I'm a novice at this and I don't really know what to do to get this from my computer. It's the first day of a 14-day free-trial which Justcloud offered. I really need this uninstalled before the end of this trial period because I do not share the terms and policy and I will not be forced.

    [Moved from comments]

    Hi Shawn,

    System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

    Do a System Restore to an earlier date and check if it works.

    System restore

    What is system restore? (Vista)  

    How to restore Windows XP to a previous state

    Good day!

    Answer please if you have any questions.

  • Cannot uninstall/remove permersoft driver from Control Panel.

    Original pilot program title: permersoft

    I am struggling to find a way to remove a driver Permersoft scanner program that focused - it does not appear in all programs, so it cannot be deleted in the usual way. It sarts to the top every time I turn on. I'd really apreciate so much simple instructions to get rid of it-thank you.

    Hello

    1. What is the version of the operating system installed on your computer?

    2 have you made changes on the computer before this problem?

    If you are unable to uninstall programs of the control panel please fallow the steps below to uninstall to fix.

    a. to do this run the FixIt tool from the following links.

    b. click on the link below and select run now button.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    c. After you download and run for the first time

    d. Select run on window smallpop and select run on Internet Explorer-security warning window.

    e. Select detect problems and allow me to select patches to apply.

    f. Select UN-installing.

    g. after the audit select the option that you need to uninstall, and then click Next to uninstall.

    I suggest also to delete startup permersoft, point and check.

    If you use Windows Vista or Windows 7, click the Start button, click all programs, right-click on the Startup folder and click Open or Explorer.

    I hope that the above information is useful!

Maybe you are looking for