2 different questions HPDM

Similar Questions

• Different questions about Satellite L450D.

  Hello

  I bought this phone a few months ago and im in big trouble!
  First of all, my first problem is that when I tried to activate my mcafee trial he said he had expired even though I only started the laptop! But this problem does not matter anyway as I had more problems.
  Finally in any way since occasionally my laptop seems sort of crash and freeze etil will say windows Explorer is not responding so then I have to restart the laptop and then something comes to the top of the windows saying check the "consistency" and she often does! whatever the problem, I do not know and also incase you think its virus or spyware or something like that, is not! because I had Norton 2010 on my laptop, and then deleted norton and tried AVG and still nothing was found. I also did a scan with malwarebytes and nothing was found!

  Now, as of today, I got another problem.
  I booted up the laptop and it says that windows was not genuine, when it is clearly authentic because it has been purchased by Argos and I even went in System Accessories, and he says it's activated and authentic but I was receiving messages saying that it was not authentic!

  Since I've had this laptop I've had problems with him and im starting to think it's bad because I deleted everything out before because the system was not going to go right so I used the data used in the D drive.
  Even when I did a clean install it always gives me problems! I think it's a guy from the fault, what can I do?

  I brought to Argos and they kept during the night, but nothing happened I could have guessed! and they don't give me a replacement or refund because only they see there is no problem with the laptop when there is clearly because I had problems! Now it is under standard toshiba warrienty so what I have to do?

  Thanks please reply!

  Ryan.

  Post edited by: PauPau

  Hello

  To be honest, it is not easy to say what to do in this situation.
  When you have several different problems with the laptop, it is always best idea to reinstall the OS and test it with the factory settings. OK you've done, but I don't know how you did that. Maybe you started to install favorite software and all of a sudden he started again and again.

  This activation with McAfee is already reported in this forum, but of course, there must be a problem with the connection to the server from McAfee. If this has nothing to do with Toshiba. In my opinion, you must remove McAfee immediately after clean operating system installation. I recommend you to use http://www.free-av.com/
  It's free and excellent antivirus that uses less system resources and run extremely stable. I use it for years.

  These freezing issues can be the result of many different things and it is not easy to say why this is happening.
  # Enter the BIOS and set it to default settings
  # Try please install new OS by using recovery image.
  # Remove McAfee and install Avira Antivirus
  # Remove Tempro system
  # Use own OS preinstalled for day or two to see if all of these questions will happen again

  Let us know if all these issues bad happen.

  BTW: what model of laptop do you have exactly?

• slightly different question on the Terminal Services

  Under Vista with SP2 from Vista, is the service Terminal Services are disabled by default?

  Hello CompWorry,

  I answered your other question.
  But to answer this question, by default in Windows Vista, Termainl Services startup type must be set to manual.
  There are no other services that depend on the Terminal Server Services to start.

  Your startup type may have been changed by a tech, but I really would not be able to determine.
  By default, services Terminal Server listens on port 3389. However, it can be changed through the registry to listen on a different port.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Different questions on Satellite M40-185RU

  Ah, Yes, g ' Day.

  I started having quite some problems recently with my M40-185RU. Initially, it came with a Russian version of windows because it was bought to the Kazakhstan, but which was replaced when I bought it with a licensed English version and then resettled drivers. Now he worked happily for the past 18 months, but recently more and more functions have stopped working, I sort of blamed various updates from Microsoft. I thought I'd try and reinstall all the drivers in the recommended order, then updates and see if that fixes the problem, but it didn't.

  I had problems are, except different drivers eager to download and install in Russia, because I'm in the Kazakhstan:
  (1), the infrared port no longer works, but I found download quickfix for this - he has yet to set it. In addition, the driver downloaded only in Russian. (trying to download off UK site).
  (2) dial-up modem has just stopped working and I get an error code 633, although no settings have been changed for my modem. I tried to reinstall the updated modem software, but it still does not work.
  (3) battery Bluetooth drivers download only in Russian. (trying to download off UK site).
  (4) Soundmax drivers download only in Russian (trying to download off UK site).
  (5) wireless LAN drivers wanted only to download in Russian, so I don't mind updating them.
  (6) Nokia PC Suite does not connect with a USB bluetooth, infrared or even wired blimen. I reinstalled several times, restarted etc etc, but not joy.
  (7) CD/DVD-rom will be is no longer burn CD or even dvd in Nero, or even the simple "drag & drop" feature of Windows Explorer.

  several other pilots also would only download as well in Russian, but as they were not so important I jumped them.

  So I guess what I'm really after is if anyone has any ideas on how I can resolve my other notebook. While I wish that everything was fixed 1,2,6 & 7 are the most important for me.

  TIA everyone.

  Keiran

  Well, I managed to get the modem working again but uninstall the modem, uninstalling the nokia PC suite software, reboot, then reinstall the modem software. Message Error 633 so luckily no more on this one.

• Different questions about Satellite L855

  Dear community of Toshiba...

  I bought a Toshiba laptop as for my study Mediadevelopment a year and half ago. I got Toshiba Satellite L855 edition.

  When I received my order, I was very happy with it and I knew that I would succeed on this nice unit programming.

  After 3 weeks of use, I already had a scratch right next to the camera. And I must admit I really handled the phone with care. I ordered a case of neck and he had with me in a laptop bag. Even when the lid is closed there is small scratches around my laptop and it started to worry about what would happen.

  While watching an episode of the game of Thrones. I noticed a red dot... just in the middle of the screen. And I don't want to be arrogant, but I have to say that it's not cool when you already have a failure of pixel using a laptop as about 1 month.

  I received an update of a driver of my DVD player tray. And toshiba TEMPRO told me there was a BLUERAY drive in my notebook... but this was not true... Just another point that disappointed me.

  I ordered an upgrade for Windows 8... So I was able to develop applications for Windows 8. It's a very nice OS BUT I can't use my brightness buttons yet more... The display goes just in black, and aint there is no way to fix it, but to restart my computer and that is very annoying when you are programming.

  The fan on my AMD card also gets really hot while doing nothing. I know how to check if there are a lot of processes running, but it heats up by simple same process (it's even my glass cool soda Cook until temperature hot lol!)

  And now also the reason why I ask for your support here, when I close the lid of my laptop. It closes smoothly... There is a crackling sound and the back cover looks like it rises while I close the lid.

  Now after all I lost a little hope in my notebook. And I repeat, that I really handled it with care... I don't even dare to walk with her while she is closed in my hand. But those things so much that makes me sad. Just because of I still need to study 3 years more and had to pay a lot of money for this... I'm sad that sooner or later things will just get worse...

  I therefore ask you guys, you people don't know what I can do?

  Kind regards

  PS: Sorry for my English!
  Jay

  Hi Jay

  In general the notebooks are not so sensitive devices so I put t know how all this can happen, I mean with scratches and clicking noise. It is logical that laptop may not always be as good as new.
  I handle my books carefully, too, but they are not in perfect condition more.
  Cooling fan: try to reduce the activity of fan cooling cooling method to change option.
  Control Panel > power options > change the power plan settings > power plan advanced options > Toshiba power Saver saver > cooling method change for optimized battery
  This should reduce the activity of fan cooling.

  > Then I ask you guys, people you know what I can do?
  It is not easy to give you the correct answer to this question. What you can try is to contact Toshiba service and ask for a tip. They should have experience with this, and they are in constant contact with Toshiba, so they should have enough information about the situation.

  By the way: several people have reported on this message Tempro. You should not be disappointed on this matter. It is an automatic procedure and such errors may occur.

• "Check video cable" message on HP 2311 x (different question than the original post from jca93)

  Hello

  The State monitoring displays:

  --

  STATUS MONITORING

  DVI: No Signal
  HDMI: No Signal
  VGA: assets

  Auto-Switch Source: Off

  By default the Source: VGA

  Recommended settings: 1920 x 1080 at 60 Hz

  --

  I only have the VGA cables, so I don't use DVI or HDMI to connect the monitor to the computer. I was configuring the display on the screen (OSD) when I accidentally went in Source code control Options and change the video source to VGA to HDMI (or DVI, that it is placed directly above VGA).

  By default, auto - switch should be on, but I turned it off a month before. Computer is not affected, control only. I tried Access Source Control Options, but the OSD appears.

  My question is: is it possible to fix this error without buying the other 2 types of cables? Is it possible to open the OSD menu?

  Help with an HP Expert or community will be much appreciated. If you give me more information, I'll be happy to comply.

  Please try to perform a hard reset on your monitor 2311 x;

  1. disconnect the power cord from the monitor.

  2. hold power for 30 seconds.

  3. reconnect the power cord pc.

  This should clear up your video present source question and your question OSD back to factory settings.

  Please send Bravo

• GTA IV is impossible to install! two different questions!

  were already 'installed' game but does not start.

  so I click on the CD and it begins to start. Then a white pop up screen says "Grand theft auto IV is put in place.

  "Welcome to the grand theft auto iv installation process. Grand theft auto iv pc requires installation of the software, including social club of rockstar games, sony DADC SecuRom, adobe flash, microsoft .NET framework, games for windows live, internet explore and direct x. To play GTA IV online, you needand account with all two windows live and social club of rockstar games. to review the software requirements and information, please visit www.rockstargames.com/support
  * bottom of pop-up (two buttons)
  1 Social Club.) launch
  (exit 2).
  I click on launch social club
  3 things can happen
  1.) nothing
  (2.) it brings me to a black pop up screen that looks like the screen prompt command followed by an error message "error ws10 fatal."
  3.), it brings me to the social club where I can press play but nothing happens.
  I need a walkthrough COMPLETE including the resettlement of the disc. (no steam)
  Thank you and I hope that I have been descriptive enough

  Yes, GTA4 was the worst conglomerate of DRM never, until that time.
  -You need not log in to the Social Club. I'm not positive, but I don't think that it is still running.
  -You want to patch the game, but I do not remember how, so check with the forums
  specific to GTA4 to see if you should go beyond say patch 1.5.
  -The 1.5 patch, I thought was supposed to remove Social Club, but I still have the pop-up window
  before I tell him to go away.
  -The game also needs a fix for GFWL.  I think remember me stuffing things GFWL upward and obtaining of
  the fix is fairly common. GTA4 modding sites have a fix called xliveless.dll for this.

  -If you have a graphics card with / 3GB (maybe 2 GB) or more of RAM you must also create a file to force
  the game to accept this time has evolved and is more than 1 GB VRAM on video cards
  possible. It is a command line text and it goes like this.
  Open Notepad and type (or copy and paste) the following-
  (adjust the first two native resolution on your monitor if you want).

  -width 1920
  -height 1080
  -nomemrestrict
  -norestrictions
  availablevidmem - 6.0

  -Save as commandline.txt and place it in the main installation directory of games with the GTA4.exe.
  You may not need the trouble resolution with the command "nomemrestrict", but that the...

  If you are installing somewhere other than the default location - Program Files (x 86) - it can help.
  It is generally more beneficial to avoid permissions issues, but it can sometimes help with
  other questions.
  Another partition or a drive HARD is good, but a new folder in C:\ with your games installed in their own
  subfolders is OK too.

  Specific GTA4 forums can produce more suggestions.

  .

• A few different questions with Satellite A80 116

  Hello

  I'm having strange problems with my recently bought A80 - 116. I bought this computer in Germany a month ago, and problems seem to be showed up quickly after I received it.
  1. when the computer begins to start suddenly just for some reason, the hard drive light flashes and in light of the end, just burn for a long time. The system also is not responding to Ctrl-Alt-Delete. Then I push the power button for a long time, turn off the system. After this system tries to start almost in the same way, but Toshiba welcome screen disappeared and then spring Marvell Yukon bios messages that say that certain errors occur, and I need to check the cable.
  2. when I turned off quick boot in the BIOS, messages about control memory appeared, and stopped just before messages about hard drive found. Message on the hard drive is sometimes present, after starting this system.
  Often, this problem appeared when recharging from a State of hibernation system.
  3. the system often does not recharge after sleep. It seems that the system is hang-ups or blue screen.

  My suggestions were that the problem may be in the old BIOS 1.50, but I upgraded to 1.70 and steel of problem persists.
  Another suggestion is that some problems may be in drive hard or network card.
  I'm waiting for practical assistance.

  Thank you
  SergK.

  Hi Sergey

  I think you have a problem with your hard drive and you should contact the service.

  The errors you get from Marvell Yukon - which is the network card - is just the information that the PC has attempted to boot from LAN, but he can't do it because maybe the most basic check - the one that a netcable is connected - failed. Don't think too much about now because it is not very related to your problem more that it shows that the PC has try devices more bootable can indicate hard disk problems.

  I spend more time trying to locate the problem, everything you describe was told there is an intermittent problem with the hard drive.

  Good luck

  Tom

• Different questions about Satellite T130

  Hi all - firstly, newbie alert. Just signed up. First post. Be nice...

  Bought a T130 off eBay. Worked fine at first with the General navigation & stuff.
  One day tried to open the Userguide PDF & everything started to go VERY slowly.
  Finally, he opened. Smelt a rat. Start Adobe reader on it of own - VERY slow. I think that corrupted drive.

  Try to uninstall - this is not okay.
  All ice - popup eventaully saying "management console has stopped working" (or similar). Now, I'm worried.

  A lot of disk activity - disk is maybe bad, maybe fragemented.
  I defrag - it's nice. I have run chkdsk - it is slow, but ends (fixed a few things - probably because I had to power supply without stopping).

  At one point, he wouldn't even boot & requires a stop. I think I'm fried, but when I turn it on to start ok... WTF?

  I found a few other posts & Google suggesting corruption OS searches, & it looks like the deal for me.

  But it is a laptop - I have no Windows 7 install media.
  There is no installation of recovery partition (that I can see). So, how to reinstall the OS?

  Hope someone can help me here.
  My first experience with Toshiba laptops was not nice...

  Thank you
  Steve

  Hello

  I think the system is corrupt and the operating system must be installed again. (as suggested by your own).
  You didn t get the recovery disks because there was an option that allows you to create a clean recovery disk!
  Try to start the new laptop and check if the Toshiba recovery disc creator is installed and that you would be able to create a recovery disk.

  If this is not possible, then you will need to order a drive recovery right here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Different questions on the new Satellite C855-2GX

  After buying Toshiba Satellite C855-2GX is really not worth everything $ pass on it that's the problem that I still meet the pc's NEW!
  For Specifcation: HARD drive of 500GB, 8 GB RAM Intel I5
  -Mouse Lag during the Anti-Virus Scan or install a heavy or even when the pc of the defragmentation program.
  -PC really even slow its i5...
  -When the battery is 10% sleep mode dosen't work WHAT? my pc on himself...
  Is there a solution? don't tell me to him MAKING the PC IS NEW...

  You have already started a thread on this topic (touchpad gal while doing something)
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=73816

  Follow the first thread to avoid misunderstandings!

• Number of different questions with Equium A60

  reinstalled windows and is not install these audio and video controller controller, pci modem went sm bus controller, I have a toshiba EA60-155 someone can tell me what that what material is/where can I get the drivers of

  was soon paul

  Hello

  Why you didn t use the recovery CD?
  It's the easiest way to install the OS and it should works property because this CD has been very often in the trial.
  In my opinion, try to recover the operating system with the recovery cd.

  Good bye

• People are emailing me with the wrong answer to a different question

  First of all I already know and have tried to go into the menu programs to uninstall this little of the Essetials Microsoft I had (MAIL ONLY) but in this menu there is no trace of LIVE MAIL on my mail to unde C drive is listed as a file or a folder but if I try to remove it it says that I need a special Setup program

  If I try to do a clean install with firewalls, systems of told me that I have all the programs in Live Essentials installed except in parachute

  Now, I've learned that I'm missing a dll file that goes with MSN Wldcore.dll I downloaded this file twice since the announcement of two sites when I typed in the line after hitting the race he did not work, had a fight with my mother because she doesn't know that outlook express which she uses has not been done or offered that why my windows live was put out there for free

  Hello

  I suggest you for the link and check if that helps.

  http://answers.msn.com/thread.aspx?postid=c420840e-2162-42c0-b43e-bda653d3ddf1#'c420840e-2162-42 c 0-b43e-bda653d3ddf1'

  If the problem persists, contact MSN support for assistance on this issue.

  MSN support

  How to contact MSN customer service

  If the problem is specific to Windows Live Mail, I suggest you send the request in Windows Live Forums for assistance.

  http://answers.Microsoft.com/en-us/windowslive/forums

  Please post back with the results and we will be happy to help you further.

• Yet another (but hopefully different) question about hashCode()

  I hope you can bear with me here, because this issue is long enough.
  
  I was stuck with a problem for quite a while: how to determine a hash for a ratio has / b, involving BigIntegers (and therefore, potentially very large values for a and b ). I would also add that it is a problem of efficiency , not a general.
  
  Curiously, the comparison of the two reports is NOT a problem, as this can be done gradually and includes a few very quick due diligence; but hash - especially focused on the value of hash - a particular problem, since it is to calculate a value that must be equal to any value.
  
  Simplest is, of course, reduce the fraction, then calculate the hash, but I'd like to eliminate the step of reduction (which always implies division, even if the fraction cannot be reduced; and at least 2 if possible) if I can.
  
  If someone ate a pie of brain, I'd be very interested to know your thoughts, even if they are not complete solutions. What worries me here is that my math is simply not up to the problem.
  
  Winston
  
  Published by: YoungWinston on May 14, 2011 22:13

  jverd wrote:
  This will give zero in all cases when N< d.="" so="" at="" the="" very="" least,="" you'd="" have="" to="" test="" first,="" and="" flip="" to="" d.divide(n)="" in="" that="">

  I know.
  50% of the aura N/A Ratio = 0. Then, they will end up in the same compartment.
  But the method of random generation of correct Ratio? Or they must be distributed to the Pseudo-hasard between 0 and 2 ^ 2000?
  Your method strongly favours ratio between 0 and 1 and discriminates against the reports between, say, 25 and 26.

  Published by: baftos on May 14, 2011 22:36

• MY question is on October 22 How can I restore file "SndVol32.exe" once I have it?

  I really do this more difficult by asking a similar question to the one I asked 8 months ago. It's my fault, so I'll try again.
  I need to answer the question that I want or I'll get an answer to a different question. I tell my students
  "It's a very good answer, now you answer the question I asked?

  I need to * run the file "SndVOL32.exe".    I got the file I386 on my installation disc and am now in
  My Documents and a flash drive.

  I'll open this one up;  Can someone tell me what to do with the file?        Please don't tell me where I can get him!

  Glen A Jacquart * address email is removed from the privacy *.

  Hi glenjacquart,

  -What version of the operating system is installed on your computer?

  If you have Windows XP, I suggest you to consult the following link to restore the SndVOL32.exe file.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

• Classic deployment question 10.3.2 blackBerry

  I have a unlocked Blackberry Classic SQC100-4. I used it on AT & T GoPhone. Why the 10.3.2 is not available for my unlocked phone?

  You seem to think that all is lost? Official methods receive an update in no case are the only methods. Also, we cannot know that if your hypothesis is correct about ATTs controls on the implementation... only they can answer that question, of course. Finally, I feel obliged to provide a slight correction here:

  Val_Dallas wrote:

  BlackBerry does not support devices purchased from other online retailers.

  This raises different questions. I did the (incorrect) assumption earlier that you had purchased your device from ATT. One of the theories on the OS version control is that the carrier controls... but it's actually a bit generic. Each instrument is initially made for some channels and the carrier... If your device was not originally made for ATT but rather another carrier, then it is possible that it was this another carrier (whatever they may be, we have no way of knowing) who controls the release, even if you run on ATT.

  But, it's all theoretical and academic in any case... If the official methods do not provide the update, there is no way to force them to do so. But it remains informal methods... refer:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  And, since it is still updated to 10.3.2.2639, you can get this automatic charger here:

  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  So you see, all is not lost! As has always been with BB, skillful users have come up with methods to get around the controls that exist and allow other users get what they want.

  Good luck!