2 request - Glide part emulators Windows 7; Set of 8 install the King Quest

Similar Questions

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Hello

  Thanks for posting in answers.microsoft.com

  So that we can fix that Mr is that we do a clean boot using msconfig

  1. Click Start, click Run, and type "msconfig".
  2. In msconfig go to services and hide all microsoft services, once's done it to disable all other services
  3. in msconfig again go to the Startup tab and disable all startup programs
  4. Restart the computer anddo updates

• Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• How to solve the error windows 8007641? Unable to install the update or access iTunes store.

  I keep trying to install the latest windows update and there no 2 x, so I hit the system restore to a point earlier, now it failed for the 3rd time and I get the error code 8007641. can you help me solve this problem? It all started when I couldn't access the iTunes store. Thank you

  Hello

  Update can't install?

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I suggest to perform the clean boot and try to install the update manually and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  http://www.Microsoft.com/download/en/default.aspx

  Method 3:

  I also suggest you to follow the links and contact support apple technique.

  http://support.Apple.com/kb/ts3297

  http://support.Apple.com/kb/ts1368

  http://www.Apple.com/support/

• Updated Windows rebooted my computer and installed the updates last night and now my login password is different and I can not connect. Help?

  I put my computer to sleep last night and when I woke up this morning it has restarted and was sitting on the login screen.  This occurs when windows update itself - and I absolutely hate it by the way.

  When I entered my password, it says that it was incorrect.  I had the same password for a long time, so the only thing I can think is that the update of windows somehow changed my password.  I have Vista Ultimate 64 b.

  I did not create a password recovery disk - how can I get my account to change my password?

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• EliteBook 840 G3: Elitebook 840 G3 clean install of Windows 8.1 - how to install the drivers?

  I bought my laptop working from a former employer, provided that the disk was completely wiped out (no recovery partition or whatever it is) and so I need to do a full clean install.

  I installed Windows 8.1 successfully for an external USB DVD. The system starts, but device drivers are missing, including wireless and wired networks.

  On the website of HP, I downloaded the device drivers for this machine/operating system combination. These downloaded files are .exe files. I put them on a USB key so that I can transfer them to the laptop. I thought I'd install them as follows:

  In the windows Device Manager, identify the network device, right click, select "install driver", point windows in the directory containing the .exe files downloaded.

  It does not work. Windows does not recognize the files .exe as pilots.

  Q1: I'm supposed to perform each of these .exe files (IE, which will install the drivers, and windows will then they are present?

  Q2: Which of the 2.3GBytes drivers should I install? If I install the network drivers Windows will be able to "search the Internet" and find all the other missing drivers?

  Q3: Is it possible to get an OEM installation disc that makes the entire process less painful?

  Thanks in advance for any help and advice.

  You are the very welcome.

• Windows Vista keeps wanting to install the same update again and again. This is the Internet Explorer 8 for Windows Vista for x 64-based systems update.

  This update keeps coming back even if it has been installed at least 15 times. Does anyone know why it keeps doing what/how stop?

  This problem may occur because of corrupted content of the Software Distribution folder.

  Rename the software file Distribution try to access the Windows Update site again.

  How to rename the software D folder in Vista - distribution agent version

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Reboot - without having to restart, the new folder could not be created successfully.

  TaurArian [MVP] 2005-2010 - Update Services

• Downgraded Acer Aspire V3 575 G for windows 7, but impossible to install the wifi driver

  Hi, I got a new laptop yesterday, the model is Acer Aspire V3 575 G 73ZZ. I didn't like the 10 preinstalled with windows so I installed a new copy of windows 7 on it. However, once the installation is complete, none of my drivers work. I went looking for the drivers for my model, but they were all for windows 10 and were not compatible with my laptop. I tried to install the drivers wifi during the night, but none of them work on my laptop.

  Does anyone know what wifi Drivers to install so it can run on windows 7?

  I found the solution to my problem! I did a search on acer and discovered that my device is using Win Driver Atheros Wireless LAN (NFA344) 10 64-bit, so I did a search on Google to find the version of Win 7 64 bit for the driver and came across this page: http://support.lenovo.com/sg/en/downloads/ds105865

  Even if the driver is Lenovo, but I ran on my Acer Aspire V3 575 G and it worked perfectly. I am able to connect to the wifi now!

• Bought a new hard drive and installed Windows 7. I then installed the old hard drive XP in a different machine and now I am told to reactivate Windows XP.

  Bought a new hard drive and installed win 7 to him to replace my old hd in xp. I then installed the old hd in xp to replace a system running under win2k, but I was prompted to save it. can I use the old license key that accompanies the xp or should I get a new license?

  original title: Win2K to XP

  Registration and "Activation" are two different things, registration is not required, the activation is and if the road that has XP on it done from another computer and a "Retail" version, then you will need to activate by phone using your existing product key.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Error 0 x 80070424 in Windows Update when trying to install the updates.

  Original title: in windows xp error 0 x 80070424.

  had downloaded antivirus system music next network.removed Center says this update is disabled when on that I'll update magazine, he says it is. When

  I go to windows update with what happens as soon as you start to express, as the bar moves as if it checks then that it cannot display the window

  error 0 x 80070424

  Hi williamjennings,

  Are which antivirus you referring?

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  You can follow this link and check if the problem persists.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  Hope the helps of information.
  Please post back and we do know.

• Windows XP prevents me from installing the new hardware as my Canon camera and memory card reader.

  original title: problem with new hardware

  last week, windows xp prevented me from installing new hardware, namely a canon digital camera and a memory card reader. Although the system recognizes the material into the machine, when you are looking for auto install it asks me for the service pack 3 cd, which I did not. I never had problems, install new hardware before. Any ideas why this happens?

  Hello

  · What is the service pack installed on the computer?

  · What is the model number of the canon camera?

  · What is the exact error message that you receive with error code if any?

  If you have installed service pack 3 on the computer then you can try the method and check them off below if it helps:

  Change the registry to point to the installation of Windows XP Service Pack 3 files

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. Click Start, click Run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  c. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  d. in the right pane, right-click ServicePackSourcePath, click on edit, type % windir%\ServicePackFiles, and then click OK.

• Windows update repeated says to install the same updates

  OS = vista.
  RE: new updates available
  selected for update.
  Windows says it's installing the updates.
  check "installed updates".
  updates listed.
  These are the updates:
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2572078)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2633870)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)

  Says Windows usually updates installed and ready to turn it back on - it did not.
  The new window updates, explains all the updates above are available and does not seem to recognize that they have already been "installed".
  Suddendly machine may not be used, any open window says "not responding".
  Tried to install the updates again, but same as above.
  Restart the computer.
  I got Thunderbird open and does not and used Firefox to try to access this forum.
  Firefox picked up trying to open on this forum and said not reponding.
  Same as above, nothing had changed and unable to use what whatsoever.
  Uninstalled all the above recent updates.
  The machine works again instantly.
  Open Firefox to access forum, he reported problems with the last session on this site and so I started a new session.
  Everything works well and fast.

  If I look at 'review your update history'
  All the updates mentioned above are presented as successfully installed twice.
  If I look at "the new updates are available," all the installed and then uninstalled updates are listed.

  So before I try to install the updates listed above again, what known problems are there regarding their.
  Why do you have the "check updates insist I had not installed?"
  Why updates has not asked to restart the computer?
  Why install the updates above make it impossible to use any programs?

   

  Hello

  Method 1:

  Run the troubleshooting utility from the link below and see if that helps:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

   

   

  Method 2:

  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• 4540 proBook s with 8.1 Windows 64 bit can't install the AMD driver

  I reinstalled my 4540 s Probook HP for Windows 8.1 of ISO MSDN AA and I can't install the display driver.

  I have two graphics cards in ntb: 4000 HD Intel and AMD Radeon HD M 7650

  I downloaded this driver:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457&SP...

  (SP59143)

  I installed it - it allows me to switch graphics, run the control center catalyst, but if I select high performance graphics gard then many games cannot run. For example: League of legends (graphics must support at least model shader 2.0), Call of duty 4.5 - unknown error directx,...

  In Device Manager, two graphics cards a driver date August 1, 2012 and the version of the driver 8.982.6.0 from AMD.

  I have also tried to install this driver with Win 8 compatibility as administrator and in windows started with don't require no signed drivers and still no luck.

  Hello world

  You may now find the latest AMD driver for your Probook 4540s here:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5229459&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4158%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  I hope that this solves all your problems!