2 problems with my TECRA M2

Similar Questions

• Problem with my Tecra M3

  Hello world

  I hope someone could help me. I tried to reinstall my computer by booting with the CD of data. The Windows installation was fine until he asked me to release the CD and restart.
  Once restarted, a blue screen appears saying it should be a problem with a virus or a pilot. I thought that the problem comes from the HARD drive while I gave to a specialist whose formatted and verified. No problem occurred. So I tried to reinstall.
  The same problem with the same screen appeared again.

  What is the problem? Should I have to change the BIOS?

  Help, please!

  Thanks in advance

  David

  Hello

  What cell phone do you have?

  What operating system do you use?

  Why reformat you the laptop if the technician set and the operating system installed?

• Some problems with cloning Tecra M10

  Hello

  I created an Image of the Tecra M10 and cloned it with Ghost8.2.

  Then I tried to clone it to other M10 who has worked the most but mashine 2 or 3, I get an error "unable to read from the HARD drive please restart."
  Does anyone have an idea what?

  Greetz

  Hello

  I think the problem is the HARD drive where the image is stored because the GET error Impossible to * reading * from the HARD drive please restart.
  Then you should check the HARD disk where is the image is stored. I looked, and a good program for it's Drive Fitness Test.

  Good luck and post your result.

  Welcome them

• Problems with keys Tecra S1

  Hi all

  Have a Tecra S1 (model pt831e) - PM 1.7 ghz, XP Pro, 512ram that when you press the Enter key it product symbol # (in notepad, word, outlook etc.). everyone comes through this?

  THX

  If this happens just with the internal keyboard to some malfunctions. You can try to remove enter and keys # and check if the contact is dirty. You can try to clean it. Otherwise, you must remove the keyboard.

• Power On problems with Tecra M11 - 10Z

  We have problems with our Tecras.
  When they are used in the field, the problem is the same on 75 machines and they cannot be turned on at all.

  It is sometimes useful to remove the battery, sometimes it it dosent and the laptop cannot turn on the next two days, and then it works well again until it does it again...

  How can it be, its starting to be a very big problem...

  We have tried to turn off the TPM and they perform the update to the newest bios, they are all running windows 7 pro 32-bit...

  I hope this is enough information because my English is not that great, and I hope that someone has solved this problem...

  Hello

  I noticed that the new BIOS has been released for the Tecra M11 series.
  Try to update the BIOS and check if it could enhance the functionality of s for laptop.

  Good luck

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• problems with tecra A2

  My tecra a2 crashes sometimes. The screen turns blue, and he said "beginning dump of physical memory. There is no consistency in what I do when this happens. The last time it was because I opened a pdf attachment, the time from before when I was using msn. Last time that the message was: problem caused by: ialmrnt5.
  All drivers are uppgraded.
  I also have some problems with the screen. Both when running on batteries and adapter. The screen seems to "blink" (black towers) for about a half second. This happens fairly regularly and independent of this program that I use.

  When I turn on the computer again everything seems to work normally, but it's really annoying.

  The computer was bought in August, and had this problem all along.

  I am grateful to all those who have comments or suggestions as to what is causing the problem.

  OK, that first of all, the problem occurred while you were playing a game, it is very likely related to your video card.

  Visit the Web site of the manufacturer for a driver update. If that doesn't help, check your RAM.

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

• TECRA A10 - 11 M - problem with TOSHIBA accessibility

  Hello to the forum.
  I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
  I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
  Here I have faced a problem with my buttons of accessibility. My function keys do not work!
  The message is: this system cannot be used "TOSHIBA accessibility.
  I uninstalled and installed again the feature, but nothing happened.
  Y at - it a program known that affect my system and prohibits any accessibility to work properly?
  Can anyone help with this?

  Thank you in advance,
  Vassilis

  _ @ dvass66_
  The FN keys need to installation of common Modules and Hotkey utilities for display devices.
  Common modules must be installed first!
  Also I recommend the update to the BIOS too

  _@korenisko_
  > I think that problem on this laptop is Wifi Atheros card
  I put t know why you think this, but I put agree t
  I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
  Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

• Tecra S2: Problems with Linux Live CD after upgrading the BIOS

  Hi all

  A few moments ago I flashed the BIOS on my Tecra S2. Now, my current BIOS version is 2.80. Unfortunately no, I had problems with booting of Linux Live CD like Knoppix or Kanotix. The freezing of the startup process, when the PCMCIA module is tried bo be started.
  What I want to do now is to downgrade my version of BIOS. Is anyone know how it works, and someone has an older version of BIOS of 2005? I couldn't find any older versions on the Toshiba support sites.

  Thanks for all replies!

  Biberkopf

  You re right. On the Toshiba page you will find only the latest version of the BIOS and the older versions are not available on the page.
  In my opinion if you want to downgrade the BIOS question using the service provider authorized in your country.

  But have you checked this site useful:
  http://newsletter.toshiba-tro.de/main/

  There you can get help with installing box machine
  It provides some useful advice to the configuration of the device

• Tecra M7: Problem with graphics.

  I have a problem recently with my Tecra M7.

  I have unwanted points and lines on the screen and also sometimes the screen is blank or vision pauses for several seconds.
  After my experience with desktop computers, I thought it should be the GPU, but I have no idea how Nvidia NVS Quattro works.

  I recently installed a new Windows XP Tablet to check if a problem with the software, I have also installed the latest gpu drivers of the site so I don't know that this is not a software problem.

  This may happen the other thing that GPU? Is it possible to replace the GPU if there a problem?
  I bought my laptop on Nov 2006, so almost 2 years, how many years is the warranty period for the gpu to the United Kingdom?

  Thanks in advance.

  Hello

  Connect the external monitor to your laptop and see if the problem still occurs. If Yes, I'm afraid there is problem with the graphics card. Unfortunately the graphics card can be exchanged separately. The entire motherboard must be exchanged.

  There is no warranty period for each component material, but for the laptop as a product. It depends on the country of purchase. Try to check the warranty on http://gedb.toshiba.com/

  Good bye

• Tecra M5 Sysprep problem with file hdaudbus.sys

  We have a syspreped image, that was created on a Toshiba Tecra M2.

  Our current image works on the following model of machines: -.

  Toshiba Portege 4000
  Toshiba Portge 4010
  Toshiba Portege M100
  Toshiba Portege R100

  Toshiba Tecra M2
  Toshiba Tecra S1

  Toshiba Satellite Pro 6000
  Toshiba Satellite Pro 6100
  ----------------------------------------------------------------------------------

  We should now get the image while you work with the new Toshiba Tecra M5.

  The driver that I have a problem with is HDAUDBUS.sys

  When the machine starts first, and almost before it even tries to build some itsself, it says it cannot find the file 'hdaudbus.sys' and it seems that it is in the D: research, if you navigate to system32\drivers, then the driver is installed correctly, but I can't seem to automate this process.

  I copied all required driver files and inf.
  I filled the sysprep.inf (under the heading "OemPNPDriversPath") file with the driver and the correct path. It made no difference. I also 'DriversSigningPolicy' value 'IGNORE '.
  I have sysprep using the image - pnp, mini installation then close it carefully.

  The question is:-

  (A) I do something wrong, and is there a good way to get windows/sysprep automatically install this driver?

  (B) I have a fix for the problem above, is:--
  Put our sysprep would be the image on the Tecra M5, manually installed ALL of the correct drivers and then re-Sysprep image. The question is, is it OK to do this? (It seems to work)? Or is it not advisable to sysprep image, several times, on different model machines?

  Any advice would be appreciated!

  Thank you

  Hello Mark

  Your ad is very interesting, but I don't really know which should help you. As you can see that he is user in the forum and you'll be lucky if anyone can tell you anything about your problem.

  This file is Microsoft one and try to check in a Microsoft support page, if there is solution available.

  In any case good luck!

• Problem connecting wireless with my Tecra A8

  Hello

  I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
  I tried several ways to solve this problem.
  I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
  Or I restart my computer, but it doesn't connect.
  However, it connects to the network wireless in anytime after about 15 minutes.

  Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
  I wonder that there is no problem with installation? Or my wireless card doesn't work?
  Can someone help me?

  Thank you

  > Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.

  According to the statement, all looks like that you try to use a password for encryption wrong!

• Problems with LAN RJ45 Ethernet on Tecra A8 PTA83E link

  I experienced some problems with the onboard Intel PRO/1000 PL Ethernet adapter. The adapter in most cases works very well: it connects normally in 100 or 1000Mbps - full duplex - speed, depends on wich internetworking devices connected and the link has any problems.

  But, in some cases, with multiple Eth, the adapter devices involved the link at all, the Green LED on the right (link?) continually flashes with a delay of 2 seconds (0.5 "-1.5" wide) and the yellow on the left (traffic?) is always idle. On the other side of the Cat5e cable, the unit (now a Linksys WAG325N router) sign no link. There is NO cable problem.

  Windows (XP Pro, SP2) sometimes reports in the small icon of the LAN adapter on the traybar a driver connection established at different speeds (often 100 Mbit/s, but sometimes 1000Mbps!), but soon he returned to status "cable disconnected".

  I tried to upgrade the drivers directly from the pages of Support Intel because the support of Toshiba does not recognize my laptop (!), and because originally I did a downgrade to XP (I'm sorry, but I don't want to use the original MS Vista!), but nothing changes.

  The only way to establish a connection that I found is to manually reduce the speed (10 Mbps - full duplex) of XP driver advanced settings link. In this case, everything works, but a low speed.

  Can someone help me? Someone already noticed this problem?
  Thank you!
  Paolo

  Hello

  I m not very good if it isn't a cable delivers.
  Have you tried to connect the two devices using a crossover cable (cross cable)

  There are three different types of crosscable:
  -100BASE-TX-Ethernet 10BASE-T-und
  -100BASE-T4-Ethernet
  -Ethernet 1000BASE-T

  The difference is the use of pairs of crossed wires.

  However, the use of crossed cables is not necessary if you connect a router or switch device.
  But in case you want to connect two laptops, the crossover cable is required.