2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

Similar Questions

• Windows media player cannot play the file missing error codec.

  Original title: windows media player...

  .. Cannot read the file. The player might not support the file type or does not support the codec used to compress the file. How can this be repaired? Thank you!

  Hi miltonian,.

   

  Thanks for choosing Microsoft Community!

   

  You have reached the right forum. Let us work as a team and try to solve this problem.

   

  If I understand correctly, you are unable to read a file on Windows Media Player 12.

  Please answer these questions to better understand the issue:

  1. What is the file format of the file?

  2. is the specific question in a file?

  See the following articles and if that helps:

  Information on the types of media files that supports Windows Media Player:

  http://support.Microsoft.com/kb/316992

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Cannot find the shared library nilvaiu.dll and nican.dll.

  I'm using Labview 8.5.1 on windows XP 32-bit systems. Recently, I installed labview on a 64-bit XP system.  I feel what I think, problems of drivers on the 64-bit system, now. When executable files are run files are not: nilvaiu.dll and nican.dll.  Someone at - he lived these errors and now where to find the latest 64-bit drivers?

  Well, the list of drivers that are supported for XP 64-bit is quite short. And although NI-VISA, DAQmx and NI-CAN are not on this list, unfortunately.

• Expansion of the files is at 27% and then my screen turns off? : s

  Hi all, I read the other thread on this subject on the website, but as usual the problem I have is simply a little more boring, I would like to re-Morphix vista compeltely but in order to do so I obviously need to go through this process. As the title says, when he reached 27% on the expansion of the files after the first reboot, it goes no further, then after awhile my screen turns off. IM typing this text from my laptop at the moment in the hope that all of a sudden my screen will restart and it will continue, but I doubt it very much.

  I understand more information may be needed to help me then please just ask. Thank you.

  P.s. This problem during one accurs installation from the cd rather than boot. When I try to boot from the drive and runing installing it, my screen turns off agan normally just after entering the cdkey for vista.

  I have no idea why this is happening, but if I have the sort I would be very very happy :)

  EDIT: A little later and the screen is back on, sound saying "Please wait a moment while windows prepares to start for the first time" then after that, there are a lot of points and moe points keep coming (etc.) I hope it's a good thing: S

  Hello

  1. are you able to boot to the desktop now?
  2 How much RAM you have in your computer?

  If you are unable to boot to the desktop, then unplug all external devices and try to install windows again.

  If the installation fails again, then start in the system recovery options, and run the Windows memory diagnostic tool.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player won't let me rip a CD, the error message indicates that they cannot find the file

  Is watching the guys, I think not that this is a 7 days without some kind of sleep problem, but I can't work out why Windows Media Player 12 will not rip a CD I put it in, I get an error message saying that Windows Media Player cannot find the file I'm tearing and maybe it is moved renamed or deleated in the meantime that my CD is in the CD/DVD drive waiting to be fooled on my laptop Windows 7 64-bit. I ripped the CD loads before but I had to reinstall a complete a month ago, and this is the first time I tried to extract anything on my laptop. If anybodys got any ideas on how to solve this problem, my inner peace would be much more peaceful MCE! Cheers and Happy New Year to the United Kingdom, I wish you a good and peaceful 2014.  Rich.T

  Hi Rich!

  This might help: http://www.fixkb.com/2010/07/when-ripping-musing-with-media-player.html

  See you soon
  Julia

• Cannot open files dew files missing mf.dll

  I'm running windows xp for making movies and my CPU fried, so I paid for a computer windows 7, but it did not come with movie maker, windows MediaPlayer or photo viewer. is it possible that I can get these to work that they all have the same message cannot open the dew to the file missing mf.dll, please help :)

  You can copy the file from another PC own you (same "build" (32/64 bit)) or maybe a trusted PC and then copy it to your computer and then try to save it?

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Captivate 6 errors: Missing file libwinpthread - 1.dll and the Application could not start correctly (0xc000007b) under Windows 2008 R2

  Hello

  I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested it, but the result is the same.

  1. I used AMEE (Application Manager Enterprise 3.1) to create the installation of the deployment via SCCM 2012 Package.

  Note that the current package works fine on Windows 7 (x 86 and x 64), but not on 2008 R2 error after I tried to launch the Captivate.exe application.

  The error indicates that there is a missing file: libwinpthread - 1.dll and if I copy and made a recording of the present. DLL file then he sends another error saying: on-demand failed to start correctly (0xc000007b) so he won't ever let me launch the application.

  2 now, if I install the package directly from the Original sources (CD) without creating any package AMEE after completing the installation, I have always the same error about the missing DLL file.

  Is there a fix or workaround to install 6 Captivate on Win2008 R2?

  Thanks in advance and greetings.

  This seems to be a generic question unrelated to Captivate. Here is a site that lists the possible causes.

  How to fix Libwinpthread - 1.dll is missing / not found error

  I don't know if their solution works well.

  Anthony

• Cannot start the computer (error hal.dll)

  Hi, I use Windows xp and when it loads, it says:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll
  Please reinstall a copy of the top of the queue.

  I have the original Windows xp cd and when I boot from the cd the blue screen comes up saying "Windows Setup".
  It automatically start doing something and then he stuck to "ACPI Plug & Play bus driver. Stucks HE there for a while and when it ends, I got an error message that says: "file acpi.sys cause unexpected error (32768) to 5964 in d:\xpsprtm\base\boot\setup\setup.c line."

  And when I press any button it just restarts the computer and it makes a loop in this way.
  And by the way, safe mode and all the other modes do not work, I get the same error for hal.dll, and I can't reach the office.

  Help, please!

  UPDATE: this time I received the error "acpi.sys file caused...". "now, I got that it's corrupted.

  It is extremely unlikely that the hal.dll file is missing or damaged.

  It is extremely likely that XP just cannot find the file.

  I have no idea what you have tried so far things - have you tried to do a repair installation?

  For this error, I first start in the XP Recovery Console (by pressing 'R' of your bootable CD) and run chkdsk /r on your system and then see how things appear after that, but try this notice from the Support Engineer and see how it works.

  If you can't get into the Recovery Console any CD you or you are not sure what type of bootable media you have, you should make a bootable CD from the Console of the Recovery XP (no XP media required) and do not forget what you have.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  I recently noticed this error message-

  Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  whenever I try to click on a card game.  Help, please!  Is there something I can download again to fix this error?

  Hi jaymeister3580,

  It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Error: "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

  Original title: laptop won't read the music files stored on external hard drive

  I have an old Compaq laptop Windows XP, so it was out of memory I transferred everything on a Portable Seagate (500 GB) hard drive and started to access it. It's worked well for over a year, but lately, began to stop playing my music files. Absolutely everything on the hard drive opens, however, images, files and folders, but when I go into Windows Media Player, it pops up with this error message:

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.
  I have not modified parameters or anything that moved. I used to be just able to restart the laptop, or disconnect and reconnect the hard drive and it works again, but now it or not will be not at all, or it will cut off half way through a song and then not to play anything more.
  I can't find any support for this problem because the phone reads that the hard drive is there, and everything else works. Only the music doesn't. I tried to play music on a connected USB and it works fine. I'm so confused!
  Hi lkm0293,
   
  Here are some articles that you might find useful:

  Windows Media Player Error Message help

   

  Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."