2 questions - 1 - display a graphic and 1 - print

Hello

Have 8 of Adobe Standard on Win XP and I have 2 problems. Received a PDF and a graph (diagram) is not displayed on the screen. It print. I've updated the video driver, but has not made any change in the display.  The second question may or may not be related, is that when printing the left quarter of the page is out of the page. The page size of the document is 11 x 17 and I select to fit the printable area, to 8 1/2 x 11 landscape. the page is up and down but that is long left right. Opened and printed the document very well on another computer with Acrobat 8 Standard.

Thanks in advance.

Not sure about printing. To display the question go to preferences > Page display and turn on
'Display large images '.

Tags: Acrobat

Similar Questions

  • My screen is randomly display distorted graphics and then freeze it or restart itself?

    The problem seems to occur randomly, sometimes, the computer may be for a few hours before that happens, sometimes within a few minutes. So far, it just happened so I was browsing the web using IE (although I could not test at length to make sure that it is the only time where what happens).

    The screen will deform with horizontal blue lines and fixes other random colors. After a few minutes, the screen returns to normal, but the computer froze and is inadmissible. Twice so far (but), the system restarts and gives the screen "windows did not shut down correctly.

    So far the problem did not appear in safe mode. The event viewer displays all errors happening at the time that the problem occurs. I suspect, it may be a problem with the graphics card, but have no idea how I would be able to test this without buying a new and replace it.

    Anyone has ideas or offer any help?

    Thank you

    Thank you for your help. I managed to remove the monitor, which leaves the cable or the graphics card. Might be time for the repair shop, I think! 9 s

  • iAuthor question for iBooks text size and PDF print

    I get confused messages. It seems that my default iAuthor text 18 Baskerville - is the best font size to prepare my manuscript? It looks great. Average size printed book is 10-12 points. I also intend to use PDF files to make a 100 printed copies. If I stick with 18 p can I completely reformat the book for this version?

    Just export a copy of your book in PDF and see if you like it or not.

    iBA is not really intended for the production of printed books, so you should check that the PDF files that you get from it are not suitable for this.  Normally, for printing, use an app like Pages designed for that.

  • Firefox stopped play videos on some web sites and displays all graphics on the other. Have you Windows error msgs before videos stopped.

    A few times I got messages Windows error on a problem with Firefox and security, but I don't remember the exact wording of the error message or of what Windows disabled.

    Now on some news sites, I can't play videos, it is happening now on YouTube where I get an error message when I try to play a video.

    I also have problems on the site of the major League Baseball with the browser displaying some graphics.

    I restarted Firefox several times and even restarted my computer, but this has not solved the problem.

    Any ideas as to what went wrong or how to force Windows appears the error message again?

    Hello rsmith2000, this is probably a problem with the latest version of the flash plugin - for common solutions to this problem, refer to that 11.3 Flash does not load video in Firefox

  • The Task Manager does not display the process and tabs, even if the menu can be seen.

    Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.

    Here is a link that you can see a screenshot on my problem.

    http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG

    Thanks in advance for your help

    Original title: Task Manager problem

    I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
    Deleted it and the work of all the graphical interfaces as it should.

    Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.

    Kind regards
    Laszlo

  • Apex graphics and IFRAME:

    Hello

    Apex Version: 4.2.2.00.11

    DB: Oracle 11g Enterprise Edition R 11.2.0.3.0

    Listener of the apex: 2.x

    I got an obligation to create a simple dashboard with graphs and reports in the dashboard page. The page will have several charts and reports. As a result, in, click on the links in the table or the State, we need to dig other graphics / reports. For example if we have a chart for sales by year, click on a year, he must navigate to another "Monthly sales" chart for that year.

    To achieve this, we decided to create charts on individual pages and the dashboard page will have areas which the content will be rendered in an IFRAME, so that each table is then rendered in those iframes. Regions with iframes works well, , however we have a strange question that not all graphs are displayed in iframes. It restores a single chart, and for the other graphics it displays the message "no data found". Its also strange randomly displays the chart. Sometimes, it displays the first and no data message to the rest of the cards, once, paragraph2 poster, but not all the. Could not get all the information of the apex of the debug messages also.

    I experienced this in apex.oracle.com in the same way, here it works. Created two regions whose content will be generated thro a link in an iframe.

    https://Apex.Oracle.com/pls/Apex/f?p=58473:4

    Work space: experiment

    username: USABI

    password: USABIchart14

    Can we have an idea where the problem is?

    You help will be very appreciated.

    Natarajan

    I could solve the problem. The Iframes used different session for the URL, so the question ID. Changed to use the same session ID, now it works well.

    (BTW, a way to give points for my own solution)?

    Kind regards

    Natarajan

  • Switchable Graphics and ATI Graphics Driver disappear (BIOS update)

    Then the other day, that HP has insisted on the behaviour of one of its annoying BIOS updates on my Pavilion dv7.

    Before the update, I was able switchable graphics and could pass the ATI Mobility Radeon 4250 something the 5650 (I'm sure I have these numbers). in any case, now, a few days after the update (which I believe I installed on 19 January), I noticed that my switchable graphics options have disappeared, as well as my option driver ATI Mobility Radeon 5650... large. So now games graphics look significantly bad and slow because I can't spend to the best driver. Thanks, HP.

    So, the question is how to get back my switchable graphics and other driver? I was looking around and found some - related posts that can be useful for people who seek to answer this question, but aren't really help me:

    http://h30434.www3.HP.com/T5/display-and-video/lost-switchable-graphics/TD-p/389783

    and

    http://Forum.NotebookReview.com/Lenovo-IBM/392522-how-regain-switchable-graphics-W500.html

    If you answer this, please try to keep it in easy English and avoid a lot of abbreviations, I won't understand. Just consider me like a fool when it comes to installing and uninstalling the drivers and try to make simple instructions. Thank you very much!

    Hey man, idk if you are still working on it, but I have the solution.  Basically, HP has two updates for each laptop model; one for laptops with integrated graphics card only and another for laptops with switchable graphics.  Unfortunately, the driver for laptop with integrated graphics card only has been the default driver in this update.  Instead of trying to reinstall the older driver, just install the new correct driver.  To do this, follow these steps:

    1. go on http://welcome.hp.com/country/us/en/support.html

    2. the website can automatically detect what dv7 you have.  Just click on the button "start detection".  It will ask you to download something, but its ok.  Do it.  Then just click on 'continue' and let it detect your system.

    3. There should be a screen that has 'Detected list of products' on him.  Under where it is said that your model is, there must be a link that says "software and driver downloads".  Until it clicks.

    4. in the next screen, you will need to choose your operating system.  Select it and click "next".

    5. a list appears with all the drivers for different systems.  Expand the category that says 'pilot -"graphic  There will be several drivers (one being that shitty laptop with integrated graphics card only and another for great laptops with switchable graphics).  Read the descriptions of each and it is made for laptops with switchable graphics.  Download the right one.

    Once download you, you will need to restart your laptop.  When it starts up, it will be like new.

  • Large graphic lounge - question about wearing a graphic everywhere

    Hi, I'm using PSCS4 and I'm on XP.

    I thought I'd ask this until I started my project.

    I have a job to create a trade show display booth. There are 13 put graphics in place of wall panels. Normally, I see each one in Photoshop. 11 are the same size, half the size, and we're not really apply to this question because it is small and above a door.

    I was instructed to apply a background image of a map of the world to these graphics, but not on each separate chart, but acorss the surface of panels. (could be split it halfway because there is one side, and then others, like an L shape.) Here is a picture of a drawing I received with no top work yet.

    image1.jpg

    I wanted to know if there was a way to do what I think it would get tricky with bleeding involved and such. There are also strips inbetween each Panel (as you can see in the picture) and I guess I want a few things to line it up right. I could do it the way I normally would, while making sure that I get in the right places, but I was wondering if there was a way to throw all this somehow differently.

    Thank you.

    Hi Stella.

    I'm a little confused as to if you're talking about making the full size for the cabin or panels panels for a perspective view rendering. MTSTUNER approached the second possibility. Here is some info you might find useful anyway.

    There are 13 put graphics in place of wall panels. ... 11 are the same size, half the size, and we're not really apply to this question because it is small and above a door. ... I was instructed to apply a background image of a map of the world to these graphics, but not on each separate chart, but acorss the surface of panels. (could be split it halfway because there is one side, and then others, like an L shape.)

    If I understand you correctly, you ask how to create something like below. Except that there will be additional graphs on each panel above the map.

    Here is a way.

    Do a front view of the walls: first create a rectangle the same proportions as the panels. Customized size. Then copy it and move it to the right of the width of the Panel. Repeat the process until you've done 13 panels. I've marked the corners with yellow. The door is black (duh!) Now scale the Panel to the left of the inside corner right width 50% do half a Panel. Now, move the panels on the left until everything lines up again.

    Now stick your card in and turn it to match your view of wall.

    Now split the two-part plan. We need to divide above the door. Thanks to the miracle of the tectonic plates, we have a convenient place to divide the map here. The Atlantic ocean on a line to the East of Newfoundland and West of Africa. With the set selection tool to see the transformation of the controls, I chose the half left and did drag the handle to the right until the corner (yellow line). Then do the same with the right half, align the left edge with the right of the door. (To avoid resampling the card twice, you could split it before adding it, then turn each half to fit.)

    Here is the result. You can now create your individual panels.

    To create the first Panel on the left, Ctrl + click the thumbnail of the layer of the Panel. Select the layer of the card.

    Now copy the selection into a new layer (Ctrl + J). I name this layer of card Board (awesome!) 1. It is now the background for additional graphics. Repeat for each Panel, including panel half.

    Here are the first five boards, including the left wall (I would group). I added a race outside panels to simulate management panels. Then he pushed them just to realign the. Now you can select each Panel and add additional graphics on the map. You will work on a sign at a time, but you can see how the wall looks like as a whole. Repeat for the other three walls. (Or you could consider the three panels to the right of the door going aroud the corner one.)

    If you create full-sized panels or a perspective view, the method above might work for you. At least conceptually.

    To apply the over to a rendering of the cabin, create a perspective view of the room, as described by MTSTUNER. Then merge a copy of each group of wall in a new wall layer. Apply to each new layer of wall to the perspective grid. Below, you can see the result. The work was forshortened and skewed to the right perspective.

    (The following screenshot is presented in DogVision)

    FWIW.

    Peace,

    Lee

  • At startup, Firefox still displays my windows and labels last time, even though I have selected the option to view my homepage.

    Question: Although my option is to show my home page at startup, Firefox still displays my my windows and tabs from last time.

    More details:
    I use Microsoft Surface Pro 3 with Windows Pro 10 and Firefox v 40.0.2
    I chose option to start Firefox to display my home page. Please see attached screenshot. The homepage is the Mozilla Firefox Start Page. However I tried other sites such as www.cognizant.com, www.cnn.com.

    I also tried to start by selecting a blank page. Always on starting Firefox displays the windows and tabs from last time.

    I also deleted the (renamed) prefs.js file and restarted firefox. This step NOT solved this problem.

    Help, please. Thank you

    You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

    The user.js file will be present if you or a other software created this file and normally will not present.

    You can check its contents with a text editor (right click: 'Open with'; do not double-click).
    The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

    You can remove the user.js file if you do not create this file yourself.

    You can use this button to go to the current Firefox profile folder:

    Windows hides certain default file extensions.
    Among them .html and .ini and .js and .txt, and you can see only a file name without file extension.
    You can check the file extension (type) in the file properties in Windows Explorer via the context menu.

  • Firefox not rendering or display the graphics properly, tried everything?

    Firefox not rendering or display the graphics properly.
    When a page loads first, fine, but if you click on a few buttons, then the back button to return to the page of the image is cut in half, or lack of parts of it, on the page what happens, if I delete the page history and refresh, all goes well, once again, I also worked on a web page that does the same thing on the server or locally, I haven't tried any cache, refresh on the page load, ran Firefox in safe mode, my friend has Firefox also and he got the same results, Internet explore, no problem, no problem of Chrome, I need to solve this problem with Web page, I'm working on the side of the code so that everyone doesn't have this problem.

    Try disabling OMTC and leave hardware acceleration in active Firefox.

    You can try to disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

    You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • Re: Tecra S5 - 15 q - monitor display lines vertical and error 43 for GPU

    After about 5 years my Tecra S5 is experiencing problems with its graphics.
    Most of the time the (internal and connected an external via VGA) monitor displays vertical lines, and windows gives an error 43 on the map.

    I was wondering if there is a way to solve this problem, and if this problem could be solved under warranty (although the protohistory of the warranty expired 3 years ago.) .

    In my opinion, it is bad material work and as far as I know only way to fix it is motherboard Exchange. I n t have this model of laptop, but I can presume that the GPU is fixed on the motherboard and cannot be traded separately.

    Fixed under warranty? Of course.

  • Message from Microsoft Windows Error Reporting that says: upgrade your display adapter graphics card does not support DirectX 9.0 or newer

    I have a message that says Microsoft Windows Error Reporting: upgrade your display adapter graphics card does not support DirectX 9.0 or newer.  My screen blanks outs initermittently and icons on the desktop are very grainy? all patches, easy?

    Hello


    Perform the steps in the article and see if the problem persists
    http://support.Microsoft.com/kb/283658

    Hope that helps.
  • Display a pink and green 'tracks' everywhere. No matter what type of program is used. It starts at startup.

    Display has pink and green runs.

    Then sounds like your monitor has failed / default
    You can borrow another monitor to check?
    Is the same thing happens if you start in safe mode? If it is then a graphics card problem

  • How can I STOP e-mails in response to a question, I asked months ago and no longer need an answer for?

    * Original title: stop emails

    How can I STOP e-mails in response to a question, I asked months ago and no longer need an answer for?

    Post proposed by the facilitator for the appropriate forum placed

    Hello

    You will see your name at the top of any message that you posted, like this, DianeFiorentino

    This is a link to your profile page. Click on this link.

    On your profile page, click on the link of the activity at the top of the page. This will display a list of all the threads you have subscribed .

    On the right side of each thread, you'll see a link Stop Emails . Click on this link for every conversation that you don't want to receive notifications for.

    Additionally, if you look closely at the emails that you receive, you will see the link to the bottom of the email.

    You want to unsubscribe from this thread?
    Click here to go to the thread, and then click Stop emails.

    Concerning

  • settings can continue to change for less bright display 20 minutes and never sleep, how to fix?

    settings can continue to change for less bright display 20 minutes and never sleep, how to fix? I took 1 hour, and it keeps changing back how to fix? I recently got a dynex keyboard and it has a sleep button I press the keyboard model number is DX-KBWM2.  How to fix?

    Hello Taperum,

    Thank you for the update on the question and sorry for a delayed response.

    If the problem still persists, there may be a chance that the problem is due to system files, so I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

    Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    • Go to Start, click all programs and open the Accessories.
    • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
    • In the command prompt, type the following command and press ENTER:

    sfc/scannow

    For more information, refer to this link:

    http://support.Microsoft.com/kb/929833/en-us

    Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

    Kind regards.

Maybe you are looking for