200560 error during the generation of the two signals of AO

Similar Questions

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• Sync has encountered an error during the synchronization. Unknow error

  I get the following error message: 'Sync has encountered an error during the synchronization. Unknown error. Synchronize automatically retrying this action. "In addition, currently, my favorites are useless: I lost all my favorites and I can't add any new.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Try installing SAGE simply accounting error: "Error 1935. An our error during the installation of Assembly component

  Try to install simple SAGE accounting and the following error:

  "Error 1935. An our error during the installation of the Assembly {97F81AF1-0E47-DC99-A01F-C8B39A1E1873} HRESULT 0X80071A91 component. »

  After this error, I also receive this error:

  "Error: 1603 Fatal error during installation." Consult the help of Windows Installer (MSi.chm) or MSDN for more information.

  Anyone out there has any help with these errors?

  TKS!

  Hello

  1. are you able to install other programs?

  2. How are you trying to install?

   

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

  Method 2: You can also configure your computer in a clean boot state, and then try to install it.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Error during the full backup of the system Vista "Media is not UDF.

  Original title: error during the full backup of the system Vista "Media is not UDF" I tried CD - R and DVD + R

  I just finished day three re - build with all the latest updates and now I want an IMAGE backup to recover from.  When I run Backup asked that media... suggest a label for the DVD but I get the error 'Media is not UDF' end there...

  Also if I back up to another hard drive on my system can recover from this Image?

  Thank you!

  Ken D

  Hello

  backup on an external hard drive or DVD

  the 1st link below is how do the backup of the complete computer for the company, ultimate and vista business

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• 0xc007001d error during the installation of antivirus software

  0xc007001d error during the installation of antivirus software. AVG is the brand name. Installation stops with error code.

  Help!?

  I suggest that you uninstall and redownload it or switch to another brand or use the built in Microsoft Security Essentials. AVG has a bad reputation for bugginess, false positives.

• Get the error during the copy of installation section

  When you install JDeveloper (jdev_suite_121300_win64.exe) on my Windows 7 with JDK 1.7.0_70 I get the following errors during the copy of the installation:

  • oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: java.io.IOException: java.io.IOException: com.oracle.cie.common.util.crlf.CRLFException: failure to transform C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh to C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh. Could not rename the temporary file: C:\Oracle\Middleware\Oracle_Home\oui\bin\fixcrlf3284256669950451090
  • oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: java.io.IOException: java.io.IOException: com.oracle.cie.common.util.crlf.CRLFException: failure to transform C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh to C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh. Could not rename the temporary file: C:\Oracle\Middleware\Oracle_Home\oui\bin\fixcrlf3284256669950451090

  I'm on the administrator account.

  No idea why I get this error and how to fix it?

  Thank you...

  Please visit to solve the problem.

  http://rohanwalia.blogspot.SG/2015/06/unable-to-install-jdev-couldn ' t - rename.html

  Disable your antivirus and try to install.

  Thank you

• ORA-01722: invalid number calculation error during the treatment.

  My version of the APEX is Application Express 4.2.6.00.03

  I imported apex application 4.0.2 and his object of decision-making support in my apex.

  Its installed successfully.

  But when I try to run this application it show me this error:

  ORA-01722: invalid number calculation error during the treatment.

  Thank you guys for your help.

  I found the solution.

  There was a problem in the authentication scheme.

  I called function as return function_name in 4.0.2

  but in the Apex 4.2.6 to call a function word return is not necessary.

  He was throwing the error caused that Word back.

• The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

  Hi all

  We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Then I checked all the services, they are running.

  
  

  Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

  logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

  PRINTER = noprint

  mailto = applmgr

  Restart = N

  diag = N

  sleep = 30

  PMON = 4

  quesiz = 1

  Reviver is ENABLED

  CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

  Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

  Shut down the internal concurrent Manager: April 2, 2014 14:21:59

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

  error 1403 in get_responsibility_data

  Cause: get_responsibility_data

  has failed because of the ORA-01403: no data found.

  The SQL statement being executed at the time of the error was: and

  a exe

  .............................................................................

  APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  .............................................................................

  The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

  I need your help. Please suggest me.

  Thank you

  Prabhakar

  Hi all

  Thank you for your support. I solved the problem. Find the info below.

  ===================================================================================================

  Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

  Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

  After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

  Once the name of the node is changed he started creating problem in starting the application services.

  One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

  Solution: I followed these steps.

  (1) stop all services on the LAYERS of the DB and APP

  (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

  (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  (4) change the name from old host to the new host name, so find in contextfile.

  (5) start listener, then the database

  (6) listener status, it must must give service to the db instance

  (7) perform autoconfig with new contextfile (DB Tier)

  (8) perform autoconfig (pane APP)

  (9) start all services

  ======================================================================================================

  It works for me, and now the application is running. I hope that it will also work for others.

  Thank you

  Prabhakar

• Lightroom 5 does not open it gives me an error message there is an error during the reading of his preview cache and must completely

  Lightroom 5 does not open it gives me an error message there is an error during the reading of his preview cache and must completely
  He said also he will try to fix it the next time it opens, it does nothing

  Check this thread. Your previews Cache files are corrupt.

  Re: Preview cache?

• Get the error during the execution of the IOM in script integrated purge OIM_ReconArch.sh

  Get the error during the execution of the IOM in script integrated purge OIM_ReconArch.sh
  
  
  bash-3. $00 cat Err_Arch_Recon_2012_11_01_15_36_06.log
  ****
  -The execution state of archives reconciliation
  ****
  BEGIN OIM_SP_ReconArchival ("n", "n", 200000, 'ARCHIVE_SELECT_WITH_CONS_DROP_REC', 'both, '20110101',' 20111231'); END;
  
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  ORA-06512: at "PREPRD. OIM_SP_RECONARCHIVAL', line 722
  ORA-00942: table or view does not exist
  ORA-01031: insufficient privileges
  ORA-06512: at line 1
  
  
  Help, please

  ORA-06512: at "PREPRD. OIM_SP_RECONARCHIVAL', line 722
  ORA-00942: table or view does not exist
  ORA-01031: insufficient privileges

  (1) check if the OIM_SP_RECONARCHIVAL table or the view exists or not...
  (2) if it exists, check if the DEV_OIM user has enough privilege to view this table...
  Otherwise, give it all privileges to open as a sys as sysdba

  GRANT ALL PRIVILEGES ON DEV_OIM;

  COMMIT;

• Get the error during the installation of the regional coordination unit

  Hello
  I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
  Thanks in advance...
  
  2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
  Please enter the name of user and password valid
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
  Please enter the name of user and password valid
  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
  at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
  at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
  at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
  at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
  at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
  at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
  at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
  at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
  at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
  to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
  in java.awt.EventQueue$ 1.run(EventQueue.java:602)
  in java.awt.EventQueue$ 1.run(EventQueue.java:600)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
  at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  3rd error is known, one can ignore it.

  Try it with the user of the system, I thought I told you that.
  This should work.

  Score pls help if