2011 streets & trips impossible to locate addresses
I have a 2010 and 2011 trial Steets & travel. I load a file with 50 addresses in my 2010 S & T, and it finds all the 50 addresses and planning a route for me. However, when I insert these same 50 exact addresses in my 2011 S & T test it is impossible to locate 18 of them. Can you explain why this is happening? I don't want to upgrade to a new version, if she cannot locate 30% of addresses.
Hello John-413,
There is a dedicated forum just for questions about Streets and Trips and problems. It would be best to ask your question in the forum below.
http://social.Microsoft.com/forums/en-us/streetsandtrips/threads
They would be better able to solve your problem.
Thank you
Tags: Windows
Similar Questions
-
Can I switch to Streets & Trips with GPS Locator 2010 free if I already have the version of 2005?
Hi Little rebel,
To upgrade Microsoft Streets & Trips with GPS Locator 2005, you just buy the new version of the software, streets & trips 2010. Hardware (GPS Locator) is continuing to function.
Community of users of streets & trips
-
Original title: streets & trips with GPS Locator 2011 install problem
I try to install Microsoft streets & trips with GPS DVD positioner 2011 and it fails at the beginning of the installation. My environment is a workbook of Elite HP 8560w running teacher of Win 7 and Microsoft Office 2010 Professional (8 GB memory, 500 GB disk space).
I want to emphasize that I will not be plugging the GPS stick on a USB port until the installation process or the installed software requires it. The installation begins with the display:
"Microsoft streets & trips 2011 requires the installation of the Microsoft Visual C++ 2010 redistributable. To install the component now, click OK. If you want to stop the installation and exit the Setup program, click Cancel. »
I clicked on OK to proceed with the installation. Another message was displayed:
"Please wait while the Microsoft Visual C++ 2010 redistributable is installed."
After a fairly short period of time, a final message was posted:
"One of the prerequisite components failed to install. The installation program will now exist. »
I check that my list of installed programs in programs and features, and Microsoft Visual C++ 2010 is already installed, listed as:
Microsoft Visual C++ 2010 x 64 Redistributable - Version 10.0.40219
Microsoft Visual C++ 2010 x 86 Redistributable - Version 10.0.40219I tried to start the installation several times but still, he fails and ends at the same point.
What must I do to properly install Microsoft streets & trips with GPS Locator 2011?
William Allen
I thank all participants for their contributions on my problem captioned.
As I mentioned in one of my previous answers for myself, for me, this issue is now closed. Microsoft support has accepted my MS Streets & Trips w / GPS for a full refund. At least, support staff, that I spoke acknowledged that ST2011 was known to be incompatible with W7P SP1 and they offered a full refund.
A number of responses I received offered possible solutions that I had tried and has said on this subject in previous updates (for example, to run the installation of the data .msi on the installation CD). Then I still had possession of the ST2011 software, I don't was not informed of Microsoft resetting tool mentioned by Mike L. Robbins, so I can't say if that than me by my installation problems. Be it, everything is sent to Microsoft.
I can only hope that if Microsoft releases streets & trips 2012 which does not inherit problems, I lived. In my view, this thread can be closed now. Thanks to you all.
Certainly continue to reply to this topic, if others could benefit from your proposed solutions to ST2011 installed.
-
I'm a traveling salesman. I use the trip planner feature. I want to enter and save the name of the company and address to create slaes itinerary in a State or a specific city. A previous version of streets & trips were only allowed to enter and save the address, city, State or zip... I want to record the name of every company too! Is this possible with the 2011 version of Microsoft Streets and Trips? Thank you.
Hello
The question you have posted is related to Streets and Trips and would be better suited in the forum of Streets & Trips. Please visit the below mentioned link to find a community that will provide the support that you have requested. -
I can generate a list of addresses of a polygon shape in the streets & trips?
I've built a number of forms of polygon closed in Microsoft streets & trips 2011. Is there a way to generate a list of addresses contained in these forms? Thank you.
Hello
Check with streets and trips in support of the community and Forum.
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title:
Location information on the Pushpins
I have Microsoft Streets & Trips 19.00.17.3000 and when I search for an address, it creates a marker with the address in the part information of the bubble. I don't want the address to show when I have 10 or 12 Pushpins on my card, but when I only shows the name that it's hard to see them in the context of the card. I want to have the bubble with only the name, but I can not remove the address from the part of detail of the bubble. My friend has an older version of S & T, and when he sends me cards I can edit the Pushpins to delete location info. With my version, is there a setting or a work around that? It's a lot of your time to remove each pin and manually put blank benchmarks in their place.
Hello
For the best assistance would you repost kindly to Highway and street maps, Forum of MapPoint:
http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips
See you soon.
-
Original title: Registry loading problem streets & trips
I bought the MicroSoft Streets & Trips with GPS 2011 disc. After the loading and activation, I get the message "your registry settings for this application were not correctly copied. I uninstalled and reinstalled 3 times. I even thought that it might be a computer problem, so I bought a new computer, but same result. Should I simply a damaged drive? What is my solution? Russ B, Mt Laurel NJ.
Hello
1. where did you buy the disc?
I suggest you to send your request in the below link.
Support for Microsoft Streets & Trips: http://social.Microsoft.com/forums/en-us/streetsandtrips/threads
Reference: http://www.Microsoft.com/streets/en-us/community-and-news.aspx
Hope this information is useful.
-
I have Windows XP. I am trying to download Microsoft Streets & Trips 2009 / with GPS Locator. A notice appears stating (format not supported). Help, please.
Hello
Check with the streets and the support of the TRIPS Agreement.
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxpStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I down loaded the iternet 2011, I have not a dvd drive only a cd drive. I can run 2011, but cannot save it, I have to keep my old 2002 streets & trips disc in the cd drive.
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.
MapPoint or Streets & Trips does not respond or gives an error message on the license when you try to start the program
http://support.Microsoft.com/kb/951632
Note:
Ignore the error message, the link above applies to issues through a license.
See also:
Support for MapPoint, streets & trips and Highway
-
I just bought streets & trips 2010 (10/02/2011) and now there is a 2011 version. Is there time for a free upgrade?
As I understand it, there is no option available for the streets and trips 2011 upgrade.
If you are interested in the 2011 version you can buy a new copy, which is now on sale, just for 24.95
-
To improve the streets & trips 2008 to 2010 and use GPS Locator
Original title: I streets and trips 2008 + GPS Locator. Can I upgrade to 2010 and continue to use the GPS Locator even connected to the USB port?
I streets and trips 2008 + GPS Locator. Can I upgrade to 2010 and continue to use the GPS Locator even connected to the USB port?It is the instance of Vista installation.
http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips
Discussions in Streets and Trips
Try the discussion above for your question.
See you soon.
Mick Murphy - Microsoft partner
-
How can I update the maps in Microsoft streets & trips 2011
Can I update all my cards from a previous version of microsoft Streets & trips, the latest version at a glance. We recorded 2000 cards.
Hi berglandtransport,I recommend you post your request in the streets and the travel Forum for assistance on this issue. -
import of old routes in existing streets &; trips 2011
is it possible to import saved cards other trips, I took (so I can tell which roads, I took I stopped in places)
Hello
You must contact Streets and Trips for better assistance.
Support for MapPoint, streets & trips and Highway
Hope this information helps.
-
Impossible to reinstall streets & trips 2013 after having updated the Pro Surface
In the pursuit of another problem reported to the Community ( http://answers.microsoft.com/en-us/surface/forum/surfpro-surfhardware/trackpad-stops-working-shift-key-fixes-it/9c7cb363-bdc4-40c3-8fbb-48121f6d0415 ) I "refreshed" my Surface Pro (i.e. made an OS reinstall without wipe all user state).
Since the update removes all traditional Windows applications, I reinstalled those applications after the update. Unfortunately, streets & trips 2013 "installed", but the resulting program fails when booting with the message «error initializing license has occurred, 0xC004D301.»
None of the remedies for this condition suggested worked for me. It is time "all delete and reinstall Windows.
Except if anyone in this community can provide a way to solve the streets & trips license initialization problem, I suggest that anyone running streets should uninstall it before proceeding with a "refresh". This seems quite likely to avoid this problem.
Hi Mark,
Since you are facing problems to reinstall streets & trips 2013, you can view the query in the streets and travel Forum for assistance.
Streets & trips 2013 details download installation problems
Let us know if you need help with Windows related issues. We will be happy to help you.
-
I used the streets & trips for many years now for planning routes and with my GPS for confirmation of the location. I use a laptop computer in the car. I like the big screen. The laptop is awkward and heavy to travel. I want to buy a Tablet that uses streets & trips and my GPS. Which are compatible? I hope that my 2011 upgrade includes the use on a terminal.
Hello
Check with the streets and the support of the TRIPS Agreement and ask in the forum.
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxpStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851If you consider special Tablet do not forget to check with his support and ask for their
Forums (if any) about known issues that may affect the use you want.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
calendar events are not a to do list on my imac
Calendar of events do not appear to make the list on the page of the calendar on my imac. He used to do this on my pc. When you enter anan event, it shows on the calendar, but you will need to enter it again if you want to appear on the to do list.
-
7.0 Firefox opened with an unknown and indecipherable language.
After you download 7.0, Windows boxes for the installation initially revealed nothing but the small boxes on the entire area. I clicked on what I knew, it was the 'install' box which has been marked in a language or symbols I could understand not (ba
-
Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.
-
Bluetooth works for music, but not call
When I pair my Xperia M2 with my PLT_BBTGO, even if the two Audio phone and Audio media is checked, the audio media doesn't seem working. I tried to place a call while my bluetooth has been matched and it worked only through the phone itself, instea
-
Hey my HP Pavilion 1373ea g6 there bluetooth if so how do I turn it on to use
my HP Pavilion 1373ea g6 has bluetooth if so how do I turn it on. If it helps I have a laptop Windows 7 64 bit