200077 error has occurred to the property trigger Node DAQmx DAQmx Start Trigger (analog Edge.vi:1-> CRT with trigger

I created a program that reads analog data and draw a waveform, but I need to stop the program when the voltage drops to a certain tension. When I tried the analog edge trigger it showed the error in the subject:

Reason: The requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

Property: Trig startup type

Requested value: analog edge

You can select: Digital Edge, no

I understand what the analog trigger is not available for my DAQmx version, without again getting equiptment, can I use a trigger to stop reading data at a specific voltage?

How to start and stop a similar read digital triggering?

Thanks in advance!

Ah! Well, then the Boolean value of status would be connected to the State of the thread of the unbundled error, Boolean stop to the stop button and the Boolean value to the right would be the stop for loop itself... so something like this (see image).  This is an excerpt from LabVIEW 2014, so it can not easily fall in your version, but I hope it's clear enough on how you can wire it to the top.

Tags: NI Software

Similar Questions

  • None of my troubleshooting services work "an unexpected error has occurred and the convenience store could not be started" 0x8007045A error

    I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it

    Hello Max,.

    Thanks for posting your query on Microsoft Community forum.

    I would be grateful if you can provide us with the following information to help us better understand the issue.

    1. You did it all change (hardware or software) before the show?
    2. You receive error message when running the troubleshooter from network?

    0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors.

    There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

    Try it out below mentioned steps and check if it helps.

    Method 1:

    Update or reinstall the Microsoft XML parser

    To download the latest XML parser, visit the following Microsoft Web site:

    http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx

    (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx)

    Method 2:

    Replace corrupted files

    To resolve this issue, follow these steps:

    1. Copy the following DLL files in the C:\WINDOWS\SYSTEM folder on a computer that runs on the computer that is experiencing the problem:
    • Msxml3.dll
    • Msxml3a.dll
    • Msxml3r.dll

    2. after replacing the files, you must save the files. To save the files, follow these steps:

    1. Click Startand then click run
    2. In the Open box, type REGSVR32 C:\WINDOWS\SYSTEM\MSXML. DLLand then click OK. You receive a message when the registration is successful.
    3. Repeat steps a and b with the following files:
    • C:\WINDOWS\SYSTEM\MSXML2. DLL
    • C:\WINDOWS\SYSTEM\MSXML3. DLL

    4 restart your computer.

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • ORA-00604: an error has occurred at the SQL level 1 recursive

    Hi all

    I made the full database expdp and impdp Production to test the server its success but during the creation of any user or change password its me poster below error

    SQL > create user identified by bam bam
    2 default tablespace users
    3 tablespace temporary temp
    4 unlimited quota on users;
    create user bam identified by bam
    *
    ERROR on line 1:
    ORA-00604: an error has occurred at the SQL level 1 recursive
    ORA-06502: PL/SQL: digital or value error: character string buffer too small
    ORA-06512: at line 7


    SQL > alter user identified by 12345; system
    change the system of the user identified by 12345
    *
    ERROR on line 1:
    ORA-00604: an error has occurred at the SQL level 1 recursive
    ORA-06502: PL/SQL: digital or value error: character string buffer too small
    ORA-06512: at line 7

    kindly help me to solve this problem.

    Thank you.

    One last thing. 100% make sure error is defined as partners on the issue of Test database:

    change the system '_system_trig_enabled' = FALSE;

    And then try to create/modify the user. For example:

    SQL> create or replace
      2    trigger ORA_06502
      3      after alter
      4      on database
      5      declare
      6          v_str1 varchar2(1);
      7          v_str2 varchar2(3);
      8      begin
      9          v_str2 := 'ABC';
     10          v_str1 := v_str2;
     11  end;
     12  /
    
    Trigger created.
    
    SQL> alter user u1 identified by u1
      2  /
    alter user u1 identified by u1
    *
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    ORA-06512: at line 6
    
    SQL> alter system set "_system_trig_enabled"=FALSE;
    
    System altered.
    
    SQL> alter user u1 identified by u1
      2  /
    
    User altered.
    
    SQL> 
    

    SY.

  • I can't send an e-mail. I get a message that says "an error has occurred on the POP3 mail server. What can or should I do? Thank you very much

    As I said, I use Mozilla Thunderbird for my emails. I can't send an e-mail. All I get is a message saying: "an error has occurred on the POP3 mail server. What should I do to get this working and sending emails? Thank you, Gary

    Suggest you try the Thunderbird support forum at http://getsatisfaction.com/mozilla_messaging.

  • How can I fix, "an error has occurred in the script on this page line: 2107"?

    How can I fix "an error has occurred in the script on this page line: 2107, Char: 1? I've recently upgraded to Explorer 9

    Hello

    I'll try to uninstall IE9 as shown in the link below.

    http://www.uniquetipsonline.com/how-to-uninstall-Internet-Explorer-9-from-Windows-Vista-and-Windows-7/

    When this is complete and you have restarted the PC, see if you can now print.  If everything works well, try reinstalling IE9 with your security software temporarily disabled during installation.

    Kind regards

    DP - K

  • Another thing appears and it says: "an error has occurred in the application. I hit restart request,

    I have a problem with my BSplayer. I'm trying to open a video and the BS 'bar' appears, but there is no video. Another thing appears and it says: "an error has occurred in the application. I hit restart request, it did not work. I also tried to see the bug report, but I couldn't understand him. Please help me. Moreover, it worked great yesterday. And I also tried with other videos but with the same result.

    Hello

    Uninstall/reinstall or you might ask their Support Forums.

    Cheer.

  • Script error it appears on every page. An error has occurred in the script on this page don't you wanty to continue. How can I get rid of him.

    A small boc appears in the center of my screen.  Says: Script error on top.  Then, an error has occurred in the script on this page do you want to continue running the script on this page.  YES or NO how to stop this box to appear.

    Go to tools-Alt | Internet Options | Advanced (or control panel |) Internet Options | Advanced) in IE and the box disable script debugging and uncheck the box to show a notification of every script error.

    Steve

  • Media Player an error has occurred in the script on this page.

    When I try to find album info I get the following:

    An error has occurred in the script on this page.

    Line: 1

    Tank: 243

    Error: Automation server can't create object

    Code: 0

    http://fai.music.metaservices.Microsoft.com/fai/scripts/default.js

    Do you want to continue running scripts on this page?

    Hello


    1 did you change on your computer before this problem?
    2. who is the operating system installed on the computer?
    Method 1:
    You can run the troubleshooter in the Windows Media Player library.

    Open the troubleshooter in the Windows Media Player library

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

    Method 2:
    You can try to re - register wmp.dll file.
    a. click on start.
    (b) in the type box command prompt search.
    c. right-click and select run as administrator.
    d. type the following commands

    regsvr32 wmp.dll, and ENTER.

    regsvr32 jscript.dll and ENTER.

    regsvr32 vbscript.dll and ENTER.

    Method 3

    You will have to perhaps to regenerate the database of Windows Media Player and see if it works very well.
    To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
    a. exit Windows Media Player.
    b. Click Start, in the search for box %LOCALAPPDATA%\Microsoft\Media Playertype and then click OK.
    c. Select all files in the folder and then click on Delete on the file menu.
    Note: You don't have to remove the folders that are in this folder.
    d. restart the Player Windows Media .

    Note: Windows Media Player automatically rebuilds the database
     
    Method 4:
     
     
    Windows Media Player, all by going online to find the information of the Album follows the same set of rules that governs the internet Explorer. Therefore, you can follow the steps mentioned in the article below for a possible resolution to the question:
     
    How to troubleshoot script errors in Internet Explorer
     
     
    I hope this helps.
  • Error at startup, "an error has occurred in the program during installation... ox80070002.

    Original title: Constanr Error Message at startup.

    When I start my computer the message appears on the screen that says "an error has occurred in the program during installation... ox80070002" How can I fix?

    Open log on to Windows as administrator or an account with administrator rights.
    Click Start | All programs | Accessories | System Tools, and then click System Restore.

    Then, in the window system restore, click on the option "Restore my computer to an earlier time" (Note: this option)

    may already be selected), then click Next.
    In her select a Restore Point window, use the calendar to select a date before the day of the change or problem o

    Next.
    Note: A system restore message may appear that lists configuration changes that system restore will make. Click OK.
    In the page confirm the Restore Point selection, click Next.
    System Restore will now restore Windows XP configuration, and then restart the computer.

    Finally log on to the computer (using the same Admin account).
    The system restore restoration complete 'window' is displayed.
    Click OK.

    Your fact restore the PC to the point in time, you have selected.

    J W Stuart: http://www.pagestart.com

  • an error has occurred in the script on this page. expected tank 21079 error code line 2 0

    Windows media player 11
    an error has occurred in the script on this page.
    line 2
    Char 21079
    expected error
    code 0

    Hello

    Thanks for the post. I understand that you meet the on Internet Explorer script error.

    I suggest you check out the link and follow the steps.

    How to troubleshoot script errors in Internet Explorer

    http://support.Microsoft.com/kb/308260

    Hope it will be useful.

  • Message: "an error has occurred in the script.' when tried to open services

    Original title: Internet Explorer Script error

    When I go to administrative tools, and open Services, a notification stating 'an error has occurred in the script.'

    Online: 31

    Tank: 12

    Error: Library not regisetred

    Code: 0

    URL: res://C:\WINDOWS\System32\mmcndmgr.dll/views.htm

    Pls help me solve the problem.

    I am using windows xp sp3 and IE 8

    Hi daveliew1998,

    Try these steps and check the result.
    Step 1: Scanner of sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
    a. Click Start, click Run, type cmd and click ok.
    b. at the command prompt, type sfc/scannow and press ENTER.
    c. once the analysis is complete, restart the computer and check if the problem persists.

    Note: You will be asked to insert the Windows XP disk, if a file is missing.

    For more information, see Description of Windows XP System File Checker (Sfc.exe)

    Step 2: If the problem continues, check if it runs in safe mode, and you might consider the publication of details for further assistance
    See start the computer in safe mode

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I'm unable to print Web sites. I get the error: "an error has occurred in the script on this page. Error: class doesn't support automation. »

    My printer does not work online I get. An error has occurred in the script on this page. Error: class doesn't support automation. Could someone help me please.

    Hello

    1. what version of internet explore do you use?

    2. What is the brand and model of the printer?

    3 - is the problem occurs when you use Internet Explorer or other documents too?

    4 have have there been recent changes made on the computer before the show?

    Please try following methods and an update with the results.

     

    Method 1: Impossible to print or view the print preview of a Web page in Internet Explorer

    http://support.Microsoft.com/kb/973479

    Method 2:

    If you are having problems with Internet Explorer, I suggest you to refer to the links and check if it helps.

    Correct errors in Internet Explorer

    http://support.Microsoft.com/kb/822521

    How to resolve script errors in Internet Explorer on Windows computers

    http://support.Microsoft.com/kb/308260

    Let us know if it helps.

  • The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

    Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

    The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

    The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

    Help! Thank you

    Lisa

    Hello

    -No, I don't have third-party backup programs installed.
    -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.
    Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.
    I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.
    Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...
  • When I try to print an e-mail I get an error saying "an error has occurred in the script on this page".

    original title: printing email problem

    When I go to print an e-mail I get a dialog box to say that "an error has occurred in the script on this page" and will not print and computer freezes and I have to restart. He just started this. Why and how to fix?

    Windows Mail uses the IE print engine.  You can print from IE?  There was an earlier report that one could not print Windows mail after installing IE9.  If you can print from IE, then see if uninstall IE9 (which was installed by default) fixes the problem.

    Steve

  • Trying to open Bacup and restore: "an internal error has occurred. The parameter is incorrect. (0 x 80070057) »

    When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight.

    Hello Tjohanne
    Please write to the Microsoft Forums.

    This problem can occur because of a bad sector at the end of the volume that you are trying to save.

    However, as a workaround, you can try the following methods:

    (A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D.

    Run (B). disk check to check the hard drive
    Note: Please make sure that the DVD DRIVE is the first boot device.
    1. Insert the DVD of Windows 7 and restart the computer.
    2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
    3. click on 'Next' and then click 'repair your computer '.
    4 Please, highlight 'Windows 7' and click 'next '.
    Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
    5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.

    C:
    CHKDSK /R

    Note: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
    6. Please let me know if an error is detected.

    C. now use another backup tool to check if you can back up files on the computer correctly.

    It may be useful
    Thanks and greetings
    Support Microsoft-dieng
    Visit our Microsoft answers feedback Forum and let us know what you think
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

Maybe you are looking for