2 microphones. Buffer overflow.
I get an error of buffer overflow while acquiring data from 2 microphones.
I am sampling at 22050 s/s with 5000 S/c.
Less than a second, I get the error,
"Error 4823 is produced in .vi Sound Input read (DBL)-> New.vi.
Possible reasons:
LabVIEW: (Hex 0x12D7) you can't perform this operation without an active task. To ensure that a task is active and try again. Enter a task might stop running if the capacity of the input buffer overruns. Overflow occurs when data are not read quickly enough. »
Is there something I can do to fix this? I tried to play with the values of s/s and S/ch, but could not solve the problem. I think this will become a big problem when I try more of 2 microphones. I searched online for a solution to this problem, but could not find something that worked for me.
Thank you very much. Examples or suggestions are greatly appreciated.
Tags: NI Software
Similar Questions
-
Is there a way of 'ignore' the buffer overflow error and leave the buffer to be overwritten without having to close and the process of acquisition and retune the radio report?
I know that the first question is: "are you * sure * you do not want to do? '... But yes, I'm sure!
---
Brandon
Hey Brandon,.
I'm glad you asked on this subject! We have just posted our latest driver OR USRP, version 1.3. You can download it here:
http://www.NI.com/download/NI-USRP-1.3/4711/en/
One of the features of this driver is a new node property that allows you to cost overruns and overflows as warnings rather than errors. "You can find the Configuration property' advanced search ' WARNING policy. Then, you can wire the constant return warnings:
Please note, after updating your driver, you must also update the FW and FPGA on your USRP image.
-
Input buffer overflow Agilent 34970 has
IM using Agilent 34970 A for a blood pressure purpose, Im getting error 521 and 103 when I select more than 15 channels.
I understand that 521 error is an input buffer overflow error. IM using one of my own live measurements.
I measured the 40 channels at once and I never had an error, but when I use the VI attached the error im.
I reference some of the threads that deal with the same problem, I have not found a solution.
Thank you
Eureka
Thanks for the reply... I thought about it... had to set the unit in XON/XOFF mode so that it retains the values of the power input channels. I did notice that I made the changes in the configuration, while I was doing someother changes...
@margasan,
The post that you directed me was one of my own messages... but thanks anyway...
Thank you
Eureka
-
Serial port receive buffer overflow error
I am trying to send a file to a folder in my computer to another folder in the computer using conncections tcpip as part of me learning labview. But I get an error
Possible reasons:
LabVIEW: Serial Port receive buffer overflow.
=========================
LabVIEW: The network connection was refused by the server.I don't know how to fix this. So please help me. I have attached the VI here. Thanking you,
You read just 1 character of the file. With your read file, on behalf of the value-1 to read the entire file.
In addition, for writing file, there is a Boolean input on top for 'Prepend/string Size array. The value FALSE or you will get some additional data at the beginning of your file you want.
-
SE Buffer Overflow prevented notification and "Windows Explorer has stopped working"
Dell Inspiron 1501 with Windows Vista Home Edition SP2 using base. Receive notification of the 'Buffer Overflow prevented' McAfee antivirus program caused by progran Wndows Explorer.exe. also get notification "Windows Explorer has stopped working", then after a while "Windows Explorer restarted". I don't know why this is happening. Help, please.
Hello
See the following article:
Note: Before installing, be sure to cook the data.
Error: Windows Explorer has stopped working:
http://support.Microsoft.com/kb/2694911
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Difficulty of vista of buffer overflow
I need a simple way of difficulty bluestack unable to start error vista and also buffer overflow error
You are in the wrong forum. This forum is for the Vista installation. Please use the link 'Contact us' to http://bluestacks.com/ for kkkkk. It is a beta product and the responsibility of the developer.
-
Hello... I hope someone can help me! I just turned on my computer and when I try to open Internet Explorer, I get a message from my McAfee SecurityCenter, saying "Buffer Overflow blocked" with a yellow exclamation point. He then said:
McAfee has automatically blocked a buffer overflow.
On this buffer overflow
File: C:\Program may Explorer\iexplore.exe
Buffer overflows can cacuse legitimate programs to fail. Other programs that are the buffer overflows, however, can be used to damage your computer, compromising safety and damage important files.
He asked me then either:
Confidence in the future to this activity
Close this alertSo I can't get Internet Explorer to work. I get the same alert. I did some reading and saw that the overflow is an attack, and I hope the McAfee caught, but how to stop this buffer overflow so that I can get my computer working again? I am writing from another computer, since I can't get the internet right now.
Thank you
ND21215Hi, ND,
on the Helper.dll malicious DLL, see: http://www.greatis.com/appdata/d/h/helper.dll.htm.
You are infected with the Infostealer.Banker.D Trojan.Try to use as SUPERAntispyware (freeware) and Ad-Aware (freeware).
When everything has failed, HijackThis v2.0.2 (http://aumha.org/downloads/hijackthis.exe) is the tool to use (in conjunction with other utilities). HijackThis will NOT fix anything on its own, but it will help you to identify and remove any hijackware / spyware with the help of an expert.
Download: http://aumha.org/downloads/hijackthis.exe
Post your log in:
http://spywarehammer.com/simplemachinesforum/index.php?board=10.0,
http://forums.spybot.info/forumdisplay.php?f=22,
http://aumha.net/viewforum.php?f=30,
or other competent body for review by an expert in the field.If you need help with virus-related issues, contact the Support Services Microsoft product.
To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).
For support outside the United States and the Canada, visit the page Web of Product Support Services. Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/
-
Now PATCHED: Player QuickTime Streaming Debug Error Logging buffer overflow
The following was copied/pasted from http://secunia.com/advisories/40729/
Description
Krystian Kloskowski has found out a [critical] vulnerability in QuickTime Player, which can be exploited by malicious people to compromise a user's system.The vulnerability is due to an error of border in QuickTimeStreaming.qtx during the construction of a string to write to a debug log file. This can be exploited to cause a stack-based buffer overflow for example tricking a user in the display of a malicious web page that references a file SMIL containing a URL that is too long.
A successful exploitation allows execution of arbitrary code.
The vulnerability is confirmed in version 7.6.6 (1671) for Windows. Other versions may also be affected.
[NO] Solution
A hotfix or an update is not currently available.EDIT: Due to this vulnerability in QuickTime, Secunia reports now all my browswers (IE, FF, Opera) as being insecure.
QuickTime 7.6. 7 was released http://www.apple.com/quicktime/download/ ;
and Secunia PSI removed this vulnerability to his list of (In) Secure Browsing.
-
Windows Image Helper (buffer overflow vulnerability)
My security software reported up to 'Kingsoft Writer contains a buffer overflow vulnerability'. Y at - it a patch from Microsoft to fix this problem?
Hello
Please go to the Microsoft Community Forums.
What security software is installed on the computer?
If security software is causing the problem, I suggest you to contact the manufacturer of the application for assistance.
Thank you.
-
ORA-20000: ORU-10027: buffer overflow, of 1000000 bytes
Hi all
on 11.2.0.4 on Win 2008,.
for only 3 rows
I get
ORA-20000: ORU-10027: buffer overflow, of 1000000 bytes
When executing:
exec dbms_output.enable (10000000);
declare
cursor c is
Select name, LES_PETITS of)
SELECT name, count (*) AS LES_PETITS of members, e loans
where e.CREELE > add_months (sysdate,-10)
and e.MEMBRE = members. NUMBER
Group name, COUNT (*) ASC agenda e.MEMBRE)
where rownum < 4.
MyName MEMBERS. NOM% TYPE;
mycnt number (3);
BEGIN
OPEN C;
LOOP
extract the c in MyName, mycnt;
DBMS_OUTPUT. Put_line (' == > ' | MyName |) ' ' ||
mycnt);
END LOOP;
END;
/
As you can see that 3 lines should:
SQL > select name, LES_PETITS)
2. Select name, count (*) AS LES_PETITS of members, e loans
3 where e.CREELE > add_months (sysdate,-10)
4 and e.MEMBRE = members. NUMBER
Group 5 in order of name, COUNT (*) CSA e.MEMBRE)
6 where rownum < 4.
NAME LES_PETITS
--------------- ----------
LOMOBO 1
1 INGRAND
ANN 2
I don't want to run DBMS_OUTPUT. ACTIVATE (buffer_size = > NULL); because it will never stopping and server hungs up
Thanks for help.
The loop is never - ending that's the problem.
Why do you use PL/SQL at all here?
-
On the HDR-XD550 buffer overflow error
I had my handycam for over a year and only used a few times. We took it to the Disnyland and we got the video and great photos so she went in a padded case and was not again for 6-7 months. In the middle of registering my program of school kids that I have received a "buffer overflow" message and recording stopped. I was not able to record more than a few minutes since then. I read about this problem on several websites with the same model correct. Of course, Sony wants me to pay hundreds of dollars to watch because it is just over a year. Technical support even says she has heard of this problem with the other appellants, but Sony will not determine whether a recall. I spent a lot of money on what was supposed to be a quality product, and if it was because of something I did, I have to pay for the repairs, but many, many, many others have the same problem.
Hello and welcome to the Discussion Forum for the users.
I'm sorry you have a problem with "buffer overflow" appear on the LCD screen and the recording stops automatically. I couldn't find the model HDR-XD550 in our knowledge base, but I assume you have a model of Digital Camcorder HDR-XR550 hard drive. The "buffer overflow" error may occur when the camcorder detects the shock of the continuous noise or whipped milks, and internal protection system is activated to stop the recording on the hard disk. When recording in an environment that has continuous sound hard or milk whipped, as in a concert hall live or on a bike, please keep the camcorder from the source noise or shake as much as possible.
-
Hi all
Version of DB :-10.1.0.5.0
I have the package that is used for sending email when the report is finished. It worked very well in the test environment, but in production, he sent emails and hit. When the journal it shows the stamp on the error of flow.
So let me removal of "DBMS_OUTPUT.put_line (' mail sent to ' |)» curr_email. EMAIL_USER_EMAIL_ID); "would be the fix for this. If not any suggestions please.ERROR at line 1: ORA-20000: ORU-10027: buffer overflow, limit of 2000 bytes ORA-06512: at "SYS.DBMS_OUTPUT", line 35 ORA-06512: at "SYS.DBMS_OUTPUT", line 161 ORA-06512: at "SYS.DBMS_OUTPUT", line 123 Below is code ************* PROCEDURE PROC_STATUS IS K_BOUNDARY CONSTANT VARCHAR2(1000) := 'a1b2c3d4e3f2g1'; l_report VARCHAR2(32767); --empty_clob; --clob := l_header VARCHAR2(1000); l_footer VARCHAR2(200); cnxn UTL_SMTP.connection; cursor cloc is select location_id from loc order by location_id asc; loc_id cloc%rowtype; BEGIN FOR loc_id in cloc loop l_analysis_report := '<style type="text/css"> <!--.style1 { font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 10pt; font-style: normal; color: #FF0000}--> <!--.sidebar1 { font-family: Arial, Helvetica, sans-serif; font-size: 10px}--> <!--.text { font-family: Arial, Helvetica, sans-serif; font-size: 12px}--> </style> <center><b><font face="Arial">Summary Report' || TO_CHAR(SYSDATE, 'DD-MON-YYYY HH:MI AM') || '<br><br></font></b></center>' || ' <div align="center"><table width="95%" border="1" cellspacing="0" cellpadding="1" </div>' || '<span style="font-size: 10pt; font-family: Arial"> </span> ' || '<tr bgcolor=b4b4b4><td align="center"> <font size="3"> <b>' || 'Report</b></td><td align="center"><font size="3"> <b>' || 'Start Time</b></td><td align="center"><font size="3"> <b>' || 'End Time</b></td><td align="center"><font size="3"> <b>' || 'Run Duration (mins)</b></td><td align="center"><font size="3"> <b>' || 'Status</b></font></td></tr> ' || UTL_TCP.CRLF; FOR curr_refresh IN (SELECT AN.ID,AN.NAME ,TO_CHAR(ARH.RUN_START_TIME,'DD/MM/YYYY HH:MI:SS') START_TIME, TO_CHAR(ARH.RUN_END_TIME,'DD/MM/YYYY HH:MI:SS')END_TIME, ROUND(((ARH.RUN_END_TIME-ARH.RUN_START_TIME)*24*60),2) RUN_TIME_SECS,ARH.JOB_STATUS STATUS FROM....... so & so) LOOP l_report := l_report ||'<tr><td align="center">'|| curr_refresh.name || '</td><td align="center">' || curr_refresh.start_time || '</td><td align="center">' || curr_refresh.end_time || '</td><td align="center">'|| curr_refresh.RUN_TIME_SECS || '</td><td align="center">'|| curr_refresh.status || '</td> </tr>' || UTL_TCP.CRLF; exit when length (l_report) > 32500; END LOOP; l_report := l_report || '</table><br><br>'; l_footer := UTL_TCP.CRLF ||'<b> Note: This is an auto generated email. Please do not reply to it. Contact the IT team for any further information.</b>'|| UTL_TCP.CRLF; FOR curr_email IN (SELECT GLOBAL_NAME INSTANCE_NAME, EU.EMAIL_USER_LAST_NAME last_name, EU.EMAIL_USER_FIRST_NAME ACNAME, EU.EMAIL_USER_EMAIL_ID ....... so & so) LOOP cnxn := UTL_SMTP.open_connection('smtprelay.XXXXX.com', 25); UTL_SMTP.helo(cnxn, 'smtprelay.XXXXX.com'); UTL_SMTP.mail(cnxn, '[email protected]'); UTL_SMTP.rcpt(cnxn, curr_email.EMAIL_USER_EMAIL_ID); l_header := 'MIME-Version: 1.0'||' To: ' || curr_email.last_name || ' <' || curr_email.EMAIL_USER_EMAIL_ID || '> From: ' || curr_email.mail_from || ' Subject: Status Report for ' || curr_email.XXXXX || ' on ' || to_char(sysdate, 'DD-MON-YYYY') || ' Reply-To: [email protected] Content-Type: text/html;' || UTL_TCP.CRLF || UTL_TCP.CRLF; UTL_SMTP.data(cnxn, l_header || l_report || l_footer); UTL_SMTP.quit(cnxn); DBMS_OUTPUT.put_line('mail sent to ' || curr_email.EMAIL_USER_EMAIL_ID); END LOOP; END LOOP; END PROC_STATUS;
Kind regards
SunnyThis is the procedure of package as you can see, then add it after
BEGIN
Or you can add this command before call you the procedure.
In my view, the use of the output for the large amount of logging information is not good idea.
-
Acquisition of NOR-6602 delay and buffer overflow
Hello world
I use an NI PCI-6602 to record photon arrival times. Basically, it counts the number of rising edges on the sample clock 80 MHz which occur between two rising
edges on the photon TTL signal. The array of integers can be converted at a time by multiplying by 12.5ns. Please find my VI for the task and its attached Subvi.I have two problems:
(1) I want to do this same measure for two photon detector channels. I've set up two independent channels. My goal is to correlate the signals with a gap between them. I am able to implement a delay in the software, but my data there seems to be a small inherent delay between the start of each channel.
The amount of the delay is seemingly random and occurs in the positive and negative direction. In VI I joined, I tried to use the start of arms in order to get both channels to start acquiring at the same time, but this reduces the severity of the delay, it has not removed completely. There is always a delay of 1 to 500 microseconds. I have implemented the trigger arm to start properly, or there at - it another way to solve this?(2) I get an error message indicating that "the data has been overwritten before it can be read by the system. The number of samples that have been collected before this error varies and also varies between the counters on the Board. I had a theory that the transfer of sample rate was not good enough, but according to the manual, the transfer rate should be approximately 2000kS/s. It is more than enough as the photon count rate is less than 50 k/s. The PC that I use has a PCI graphics card too. Is it possible that is to limit the frequency of sampling? Here are the specs of PC: processor Intel Pentium D (3.0 GHz), 2 GB of RAM, nVidia GeForce 7300 graphics THE.
Thanks in advance.
Hi James,
I think you might be interchanging the words "metering" and "sampling".
The counting begins with the relaxation of beginning of arm, which should be at the same time for both channels (with perhaps a shift of 1 tick, who would be 12.5 ns on the 6602). Count refers to increment the register of account of material at each tick of the input terminal (80 MHz base time in your case).
Sampling of the account register will take place at different times on each dependent channel when the photons are detected. So the temporal measures on each channel will be different, but if a photon should occur on each channel at the exact time you would get an identical timestamp on each channel for a sample. Sampling refers to the value of the register count in a buffer you can lock read later in the software.
This image (from theM-series user manual actually, but the 6602 should work the same way) watch your use case:
The time that the meter is armed is identical between the chains, so each counter at some point value would be equal. The time sample clock are not identical on each channel, so locked into the buffer values don't would not the same.
Using the same external signal to sample some registers simultaneously count shows that relaxation of arm early works (in other words, if you give the same sample clock counters, you get the same results). If the beginning of the arms did not work, you will see different results on each counter even with a same sample clock (the sample clock not to arm the meter). Out the relaxation of beginning of arm would confirm this point - arm tasks in the software (which is what happens with no beginning configured trigger arm) will give unpredictable delay between each task starts - you will see a difference between the channels, even with a sample clock shared.
Looks like the problem is that you could have if wait photons occur on the two separate channels at most close at the same time? You can try out photon detector to confirm whether or not there is a current backlog of the scope. Looks like it is - but this isn't what you're trying to measure? Expect photons to be detected by each channel exactly at the same time?
Best regards
-
I'm using LabView 2010 and everytime I go to collect data using my VI, after a few minutes of data, I get a buffer overrun indicating error, and stops data acquisition.
How can I get to stop this?
Also, my VI is configured to 10 samples per second and an average of these output 10... then I need 10 averages per minute. It does not appear to be part correctly. Can someone tell me how to fix it?
Start by getting rid of all xvis I think I showed that this code serves no useful purpose. Do not. Replace them with all the functions, just throw the blue icons. CTRL Space ctrl r. gone poof. The rest will work out pretty easy once these pigs is no longer slow down useful processes.
-
Microsoft Visual C++ Runtime Library: Buffer overflow
Hi, recently I met problems with call of duty 1 when executing it. Whenever I double click CoDSP.exe this error message appears:
"Microsoft Visual C++ Runtime Library
Buffer overrun detected!
Program:... .gram Files\Activision\Call of duty 1\CoDSP.exe
A buffer overrun has been detected which has damaged the program's internal state. The program cannot continue safe execution and must now end. »I played it years while I had another computer and Windows XP Proffesional(SP 2).
I tried to use avast! Internet Security to check the virus and CCleaner to check the registry errors... nothing worked. So if there is a solution help me.Specifications: operating system: MS Windows 7 Enterprise 32-bit
CPU: Intel Core 2 Duo E8400 @ 3 .00GHz
DDR2 Dual-Chanel RAM: 4.0 GB @ 399 MHz(5-5-5-18)
Motherboard: ASUSTeK Computer Inc. P5Q (LGA 775)
Graphics card: ATI Radeon 4800 Series
HARD drive: 625 GB Western DigitalThe problem is due to a bug in the ATI drivers - there are several threads about this on the website of AMD. The thread I've read has been closed by a moderator with the statement "it will be fixed soon. I use the 10,11 drivers on a 4870 and I have the problem too.
10,12 drivers are available but that thread seems to indicate that the problem was always present in people. The message from the moderator was published on 12/19/2010 so I hope that the next version of driver will fix it.
http://forums.AMD.com/game/messageview.cfm?CATID=227&ThreadId=134238&startpage=3&FTVAR_FORUMVIEWTMP=linear
Maybe you are looking for
-
Satellite L70-B-12 t - BSOD, atikmpag.sys everything at stake
Whenever I try to play a game amd driver crashes or I get bsoded (atikmpag.sys).Some days he arrives just after I start the laptop and other computer after several hours of use or one or two hours of play. I tried everything on x 64 (OEM) home win8 a
-
Hello! My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx. I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). Wha
-
Original title: Virus Scan failed Cannot download anything with IE8 or Chrome. Constantly get "Virus Scan impossible" or "" *. "" * "contained a virus and was deleted. » Changed the setting to the "browser.download.manager.scanWhenDone" in Firefox t
-
BlackBerry smartphones, I can't install BB Maps
Hello I had a problem with function GPS from Google maps and read somewhere that I had to re - install BB maps in order to operate. I took BB Maps to my phone (and Google maps) and tried to re - install BB Maps on the site (and the method of e-mail).
-
Need help to paste in Photoshop
When I copy a picture and paste in Photoshop, how do I change settings so the new page opens according to the size of the copied image and DPI?