2 undo Tablespace two ONLINE, how to remove the previous cancellation of the SCT

Similar Questions

• Can you tell me how to remove the microsoft business prosuctivity standard costume online licens

  Can you tell me how to remove the microsoft business prosuctivity standard costume online licens

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

  It will be useful.

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• How to remove the white space between two response reports

  How to remove the white space between two response reports
  
  In the section of dashboard, I have 2 rqeuest. Each query returns Table view. When I view the dashboard, it shows a blank separating 2 table views. How can I get rid of the band of white/white space?

  See this link

  Re: Remove the space between the two reports on the dashboard page OBIEE Section

  Kind regards
  Sandeep

• Satellite A30 - how to remove the hard drive

  Hi, new here...

  Can someone tell me how to remove the hard drive in my Tosh A30...

  Thank you
  captainp

  Hi Tim,.

  The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

  The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

  HTH

• Satellite M35 Pro - how to remove the screen bezel?

  Hey everybody,

  Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

  Can you please help me with this!

  Thanks in advance!

  Hello

  Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
  You could damage other parts that you know

  You're stuck on the LCD mask?
  As far as I know the LCD mask is covered by two screws that are hidden under the joints.
  You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
  Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

  But note; Be careful, don't use any force!

• CAMILEO P10 - how to remove the battery?

  Hello

  How can I remove the battery from my CAMILEO P10?

  I want to use two batterys, but cannot remove the first :(

  PLS HELP!

  Thanks in advance!

  Hello

  The battery is placed at the bottom of the unit close to the SD card slot.
  It shouldn't be very difficult to remove the battery.
  You need get the cover that protects the battery bay to gain access to the battery. Then press the battery toward the inside to release.

  Welcome them

• any ideas on how to remove the software malicious zebrouss?

  any ideas on how to remove the software malicious zebrouss?

  This thing I replaces my setting of search in safari - can get rid of it - don't know who got it

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Save all data first.

  Some of the most common types of adware can be removed by following the instructions from Apple. But before you follow these instructions, you can try an automatic removal.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted, not all. There is no such thing as the automatic removal of all possible malware, either by OS X third party software. That's why you can't rely on software to protect you.

  If the malware is deleted in your case, you will still need to make changes to the way you use your computer to protect you from new attacks. Ask if you need advice.

  If the malware is not automatically deleted, and you cannot remove yourself by following the instructions from Apple, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Satellite A350 - how to remove the password?

  Hello world
  I am neck and I joined just the website
  I have a problem with my Satellite A350

  I bought this laptop from an auction of trust, not on the net, with the attached unfortunately password that don t work of password, but clams House auction that he does,
  What happens is when I turn on the first screen you see is looking for a password, I put in the so-called password that was given to me, but it won't work. When I try to enter the BIOS setup, he still wants the password to continue.

  This computer using Vista and I can't even replace the Vista disc in the DVD player because will not work because the op system is not started
  I hope someone knows how to pass the password or can help me. I tried to remove the internal battery but no go, my email is [email protected] if you want to explain myself better things

  Thank you to everyone
  Col

  Hi neck!

  It's not so good news

  I m not a Satellite A350 owner but if you want to remove the password you must contact an ASP and ask for help. Laptop technicians are know how to remove the password and so I think they can help you best.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Z500 how to remove the battery?

  
  

  Hi Flory2011,

  Len mentioned the Maintenance Manual material that is found on the link below...

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_z_p_series_hmm_v1.0.PDF

  You can also watch online tutorials on how to remove the bottom cover and the battery at this link in the section FRU...

  http://service.Lenovo.partner-management.com/content/CourseWarePublic/18359/player.html

• How to remove the laptop battery?

  Hello!

  My question seems a little odd, isn't it? I bought a HP Pavilion dv7-1285DX two months ago. I don't know how to remove the battery from the laptop! Sounds crazy, I use HP laptop for 5 years, but I could not understand how the hell should I take the battery from this new guy! Could someone please tell me what to do. If you know how to do it please show it with a photo or something, or set up a website or video or something.
  Thank you and all comments are appreciated.

  Siar

  Message edited by Siar on 13/10/2009 02:26

  Hello

  Follow these steps: -.

  BE VERY CAREFUL!

  Before you begin any Setup or uninstall procedure:

  1 shut down the computer. If you do not know if the

  computer is turned off or in hibernation, turn on the computer.

  and then stop it through the operating system.

  2. disconnect all the external devices connected to the computer.

  3. disconnect the power cord.

  4. remove the battery by following these steps:

  a. turn the computer upside down with the front

  towards you.

  b. drag and hold the 1 battery release latch to the left.

  (Disengage the front edge of the battery of)

  the computer).

  c. lift the front edge of the battery 2 and bring her back.

  d. remove the battery.

   

  Reverse the above procedure to install the battery.

• How to remove the virus boostspeed.exe

  How to remove the virus boostspeed.exe

  Hi Laurence,.

  As far as I KNOW, you're talking about Auslogics Bootspeed, and it is a program (even if some consider how he acts and what he does to be very similar to how the system will react as if he was infected).  For technical support, see: http://www.auslogics.com/en/support/.

  If it's this product, there seems to be any special product online removal process (but perhaps custom support can help). If it isn't this product or there is nothing like it on your system, then why do you assume that it is a virus - are guessing you or some AV programs, told you that (and if so, which) and how locate you the file name as being the problem?  What is the full path to the file (for example, C:\Program Auslogics... or other)?    What security software you have installed (all names and the exact version of each)?  What version of Windows are you using?  Indeed, please see http://support.microsoft.com/kb/555375 for ideas on other information that will help us.  The more we know, the better we can help and the more focused we can make recommendations.

  I would try the following: start by creating a system restore point, and then back up the registry as well (just to be on the safe side).

  Download the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html and use it in advanced mode to completely remove Auslogics Bootspeed.  If it does not work because it says it is running (which is possible if there is probably not), then start safe mode and try again to remove use Revo in Mode safe.  The chances of success are much higher now that it is not likely to be running in Mode safe.

  I hope this helps.  Please get back to us in all cases, and if it haunts you again, please answer these questions as well as what happened when you tried to remove it as suggested.  On this basis, we will have a better idea if we treat just a difficult program to remove or legitimate an infection of any (or possibly both) and take the necessary measures from there - but we need to learn more and to see if the simple answer works (or why it failed).  We desperately need your help here (provision of information) to be able to help (with recommendations and options and courses of action - or more questions).

  Thanks and good luck!

  Kosh

• How to remove the default for a limited only account gateway (with static ip address)

  I have 1 pc with 4 accounts 1 account administrator and user the rest is limited accounts. I use a static ip address and the question is how to remove the default gateway on these limited account so that they cannot access the internet

  The entry door is fixed to the adapter and selectively cannot set properties of the different adapter for different users, all users use the same adapter.

  With Internet Explorer (does not work with other browsers), you can configure a proxy server with a fake address, you can do this through Group Policy, or you can do it manually for each individual user through the Internet Options settings.  You can set the proxy server address map of loopback (127.0.0.1) or you can set it to a bogus address of your private address range (usually the range 192.168.xxx.xxx)

  If you are using other browsers, you can use NTFS permissions to deny access to the Explorer or the program directory or you can use software restriction policies to deny access to specific programs.

  Alternatively, you can use a logon script to activate the network connection service when you open a session and the other to turn it off when you log, but if you do this you will disable the entire network for limited users if it cannot be a solution for them.  The script can be a simple two-line script:

  Logon script:

  SC config Netman start = demand
  net start netman

  Logoff script:

  net stop netman
  SC config Netman start = disabled

  These can be useful:

  http://www.howtonetworking.com/Internet/restrictie11.htm
  http://www.christianblog.com/blog/abelajohnb/disable-Internet-access-in-Windows-for-specific-user-accounts/

  John

• How to remove the units listed in the window of the autorun program

  Does anyone know how to remove the automatic launch of units? Earlier, I installed several of my old mobile phones, which I don't use anymore, but when I open the autorun program, they are listed (some several times) and I can't seem to uninstall. Would be very happy if someone knows how to solve my problem. :)

  Original title: Wireless units in autorun

  Hi Bijei,

  • It is a program to AutoPlay or AutoRun?

  I suggest you open the editor from the registry on your computer and check in below location if the old mobile entries are listed. To open the registry editor follow the steps below:

  a. Click Start.

  b in the start search box type regedit and press to enter.

  (c) in the registry editor, navigate to the following location.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers\KnownDevices

  or

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers

  d. Locate the old entries from mobile device to the above address.

  If you are able to find the entrances to the location above, you can click with the right button on the mobile device entries and remove entries. After you delete the key, restart the computer and verify if they appear in the list of AutoRun again. Before you remove the key make sure that you back up the registry keys.

  Registry warning:

  Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, proceed as in the KB Article:

  http://support.Microsoft.com/kb/322756/

  Hope this helps and let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.