2012 R2 server hangs randomly - Dump shows "probably caused by: ntkrnlmp.exe.

Similar Questions

• Unexpected stops, probably caused by ntkrnlmp

  My office will stop whenever he tries to sleep.  This is the analysis of error checking:

  Microsoft (R) Windows debug 6.2.9200.16384 AMD64 Version

  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\091612-16770-01.dmp]

  The mini kernel dump file: only registers and the trace of the stack are available

  DbsSplayTreeRangeMap::Add: ignoring size zero range to? 00000000 00000000'?

  DbsSplayTreeRangeMap::Add: ignoring size zero range to? 00000000 00000000'?

  DbsSplayTreeRangeMap::Add: ignoring size zero range to? 00000000 00000000'?

  DbsSplayTreeRangeMap::Add: ignoring size zero range to? 00000000 00000000'?

  DbsSplayTreeRangeMap::Add: ignoring size zero range to the? fffff8a0'01e9b022?

  DbsSplayTreeRangeMap::Add: ignoring size zero range to the? fffff8a0'00216902?

  DbsSplayTreeRangeMap::Add: ignoring size zero range to the? fffff800'00b9c500?

  Symbol search path is: srv *.

  Executable search path is: srv *.

  Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64

  Product: WinNt, suite: TerminalServer personal TerminalServer

  By: 7601.17835.amd64fre.win7sp1_gdr.120503 - 2030

  Computer name:

  Kernel base = 0xfffff800'02e63000 PsLoadedModuleList = 0xfffff800'030 has 7670

  The debugging session: Sat Sep 15 2012 17:59:07.083 (UTC - 04:00)

  System Uptime: 0 days 5:45:37.519

  Loading the kernel symbols

  ...............................................................

  ................................................................

  ...............................

  Loading user symbols

  Loading unloaded module list

  ....

  *******************************************************************************

  *                                                                             *

  * Bugcheck analysis *.

  *                                                                             *

  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  9F error checking, {3, fffffa8006d41e30, fffff80000b9c518, fffffa800dbbc9b0}

  Cannot load the image \SystemRoot\system32\DRIVERS\avfwim.sys, 0n2 error Win32

  WARNING: Unable to verify timestamp for avfwim.sys

  ERROR: Module load completed but symbols can be loaded for avfwim.sys

  WARNING: Unable to verify timestamp for win32k.sys

  ERROR: Module load completed but symbols can be loaded for win32k.sys

  Probably caused by: ntkrnlmp

  Follow-up: MachineOwner

  ---------
  I would be grateful for advice on a resolution.  I am not a technophile.

  The problem may be with the avfwim.sys, which is a driver from Avira:

  Failed to load image \SystemRoot\system32\DRIVERS\avfwim.sys, 0n2 error Win32
  * WARNING: unable to verify timestamp for avfwim.sys
   
  Try to uninstall Avira and see if the problem resolves.
   
  Consider the alternative security such as Microsoft Security Essentials software.

• Win 7 crash dump ntkrnlmp.exe

  My Sony Vaio hangs on 2 to 5 times a day. This is the dump file. I made a memory check and its all good. Any help would be appreciated

  =======================

  Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\071910-28204-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * your local folder for symbols * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7600 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16539.amd64fre.win7_gdr.100226 - 1909
  Computer name:
  Kernel base = 0xfffff800 '03402000 PsLoadedModuleList = 0xfffff800' 0363fe50
  The debugging session: 10:35:48.104 Mon 19 Jul 2010 (UTC + 12:00)
  System Uptime: 0 days 2:49:29.292
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ....................................
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 7F, {8, 80050031, 6f8, fffff8000343ae58}

  Probably caused by: ntkrnlmp.exe (nt! KiDoubleFaultAbort + b2)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  UNEXPECTED_KERNEL_MODE_TRAP (7f)
  This means an interruption occurred in kernel mode, and it's a trick of nature
  that the kernel is not allowed to have/catch (bound trap) or that
  is always instant death (double fault).  The first digit of the
  bugcheck params is the number of the trap (8 = double fault, etc.)
  Consult an Intel x 86 family manual to learn more about what these
  traps are. Here's a * part * of these codes:
  If kv shows a taskGate
  Use .tss on the part before the sign colon, then kv.
  Otherwise, if kv shows a trapframe
  use .trap on that value
  On the other
  . Trap on the appropriate frame will show where the trap was taken
  (on x 86, this will be the ebp that goes with the procedure KiTrap)
  Endif
  Ko poster then the battery has been corrected.
  Arguments:
  Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
  Arg2: 0000000080050031
  Arg3: 00000000000006f8
  Arg4: fffff8000343ae58

  Debugging information:
  ------------------

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 2

  LAST_CONTROL_TRANSFER: from fffff80003471b69 to fffff80003472600

  STACK_TEXT:
  fffff880 '009eece8 fffff800' 03471b 69: 00000000' 0000007f 00000000'00000008 00000000'80050031 00000000' 000006f8: nt! KeBugCheckEx
  fffff880'009eecf0 fffff800'03470032: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '009eee30 fffff800' 0343ae58: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDoubleFaultAbort + 0xb2
  fffff880 '02d15ce0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! SeAccessCheckFromState + 0 x 58

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiDoubleFaultAbort + b2
  fffff800'03470032 90 nop

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiDoubleFaultAbort + b2

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb

  FAILURE_BUCKET_ID: X64_0x7f_8_nt! KiDoubleFaultAbort + b2

  BUCKET_ID: X64_0x7f_8_nt! KiDoubleFaultAbort + b2

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  UNEXPECTED_KERNEL_MODE_TRAP (7f)
  This means an interruption occurred in kernel mode, and it's a trick of nature
  that the kernel is not allowed to have/catch (bound trap) or that
  is always instant death (double fault).  The first digit of the
  bugcheck params is the number of the trap (8 = double fault, etc.)
  Consult an Intel x 86 family manual to learn more about what these
  traps are. Here's a * part * of these codes:
  If kv shows a taskGate
  Use .tss on the part before the sign colon, then kv.
  Otherwise, if kv shows a trapframe
  use .trap on that value
  On the other
  . Trap on the appropriate frame will show where the trap was taken
  (on x 86, this will be the ebp that goes with the procedure KiTrap)
  Endif
  Ko poster then the battery has been corrected.
  Arguments:
  Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
  Arg2: 0000000080050031
  Arg3: 00000000000006f8
  Arg4: fffff8000343ae58

  Debugging information:
  ------------------

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 2

  LAST_CONTROL_TRANSFER: from fffff80003471b69 to fffff80003472600

  STACK_TEXT:
  fffff880 '009eece8 fffff800' 03471b 69: 00000000' 0000007f 00000000'00000008 00000000'80050031 00000000' 000006f8: nt! KeBugCheckEx
  fffff880'009eecf0 fffff800'03470032: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '009eee30 fffff800' 0343ae58: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDoubleFaultAbort + 0xb2
  fffff880 '02d15ce0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! SeAccessCheckFromState + 0 x 58

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiDoubleFaultAbort + b2
  fffff800'03470032 90 nop

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiDoubleFaultAbort + b2

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb

  FAILURE_BUCKET_ID: X64_0x7f_8_nt! KiDoubleFaultAbort + b2

  BUCKET_ID: X64_0x7f_8_nt! KiDoubleFaultAbort + b2

  Follow-up: MachineOwner
  ---------

  1: kd > lmvm nt
  start end module name
  fffff800 ' 03402000 fffff800' 039de000 nt (PDB symbols) your local folder for symbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb
  Loaded symbol image file: ntkrnlmp.exe
  Mapped memory image file: your local folder for symbols\ntoskrnl.exe\4B88CFEB5dc000\ntoskrnl.exe
  Image path: ntkrnlmp.exe
  Image name: ntkrnlmp.exe
  Timestamp: Sat Feb 27 20:55:23 2010 (4B88CFEB)
  CheckSum: 00545094
  ImageSize: 005DC000
  File version: 6.1.7600.16539
  Product version: 6.1.7600.16539
  Flags of the file: 0 (mask 3F)
  Folder OS: 40004 NT Win32
  File type: App 1.0
  File date: 00000000.00000000
  Translations: 0409.04b0
  CompanyName: Microsoft Corporation
  ProductName: Microsoft® Windows® Operating System
  InternalName: ntkrnlmp.exe
  OriginalFilename: ntkrnlmp.exe
  ProductVersion: 6.1.7600.16539
  FileVersion: 6.1.7600.16539 (win7_gdr.100226 - 1909)
  FileDescription: NT kernel & system
  LegalCopyright: © Microsoft Corporation. All rights reserved.

  UNEXPECTED_KERNEL_MODE_TRAP (BugCheck 7F) stop error is probably related to ZoneAlarm as in the following thread:

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/e94de527-183F-4227-9749-072ba0e7769f

  You can try to disable NetBIOS over TCP/IP or uninstall ZoneAlarm and see if the BSOD solve.

  As an alternative to turning off NetBIOS over TCP/IP or uninstall ZoneAlarm, you could try the following fix:

  http://support.Microsoft.com/kb/981180/en-us

  There is a link at the top of the article to request the hotfix.

• Windows 8 Blue error screen dump ntkrnlmp.exe

  Hello.

  I get a blue screen error whenever I start up my laptop, and then it restarts automatically.

  This is the dump file.

  Any help would be greatly appreciated.

  Thank you.

  The dump file is as follows:

  Microsoft (R) Windows debug 6.2.9200.20512 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\MEMORY. DMP]
  The Bitmap core dump file: the single kernel address space is available

  Symbol search path is: srv * c:\cache* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff803'3361 b 000 PsLoadedModuleList = 0xfffff803'338e7aa0
  The debugging session: 08:37:08.266 Mar 5 August 2014 (UTC + 02:00)
  System Uptime: 0 days 7:44:31.323
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .....................
  Loading user symbols

  Loading unloaded module list
  .......................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 7 a, {fffff6fc400bb600, ffffffffc00000c0, 16cd4cbe0, fffff880176c0000}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 24e14)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: fffff6fc400bb600, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc00000c0, error state (state code of e/s normally)
  Arg3: 000000016cd4cbe0, the current process (virtual address for the lock type 3 or PTE)
  Arg4: fffff880176c0000, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

  Debugging information:
  ------------------

  Error_code: (NTSTATUS) 0xc00000c0 - El device exists.

  BUGCHECK_STR: 0x7a_c00000c0

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff803337301b6 to fffff80333675440

  STACK_TEXT:
  fffff880 '02d786e8 fffff803' 337301b 6: 0000007 a 00000000' fffff6fc '400bb600 ffffffff' c00000c0 00000001' 6cd4cbe0: nt! KeBugCheckEx
  "fffff880 '02d786f0 fffff803' 336f1bb7: 00000000'00000002 fffff880 ' 02 d 78850 fffff803" 3396ca 80 fffff880'02 d 78840: nt! : FNODOBFM: 'string' + 0x24e14
  fffff880 '02d787d0 fffff803' 336afdef: fffffa80'06fb0040 fffff803 '3396ca 80 00000000' c0033333 fffffa80' 06fb0140: nt! MiIssueHardFault + 0x1b7
  fffff880 '02d788a0 fffff803' 33650f22: 00000000 00000001' fffffa80 '07621b 00 00000000 00000000' fffffa80' 07621b 02: nt! MmAccessFault + 0x81f
  fffff880 '02d789e0 fffff803' 33655f4b: fffff803'338eed80 00000000'00000000 00000000'00000000 fffffa80'09181900: nt! MiInPageSingleKernelStack + 0x14e
  fffff880 '02d78bb0 fffff803' 33647ff5: fffffa80'06fb0040 00000000'00000000 00000000'00000000 00000000'00000000: nt! KeSwapProcessOrStack + 0xb3
  "fffff880'02d78c10 fffff803 336 CF 836: fffff803 ' 33913180 fffffa80 ' 06fb0040 fffff803 '3396 d 880 fffffa80' 070344 c 0: nt! PspSystemThreadStartup + 0 x 59
  fffff880'02d78c60 00000000' 00000000: fffff880 '02 d 79000 fffff880' 02 d 73000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'string' + 24e14
  fffff803'337301 b 6 cc int 3

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: nt! : FNODOBFM: 'string' + 24e14

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 531d349d

  BUCKET_ID_FUNC_OFFSET: 24e14

  FAILURE_BUCKET_ID: 0x7a_c00000c0_nt! _ ?? _::FNODOBFM:_string_

  BUCKET_ID: 0x7a_c00000c0_nt! _ ?? _::FNODOBFM:_string_

  Follow-up: MachineOwner
  ---------

   We need the logfile itself (called DMP file) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

  If you use the blue screen view, which has crashed, or a similar application, don't.  They are wrong at least as often they are correct

• Server 2012 - storage server repair file error volume system

  Hey guys,.

  I'm up late panic hoping someone might have an answer.

  We have a file server, 2012 running storage server. One of the volumes reported an error so I have planned some time tonight to perform a repair on it.

  After reading good things about 2012 chkdsk I thought it would be a quick process, however after some further reading, it seems you need to run chkdsk from the command line by specifying the option spotfix for the quickest fix.

  I stupidly he run from Server Manager by clicking with the right button on the volume and selecting the option "repair the file system error.

  It is on a volume of 5.5 to data that is accessed by a large number of users that will start to connect to 6 hours time.

  Managed server showed the repair had obtained 13% after about an hour, but has not changed for some time, so I guess that Server Manager had frozen, so I closed and opened again. I can see the process is still ongoing, but the Server Manager no longer shows a progress bar (just a red bar to show the volume is locked.

  Anyone has an idea how I can get up again the progress bar, or know any way to show the status of the repair running?

  Thank you

  Dave

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Qosmio X 300 hangs randomly during video games

  I have a problem with my laptop. It hangs randomly during the search on the internet or video games or movies...
  When he arrives, the screen goes black and the freezing of the sound.
  I brought to the interview, but the components seems fine. I don't know what to do.

  Hello

  You should try to use the Toshiba graphics card driver as its use on the drivers from 3rd-party pages could lead to highest GPU temperature that would cause problems.
  Additional try update BIOS if newer version is available.

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Upgrade my Server 2008 r2 Foundation for 2012 r2 Server standard

  Hello world

  Need to know the extra cost to upgrade my Server 2008 r2 Foundation for standard 2012 r2 server.

  How do I do this?

  Thank you

  Prakash Sarkar

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• problem with a 2012 opc Server

  I use LabVIEW 2010. I installed OPC Server 2012. Configure DCOM. Create tags OPC Server

  

  Create the project and create opc client

  

  But I don't see the tags in the variables:

  

  Can someone help me, I don't see why tags?

  What is under the OPC2 folder?

  Also, I checked my 2012 OPC Server readme (start > all programs > National Instruments > 2012 an OPC Server > Readme) and he said:

  "You can use the OPC servers OR with the following software applications:

  • LabVIEW 2011 SP1 full or Professional Development System
  • LabVIEW DSC Module 2011 SP1"

  This may mean that it is not compatible with your version of LabVIEW.

• Can I use ASM / ME to windows server 2012 file server failover clustering?

  Hi all

  Can I use ASM / ME to windows server 2012 file server failover clustering?

  We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.

  Thank you.

  HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference.  But HITTING / will allow ME to create the active copies and replicas of volumes CSV

  Yes the cluster file shares are supported with SUCCESS / me.    If you think about it, SQL, Exchange are indeed a "sharing".   Because it is an NTFS volume with services that run against her.  SQL, Exchange or fileshare services.

• compatibility of Windows 7 Home Premium with Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012.

  Hi, I'm going to buy a new laptop in which I get Windows 7 Home Premium. I'm going to use MS Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012. I'll use the other tools of development also. I just want to know fact these races of software in this operating system.

  It's the operating system have a compatibility issue with these software or other tools of development.

  Best place to look is the MS site for these products and consider the requirements specified

• 2012 Downgrade Server license

  Hi, I found out recently that I was managing fault of the vm windows server licenses.  So im trying to get a better understanding of things

  I think I have a better grip of things except for server how things 2008 2012 decommissioning effects.

  To give an example, I have a project for a client entry, it is a small project of vmware

  The plan is to have 2 physical server running vmware eseentials more.

  They will need 4 2012 Windows server Vm and Windows 2008 32-bit Vm 2

  I want to be able to vmotion servers if you need from one to the other, so I will need licenses windows on both servers.

  So I figure I will need 3 Standard Windows 2012 per physical server so 6 total licenses

  Windows 2012 Standard license gives you the ability to have 2 vm.  When I go down one of the licenses for 2008 server, im assuming im may 2 2008 Vm for a license, is - that correct?

  Or he return to the old 2008 license where you where only allowed 1 2008 vm by standard license?

  Thank you

  Mike

  MS license is not very easy, but should help the following guides:

  Microsoft license Windows Server 2012 for use with Virtualization Technologies

  http://download.Microsoft.com/download/4/D/B/4DB352D1-C610-466A-9AAF-EEF4F4CFFF27/WS2012_Licensing-Pricing_FAQ.PDF

  Q15 should answer your question about the downgrade rights.

  The ability to execute downgrade bits do not change licensing or support the terms in which you use the product; rights of the purchased product (Windows Server 2012) will apply. ...

  André

• Photoshop CC hang randomly when using any type of brush. (Please HELP!)

  Photoshop CC hang randomly when using any type of brush. I use Mac OS Mavericks and lates of Photoshop CC version, the only way to make it work is to switch to another application, and vice versa, but sometimes this does not work and I lose all information.

  I tried to reinstall several times Maverick and Photoshop, but it does not help.

  Does anyone have the same problem?

  Hello

  We believe that we have found a fix for this problem. Please see the 'Correct' (#348) post in this thread about where to take the plug-in:

  http://forums.Adobe.com/thread/1012373

  Kind regards

  Steve

• Why export dump shows at least that the actual size?

  Why export dump shows at least that the actual size?

  A large number of parameters must be taken into account. For example, for an empty table, only the DOF will be exported even if the segments are re-created when import. I'm not sure of what you are looking for and why, but a size of dump export has a little to do with the occupation of segments.
  I suggest you read the note * overview of original export and import utilities [61949.1 ID] * +, it is well explained.

  Nicolas.