2 MagSafe charger or Macbook Pro problem

Hello! I recently bought a Macbook Pro of the retina (at the beginning of 2015) here in Singapore, with the prepackaged MagSafe 2 charger with it. I always charge my computer while using it, and usually, my uses are extremely lightweight.

Well, here's the problem... Yesterday, when I was about to plug my charger to my Macbook, I realized that there are very obvious stains in the Macbook port itself. Look at the head of the charger, it is not even and seems to have slightly burnt and melted.

I am still able to load and use my computer very well, but I fear that if this continues, this degrades quickly in the fire. My sister advised me to swap the Macbook Pro itself for a new one, which I suppose is possible through discoloration, but despite everything, is the Macbook Pro the problem? Reading the various forums online suggests that this is the problem with the MagSafe 2 magazine.

Please share some thoughts, thank you!

"Recently" may be in a period of Exchange or not.  Whatever it is, you have at least a 1 year warranty (AppleCare that extends to 3) and you must use to find the answer before it becomes more than a gene and damage the MBP.

Tags: Notebooks

Similar Questions

  • Charger for MacBook Pro 13 inch, late 2011

    What charger for MacBook Pro (13 '' end 2011) since the megasafe 60w charger is no longer available?

    Thank you very much for the help.

    According to find the right power adapter and cable for your laptop Mac - Apple Support end 2011 MacBook Pro 13 "uses the following http://www.apple.com/shop/product/MC461LL/A/apple-60w-magsafe-power-adapter-for-macbook-and-13-inch-macbook-pro?fnode=8b which shows it as being available (at least in the United States).

    If this is not available, note that you can use an adapter of higher power such as mentioned in the following extract from the first link above:

    Adaptors for Apple laptops are available in 29W, 45W, 60W and 85W varieties. You must use the adapter appropriate for your Apple laptop power supply. You can use a power adapter higher compatible without problem, but it will not collect your computer faster or work differently. Lower power adapters do not provide enough power.

  • Battery in MacBook Pro problems

    Old 15.4 inch MacBook Pro works for a long time with the AC adapter. I recently bought a new battery. First of all, it was green and orange flashing and sometimes say "battery not charging" but finally 100%.

    MacBook, firm but both down with battery drive. It works as usual when it is connected to the power adapter. I have reset the Pram and SMC without effect. Any advice?

    Try to run the Apple Hardware Test (use the #2 installation disk that has the AHT instructions written on this subject).  It may provide a clue.

    Note that an error free AHT is inconclusive.

    Have you tried another charger or tried your charger on another Mac?

    Ciao.

  • Trackpad and keyboard Macbook Pro problem

    Hello

    It's been a few months that I have a problem with my Macbook Pro, indeed the trackpad doesn't work at all and the well-tempered clavier from time to time (duty to restart).

    MacBook Pro (retina, 13 inches, end of 2013)

    OS X El Captain version 10.11.5

    I saw that Apple had released a patch pour these problems: this update is recommended pour MacBook Pro (retina, 13 inches, end 2013) models. It solves a problem of non-response of the keyboard and the trackpad multi-touch integrated.

    But I can't install the update because it is no longer supported...

    Do you have a solution?

    Many thanks,

    Kind regards

    Hello. This article can help you If your Apple wireless mouse, keyboard or trackpad is not working as expected - Apple Support

  • Fuzzy screen of retina MacBook Pro problem

    Hello

    My MacBook Pro (retina, mid-2012) recently had this issue on the screen:

    Searched the Internet for similar cases, I think that this problem with the anti glare coating will get compensation as stated on https://www.apple.com/support/macbookpro-videoissues/

    But when I bring my Macbook to the Apple authorized service provider in my area, they said I have to wait this blurred more and more problem to be replaced. Can I help for this to feel really annoying because they appear to the center of the screen?

    There is a test VST of pass/fail for the problem that is described in the link you posted.  This test has been run?  If so, what were the results?  If the test was not performed, it should be.

    Ciao.

  • MacBook pro problem KB

    Hi all

    I've updated to El Capitan, one a few months ago and since then whenever I have "long press" a character on my KB for more options of different languages, KB freezes.

    I can not type anything more until a few minutes.

    But if I ' press and hold ' even once, it freezes again.

    Someone had the same problem?

    Any fix for it?

    Thank you

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Activation on MacBook Pro problems

    Hi, first time I encountered this problem, and it's really confusing.

    (1) new Macbook Pro - model 2014 Mid - i7 2.8 Ghz processor with 16 GB of RAM

    (2) application of CC Office

    (3) signed to up and download the Photoshop application

    (4) installation complete

    (5) clicks PS app to open it... get the Validation screen whirly wheel... and the message to subscription "now active creative cloud. Click on continue to use your product. »

    Screen Shot 2.png

    6) press continue button to continue...

    (7) I then get a window of the SUBSCRIPTION EXPIRES arise and to contact my administrator to renew etc...

    Screen Shot 1.jpg

    (8) I press that button try AGAIN and he return to step 5 and so on...

    I contacted Adobe support and talk to a charming gentleman for an hour. Connected to my machine. The Lightroom Develop module was also not working, so first question. It has disconnected my CC account on my mac remotely and using its own connection to Adobe, open applications and the Lightroom Develop module was opened to use. He checked with accounting my account is clear and paid without any problems in the past 2 years of membership of the CC. Then it disconnected her account on my machine and put on my own sign in ID... I put the password... and module DEVELOPMENT closed again...

    I have a computer based on windows in the studio, which has no problems with Lightrroom/Photoshop or bridge and is on the same ID.
    MacBook is the main computer and a problem because it does not always work.

    I even deleted the partition on the MBP disk and formatted the drive, reinstalled the OS X Yosemite and begun the process from the beginning and still the same.

    I don't have time to devote to a phone tech support to the United Kingdom for a week or two, and its problems causing with workflow I need PS to work in order to edit the pages of Wedding Albums.

    HELP HELP HELP!

    My subscription is very well... I sent the message to Atul above as

    Tried the solutions contained in the link and no work. Sign says me that CC is now enabled on my user ID... will validate then said I don't have a membership of cloud... I do... you took another payment today on my card!

  • spinning wheel on MacBook Pro problems

    Hello. I have a brand new MacBook Pro 13 "(model 2015) Retina display and I have been doing the spinning wheel of color when running games, which causes to freeze and I have to force leave them, also appears when in Safari when doing the research.  Why is - what happens to a new laptop?  I: 2.7 GHz intel core i5, graphics card intel iris 6100.

    Even if your Mac is again check to see if there is an OS X update available.

    Open the App Store then select updates from the menu.

    Latest version of OS X for a new Mac is 10.11.6.

    Maybe it's why you see the beach of rotation ball.

  • SSD Macbook Pro problem

    Hello.

    Recently, I made the purchase of a Samsung SSD 850 evo and installed according to the advice of own Samsung (https://www.youtube.com/watch?v=mihb8YQzDxw & list = LL3FXtTPsf_dcteBdBwPvH4g & index = 1). "Could not unmount volume" or trying to clone the HD, "the source disk is only reading / writing.

    Overall, I had a lot of difficulty in the exercise of reading from the SSD and always failed in installing Mac OS X.

    Should what procedure I follow?

    My Macbook Pro is the beginning of the model 2011 13'

    Thank you.

    I don't know what you were doing or how you did it in your question. I suggest you check if you can perform a recovery network: computers, which can be upgraded to use OS X Internet Recovery. Then proceed as follows:

    Clean Install of El Capitan on a new disc

    1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
    2. The Utility Menu appears in 5 to 20 minutes. Be patient.
    3. Select disk utility, then click on the continue button.
    4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
    5. Click the Partition tab in the main window of disk utility. A panel will fall.
    6. Set the GUID partition scheme.
    7. Define the type of Format Mac OS extended (journaled).
    8. Click on the apply button, then click the fact when it is active.
    9. Quit disk utility and re-enter the Utility Menu.
    10. Select reinstall OS X and click on the continue button.

    [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

    This should install it El Capitan for you on the SSD. You can transfer your files from your backup.

  • Willingness to charge your macbook pro when sound already hurt the battery to 100%?

    MacBook Pro 13 inch with 128 GB OS X Yosemite 10.10.5 retina

    NO.

  • CS6 installation with the new MacBook Pro problem

    I just got a new MacBook Pro. It is currently running 10.9.1

    I have installed my software CS6. Other programs seem well but AE does not open and gives a message of error-10810

    Any advise?

    Stan

    Have you installed the 11.0.4 update?

    http://www.Adobe.com/support/downloads/product.jsp?product=13&platform=Macintosh

    http://helpx.Adobe.com/after-effects/KB/effects-launch-Mac-OS-109.html

  • "This connection is Untrusted" appears when you try to access all sites on MacBook Pro; problem started after running Avast scan of the computer

    I ran the full scan of the disc of Avast. Since then, I have been unable to access any site using Firefox without getting the message, "this connection is not approved." Many are the sites I have been too many times before, and they are trusted sites. I don't know if there is a problem with Firefox or Firefox could recover place a sort of new "infestation". The Avast scan resulted in 5 put files in a quarantine area. Eleven years could not be scanned. Thanks for any help you can provide!

    I guess Safari normally works on these sites?

    The latest version of avast! Web Shield includes a function to filter your Internet connections for potential threats. In order to filter secure sites, it must present a certificate of 'false' for the site in Firefox, so it can be 'in the middle' and read your secure communications. If Firefox is not set false certificates of trust, then you will get warnings for all secure sites.

    You can disable this feature as a test to see if the problem goes away.

    If this works, but you want to use the feature, you must import the certificate of Avast in the tab "References" of Firefox so Firefox accepts its false certificates (there might be an automated way AVAST to do this for you, or you might need export from IE and then import them into Firefox).

    Here is an exchange of views on avast! "forum of s on the way in which this is supposed to work: problems and questions about HTTPS scanning - Avast Internet 2015

  • MacBook pro problems

    OK people here's my dilemma, above you see an error that occurs when I try to start the MacBook I was good

    by a friend and now I guess I know why... This error occurred when I used a bootable yosemite 10.10 Passport external

    the car that I did on my most recent powerbook. If anyone can shed some light on this issue and or can point me in the right

    direction I would trully are appreciate for that.

    You can start the volumes that are on the system drive? The panic only occurs when you attempt to start the external hard disk?

  • What's wrong with my Macbook Pro battery?

    So this is sort of related to the question I asked yesterday

    Do not charge the MacBook Pro battery

    But fundamentally there is no light on my charger and the battery bar was at 2% for a whole day saying is "do not load" I have even if it is turned off and disconnected last night and it didn't lose charge. It is under the battery bar

    What could be going on with her? Battery health status shows 'Normal' and 'Remaining Charge (mAh)' keep ranging from 85 to 87 and he is down to 75 last night and now it is back to 85. I get a new charger because the one I have is a no knockoff Apple and I think he could have done something to my Macbook, but there is a problem with the battery itself too?

    When you get a real Apple charger that works, then you can start the battery, if problem if it does not work properly. In the meantime, it would be useless to pursue this avenue.

    Ciao.

  • I can feed my Macbook Pro 2011 usb port

    Is it possible to power (charge) my MacBook Pro 2011 USB port?  I had the case where I forgot my card (or used my MacBook more than expected) and he should be charged.  Since normally the USB provides power, I didn't connect it to a power outlet (via adapter).

    I am running OSX El Capitan.

    Thank you

    N ° USB came out only one power supply.

    Ciao.

Maybe you are looking for

  • Dial the notifier in file lives

    Hi all. I use the notifier for forward my datas. I have create a notifier in main.vi and I want to call my values in sub.vit As an attachment, you can see my operation basically. Why can't my values come into my sub.vit files? Thank you.

  • old games - back/win95

    Compatabiliity will not work with old games.  specifically, I can't the Black Dahlia, Sanitarium games and the Cameron files to work.  These last two will install even.  Black Dahlia moved but after, game and freeze the controls.  haven't tried to fi

  • Cannot add files/folders to the Media Player library

    Hello.  New user of Windows Media Player (WMP) here.  Using Vista business so I think I have Media Player 11. I have MP3 (converted M4a format) files on an external hard drive.  WMP will play them very well, but I can't seem to add them to the "libra

  • How to change the text in the cell

    Hi experts,How to search - replace text only in the cell?How to make this script work?varmFCarray =]["2030", "2031"],["2029", "2030"],["2028", "2029"],["2027", "2028"],["2026", "2027"],["2025", "2026"],["2024", "2025"],["2023", "2024"],["2022", "2023

  • Personalized product

    HelloI'm interested to know if it is possible to customize a product.If a customer wanted to buy a product (say a tshirt) and then after choosing what size they wanted... they could then choose to have their name printed on the back of the shirt. I w