2-sided accessory does not not on C7280

Similar Questions

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• Two-sided printing does not

  I'm under mountain lion with my new hp7520 printer. When I print, I double-sided "disabled" on presentation settings, but always get 2-sided. Any way to make this work?

  Thanks a lot for your help request, but I have the settings as you suggest.

  After a period of reflection of my frustration, I tried something else and made a discovery that has solved the problem. I did spend printing 2 sides of 'off' to "the long side binding" and then print the document. It is printed 2 sides, as I expected.  When I turned back to 'off' (in fact, he went back to "off" automatically) and reprinted, it worked properly and printed on a separate sheet. I think that maybe the machine just need a starting aid. Yay! I hope that the problem is resolved and the printer will not return to his old antics.

• Want to 5532:2 - sided printing does not work - want 5532

  I try to print a document 2 print sides.

  Checked the box 2 faces, went to the layout and choose binding on the long edge. Then print and only one print at a time, no double-sided.

  Had a HP printer before (who died) and with the exception of check 2 box sides, had nothing to do.

  Bougth this printer precisely because it is supposed to print double-sided.

  Help!

  Subsequently resorted to call HP support for the United Kingdom.

  Thanks for your help!

• DAQ signal accessory 50 pins i/o does not

  Why is the 50 IO pins in my DAQ 6014 does not? Please help guys

  When I use the analog channels available on my signal accessory, it works. However, if I use the analog channels on the MIO 50 pins, it doesn't quite work.

  I need to activate it or what?

  You don't make much sense. 50 pin connectors are used to connect a DAQ 50 equipment pins. You should really use something like the map of derivation of the scb-68.

• my wireless radio does not work on my hp photosmart c7280

  My newtowrk is running. I recently had to erase hard drive and reload. My wireless hp photosmart C7280 all-in-one does not work.

  My operating system is Windows Vista Home Premium 64-bit. HP Pavilion Desktop c6700y.

  The radio is really dead?

  Reset the printer.  Turn off the power, then hold # and 6 keys while and a few seconds after turning it on.

• Software C7280 does not (Solutions from HP)

  Recently bought C7280 all in one and loaded on my laptop - using the XP SP2 operating system.  I share this printer with a colleague who has a pavilion with Vista 64-bit operating system.  Had to reload the software and under HP solutions icon does not open.  The software has been uninstalled, then reinstalled from the CD of origin and then uninstalled and reinstalled since last download on the HP site without success.  Help

  Hello

  Try the following steps in order to oopen your HP Solution Center.

  1. open computer > C: / > WINDOWS > system32 > C:\windows\system32\macromed > flash and check the version of your flash player

  2. check if you have flash9b.ocx

  3. If you run the flash9butil.exe please and it will update this version 10 a

  4. try to open the solution Center

  5. If symptoms persist, try to do a uninstall and reinstall the software

  reminders: Please give some input if the problem has been resolved

  These troubleshooting steps is not sure the resolution. It is up to you to try it.

• LaserJet 2300d: Laserjet 2300d does not print double-sided with Windows10

  My excellent laserjet 2300d worked many years.

  Since the upgrade to Windows 10, he claims that duplex printing is not supported. Maybe it's a coincidence, but how to restore duplex printing?

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• C7280 does not print why?

  I have a printer c7280 all-in-one I've had for many years, and have never had a problem, but this has changed today, and I can't understand what is wrong.  I'm clinging to my wireless router network and allows to print from my PC and my laptop and still have never had a problem with either.  Today, I tried to print from my laptop and it does not work.  It is said that he sent the document to print, and then after a few minutes it give me an error that it can't print, and the link to see why said calling someone.  I am on my PC and messed with her and she did the same thing.  I run Windows XP on the PC and windows 7 on my laptop.  I ran the HP software to look for problems on both computers and he said that everything was fine and then I tried to print a test page and then goes back to the same question as above.  I got the direct connection to my router and then re-hung, HP software re is installed on both computers and the printer is off and let it rest then turned back, but also completely off the hook it and then set it back up, all with no resolution.  open to ideas?  the scanner and the work of copycat on the printer so that the material is fine, but why the computer says that it is connected, but it won't get the information to print?  Thanks to anyone who can help!

  Jason

  OK, we will solve this problem for good.  Its a little annoying, but it should be fixed forever.

  First, let's define an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS entry.  Do not fill in the second.
  -Click 'apply '.

  Stop the router and printer, start the router, wait, and then start printing.

  Start > Control Panel > printers (devices & printers on Win 7).  Remove all instances of the priner.

  Finally, add again in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > printers (or devices & printers for Win 7)
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• doc word C7280 does not print

  I have the all in one C7280: doctor says hp properly connected wireless and formateront print test page and e-mail pdf format documents.  The C7280 does not Word 2010 - print error message says no installed printer.

  I reinstalled the driver, run diagnostics and updates and nothing happens - still the same error message.  Would appreciate any help!

  Kathleen

  That is great news!  Thanks for posting your work around as well!

• C7280 Installation error: the specified service does not exist as an installed service

  All,

  I have an AIO C7280 printer that is connected wireless to my router.  I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well.  I have no impression of question from the pc.  However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer.  I chose the network and the error appears saying "the specified service does not exist as an installed service.  I ping the printer from the laptop so I know it can 'see '.  I don't know what to do.  I have uninstalled/reinstalled several times without success.  Can anyone help?

  Thank you.

  Edit for more information:

  After building a log of installation failure and 'details', that's what I see:

  Error Situation code: 20364041

  Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.

  LaunchNetworkInstall retrieves the value unexpected 1060

  RUN: 50 return stops Driver UI plugin

  Exit code = 50

  Message edited by gatorman on 09/18/2009 16:57
  Message edited by gatorman on 09/18/2009 17:10

  The service that the error message refers is the HP network devices support service. Try this...

  Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.

• C7280 does not print

  Hello

  I have a Photosmart C7280 AIO which suddenly does not print and has been 'offline' for three days.

  I have Win 7 and a Wi - Fi connection.  Doctor of printing HP and Scan is unable to resolve the situation; I tried several times and he tells me to contact my 'network administrator' (?). I unplugged my modem, printer cables, etc. and turned back, but no dice.   I tried to uninstall the printer software, but couldn't even find what I initially installed a couple of months.  I then tried to reinstall the printer driver, hoping a newer version of the software would be available and I would have the option to uninstall the old one, but got a notification that the installation was not successful.  I tried all of the solutions that I can find for the past 12 hours.  Please help before I take a hammer to my new printer!

  Thank you in advance for the clusters!

  Hi Sunshyn2005,

  Thank you very much for your answer!

  A few hours after my assignment - and loads more than frustration, I finally resorted to the HP customer service.

  Three different technicians spent three 3 hours (!) clean my computer of malware and pop-up windows which had started to exceed his function (although it is a relatively new computer (September 2013), which I know can have no impact).

  I was told that they could be the reason why my computer was grateful is no longer the printer.

  My printer took over the feature after cleaning and replacing of the software of my printer.

  I recommend strongly HP customer care for those who have been unable to solve their problems with HP online support (or who simply can't take the stress out of the non-operational equipment more, like me.)

  Nevertheless, thank you for your suggestions. I hope that others with a similar model can benefit from your advice (assuming that their machines do not require a computer scan 3 hr.) ) !  Best of all, not need hammer!

• Photosmart C7280 will not communicate with the network. The diagnosis says that the Radio does not

  Photosmart C7280 C5582A work through a MacBook via a Mac (OS 10.5.7) wireless router was working fine last week.  Today when I tried to print, the printer was stuck in the "printing page 37%.  When I checked the Print Manager, the printer was "slowed" and since I had a lot of trouble with this printer connection before losing, I did what HP told me the last time which was to remove the printer and then recharge it.  Except that this time, once the printer has been deleted, he could not find the printer even after I restarted the wizard and reinstated the SSID and WPA many times.  I have reset the printer and the router by turning off and disconnect power provided, but he still had the same problem.  When I ran the diagnosis, he told me: 'Pass on Radio, Radio work on failure, not plugged cable Ethernet-Pass' the rest of diagnosis is "not run" and other data on diagnostic tests are the Mac addess.  The Diagnostic says the "wireless radio does not work.  Contact HP support.  Unfortunately, it's evening Sat and HP support is closed.  Any help or is this printer dead?  (I spent a fortune on ink cartridges)

  It is indeed a hardware problem then.  I'm sorry.

  I always believe that repair costs would be better put towards buying a new printer.

  However, there may be options that I'm not aware where do not have access to.  This document has some support listed options.

  However, I recommend you contact HP support at the 1-800-474-6836 (to the United States and Canada).  Phone support can provide that more than an estimate on the repair or replacement of the printer with HP and you could compare this with the cost of a new printer.

  A new printer is under warranty and most likely to be an improvement on an older printer.

• HP laserjet 3390 does not Win 8-sided print

  I want to install a new computer HP Envy Phoenix 800 with Windows 8.  I am trying to install a printer HP 3990.  I can get it to print single sided, but it won't allow properties to select double print side and the scanner does not work.  Other features of properties are not available.  I downloaded new drivers from Microsoft, but the printer will not work correctly when it is connected via a USB port.

  Thank you.

  Ken

  Hi Kenneth,

  You can try to uninstall completely to reinstall the drivers for the HP LaserJet 3390 model from this link and check if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=1140788&TaskID=135&prodTypeId=18972&prodSeriesId=1140785&lang=en&cc=us

  See the exact steps in this link and check if that helps:

  HP LaserJet printers, multifunction and all-one - install the driver included in Windows 8 or Windows Update

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c03470332

  Also, follow the steps in this Microsoft article troubleshooting and check if that helps:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin