2 Smartband does not connect after the software update

Similar Questions

• HP Photosmart D110a does not connect after the software update of the router

  I'll try a restatement of my first message:

  Two days ago I had problems with my Internet service provider modem.  This problem has been solved, but leads to a second problem still does not connect to the internet.  Then with the help of technical support D-Link, an update of the software has been downloaded to my wireless router and installed and now I can connect to the internet.

  But today, I had to use my printer/scanner for 2 1/2 year, HP Photosmart D110a, it is not connected through the above wireless router.  (The blue light on the printer blinks just).  Tech support says I'm out of warranty, so I hope someone can help me here on this forum.

  Thank you!

  Glad you got it to work, please mark it as Solution accepted so that others can search and find the answer too.

• SmartBand does not connect since the android update

  Has anyone else had problems connecting to their SmartBand since the update to android 5.0.2? My group is fully charged and I uninstalled then reinstalled smart connect, but I don't always have it connect. Help!

  Try the settings then applications then swipe all then find and open Smart connect then press stop Force then wipe data and clear the cache, and then restart and try to connect

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

  After you download the last updated September 27, lightroom does not start on my mac.

  Used to work without problems so far.

  Tried to disconnect the last clouds and again without success.

  Thanks, that worked.

  Now, I have to do the update again hope that will work as well...

  Do you have any idea what caused the problem?

  Concerning

  Christian

  MIT thank wurde

  Hans Christian Behrendt

  2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

  Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

  by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

  Lightroom *-see complete discussion

  https://forums.Adobe.com/message/8015642#8015642>

• My iPad air2 will not charge after the software update

  My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take 30 seconds

  See you soon

  Brian

• Firefox does not take after the new update homepage

  After the new update of firefox, it resets my setting of the home page that I made
  Randomly, it loads a search engine called search.conduit.comof interfalls.

  How can I stop this!

  You can check in "Windows Control Panel > programs ' recently installed programs see if something of conduct appears.

  • Control Panel > programs > programs and features > uninstall or change a program
  • Click the installed column to sort by this column

  You can open the topic: config page through the address bar and to search for the prefs that refer to led and reset associated user defined prefs ("BOLD") through the context menu on the default value.

  • http://KB.mozillazine.org/about:config

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• A series of satellite does not start after the BIOS update

  After update bios with the downloaded utility my laptop does not start.
  Do you have this case covered by the warranty?

  I'm not sure if this would be covered by the warranty. You must contact the ASP in your country for details, but I assume that it s not covered.

  PS: Did you try this work around:
  -remove the battery, disconnect the adapter
  -wait ~ 40 min
  -connect the two devices again and try to turn on the laptop

• HP Pavilion dv9260nr does not start after the bios update

  After the HP Health Check, it was recommended that I have updated to the current bios.  After you have downloaded and installed, the computer would not start.  Instead, it emits a long beep and 2 short beeps and the screen is blank.  How can I recover a bios update failed?  Is there a way to return the computer to the bios Setup?

  I thought I would post here to help others as I just spent 5 hours to fix this problem. I have personally experienced this on two different computers, both are model DV9260NR. I woke up in the long and short two beep power. The first time it happened, I tried to fix the BIOS by using the recovery disk, but it didn't work. I tried this using a USB floppy like any other player. The floppy drive should get accessible, then machine would be on a second beep then stop, but it would remain under tension. The first time around I gave up and eventually return it to HP as it was under warranty. This time above the current problem computer is more under warranty so I decided to test out of old college. After trying several discs crisis different Phoenix, I finally found one that worked.

  I downloaded crisdisk.zip here:

  http://www.mediafire.com/?3ccb9m0kv0m

  Followed by the latest bios from HP for the DV9260NR

  FTP://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42187.exe

  I used 7 - zip to extract the files in sp42187.exe and crisdisk.zip

  go to the folder where you extracted sp42187.exe and rename it to 30BBF2D. WPH into the BIOS. WPH

  Copy BIOS.wph to the folder where your snippet CRISDISK.zip

  I have created my disk in Vista, so don't worry about going "Real DOS".

  YOU MUST USE CRISDISK TO CREATE THE DISC!  SIMPLY COPY THE RIGHT FILES ON A FLOPPY DISK DID NOT WORK!

  Open a command prompt, I used command.com not cmd.exe

  CD to the folder CRISDISK.

  At the prompt enter: "CRISDISK. "BAT HAS:

  Finally, put in a blank disk and follow the instructions.

  Once the disk created, slap this puppy in a floppy USB drive and plug it into the computer.  I didn't need to use as or Windows + B, B FN hotkeys to trigger the BIOS recovery. The system entered in the BIOS for me recovery mode and tried to access the USB floppy.  I noticed that not all USB ports will work.  I plugged my USB stick, floppy to the next to the power supply.  If all goes well just turn on the computer with connected USB floppy drive and the disc in the drive. As before the system beeps once per second during playback of the disc.  The disk activity, arrested again, but this time that the system kept beep immediately after discontinuation of access to the drive.  These beeps point you out that the BIOS is flashed, it's just leave turn. When it was made the machine itself set off.  If yours is not, so I doubt that the BIOS recovery will succeed. I then unplugged the USB floppy drive, turned on again and to my surprise I was greeted by the HP and the BIOS logo!  I hope this helps people difficulty of their DV9260NR.  I met four dv9260nr machines and two of them does not update the BIOS using WinPhlash and the finished machine trashed, not good statistically.  I hope that others with the same model will be able to get their machinery running. I'd be curious to know if it works for others.  Post here if you are or do not succeed using this procedure. Good luck!

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Satellite L50-A-160 does not start after the Bios Update

  Hi, first of all, this is first post.

  I have 2 satellite L50-A-160 with bios 1.1

  Problem: seems to go to sleep after a few minutes, even working on them (even with both)

  So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
  In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

  What is the problem with these computers?

  Besides; very poor battery, always shows 0% available and not charging...
  Does anyone have a solution?

  Best regards
  -always in the hope.
  GT

  Have you tried to change in Power Options?

  See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

  

  and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

  what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
  He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

  have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• HP compaq 6510 b does not start after the BIOS update

  Hello

  When I turn on my laptop HP compaq 6510 b it DISPLAYS this message: your bios has not finished updating 6510b.after flashing the bios of the laptop does not start .it displays the same message (your bios did not complete the 6510 b update) and turns off. I cannot access the bios by pressing F10.the bios version was F16 and flash by F20 .will help thank you very much.

  I'll have to return a verdict of laptop motherboard bricked due to a failure of the BIOS upgrade. Sorry, but it happens.

  This means that this would require the replacement of the BIOS chip to make it work again.