2012 Server ESXi 5.1 does not not on NFS

Similar Questions

• Windows Multipoint Server 2011, several stations does not.

  WINDOWS MULTIPOINT SERVER 2011, SEVERAL STATIONS DOES NOT

  I USE WINDOWS MULTIPOINT SERVER 2011, TWO STATIONS OR MORE ARE NOT ABLE TO IMPLEMENT.

  I INSTALLED 20 CAL DEVICE

  HOW TO INSTALL SEVERAL STATIONS? ANY OTHER LICENSE, I NEED AGAIN?

  Help me. .

  CONTACT ME: * address email is removed from the privacy *

  Hello

  Because the problem is with Windows Multipoint Server, I recommend you post this question in the Forums of Windows Server.

• Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist?

  Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist? help someone?

  If it is hosted by GoDaddy, it's maybe out of service. There is a DDoS (denial of Service) attack to GoDaddy for the moment.

  You could try again later and see if it returns.

• Adobe Server 32 QT is does not in first CC

  Hello

  My Adobe QT 32 server is first CC does not respond when I export.

  Export then takes forever and the CPU goes to about 99%.

  Is it in first CC and Media Encoder CC

  Anyone with a solusion?

  I run OSX 10.9 and have first CC 7.1.0 (141)

  6-core Intel Xeon 3.33 GHz

  16 GB 1333 MHz DDR3

  Concerning

  Thomas

  Hey,.

  I reinstallet all my programes from Adobe and the problem is now gone :-)

  Concerning

  Thomas

• In 2012 LV > > help > > find examples does not

  I observed problem with 'Find example' does not work in 2012 LV. Everybody is watching the same question.

  Puneet salvation,

  Thanks for posting. It seems that there is a problem with your system Web server of NOR. System OR web server is a service that launches startup which opens the TCP/IP ports to communicate with other applications of NOR, namely the NI LabVIEW example Finder. If LabVIEW can not start NEITHER System Web Server, you can also have problems with other programs OR associated with LabVIEW measurement and Automation Explorer.

  To check if you can start the click OR Web Service system on start > run... then type "services.msc". Here scroll NI System Web Server, right click and select 'start '.

  If she has already begun to try to restart it.

  If it does not try to disable the Windows Firewall and restart the Web server in the system EITHER.

  Fault, this issue has been know to occur after a repair of software, if that is the case, you may need to re - fix your software to re-record. Additional information on this in this forum thread.

  Some useful knowledge base articles:

  http://digital.NI.com/public.nsf/allkb/BB4F052E48D9476186256FFD0067A992

  http://digital.NI.com/public.nsf/allkb/2AF18FBF04D29104862578D8004E4A6B?OpenDocument

  I hope this helps.

  Paul O'Neill

  Technical sales engineer

  OR UK

• HyperV 2012 SMV "off the power" does not appear in the converter 6.1.1

  Hello

  Environment:

  HyperV 2012

  VMware Converter 6.1.1

  VMware 5.5

  I want to convert all Hyper-V in VMware virtual machines

  A virtual machine worked without any problems! Power off of the virtual machine and do normal "conversion process" - all right, but all the other VMS does not appear in the converter as soon as they are "off".

  I start VMware Converter

  -Convert the Machine

  -Source HyperV - Server (Powered off)

  that shows me all the virtual machines on the Hyper-V environment. As soon as I turned off one of the virtual machines that VM is endangered. I see not the virtual machine until I have restart the virtual machine.

  All ideas

  Thank you.

  Hello

  so, finally I had to delete all virtual machines to Cluster Hyper-V role, restart the converter on the Hyper-v host Agent, and then everything went well.

  Thanks for your help!

• ESXi 3.5 does not not in the CR

  Hello

  I have 2 servers esxi 3.5. 1 is fine but the other is States that it does not. I can access the server through putty and I'm on the colse. Also all the VMs on this machine work properly because I can access each virtual machine via rdp.

  Any ideas?

  Thank you

  Don't hurt your VM.

• e-mail account working do not mistake the e-mail server for this account does not

  One of my Gmail account does not not via Thunderbird. He worked for until our days. Get them an error message saying
  "The current operation on the Inbox doesn't have to succeed. The e-mail server of the account... responded: unknown command 34
  the e-mail server for this account in not responding do not, the unknown command...)

  I delete this email account and re-created with the same problem. The unknown command is different everytime I try to get new messages...

  See if that helps.
  https://productforums.Google.com/Forum/#! subject/gmail/KB-HRs8VGsg

  In any case, it looks more like a problem of Google, so you can also ask in a forum of Google.

• In 2012 LabVIEW MathScript RT module does not work

  Hi all

  I recently installed LabVIEW 2012 in my PC with Windows 7. However, Mathscript does not at all. It says "an internal error has occurred in the MathScript RT Module.  Restart LabVIEW and try again.  If the error persists, reinstall the MathScript RT Module. "I did it, but still does not work. It is said further than Mathscript is missing or not installed", but I have installed. What the problem would be, please?

  Have you been able to verify the installation and activation in the License Manager OR? It should say enabled for this computer and have a green square like this:

  

• Recently upgraded Windows 2000 server to 2008 which does not support Netbeui. I am trying to install TCP/IP on the BACK box, but can't find a 16-bit version.

  I have an old DOS box running MS add-on workgroup 3.11. It worked Netbeui for years connecting to a W2K Server with no problems. We have recently updated our server to a new server Win 2008 who now does not support Netbeui. I try to install TCP/IP on the BACK box but have had no luck finding the 16-bit version of the tcp protocol. I can succesfully add battery of 32 bits, but the network card doesn't.
   
  Has anyone seen this problem before?
  original title: network BACK issues

  Hello, Steve Pollere,.

  The question you have posted here is related to Windows Server 2003 and would be better suited on the TechNet support forum. I suggest you post your question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• spool server says error signature does not work, can't restart, can't reload printers, missing icon

  Personal computer running Windows XP with two printers, HP Laser jet 1020 and Lexmark X 2250 works very well yesterday. Today, print jobs are back with the error signature telling me that my spool server does not work.  I went and tried to restart my spooler, no go.  Icons for missing print/fax printers program and I can not reinstall the printers.  Same message arrives, spool server does not.  How can I fix it.  I ran the difficulty it program, produced works and still nothing.  Help please!

  Hi Wendy,.

  It comes down at the end of the previous instructoins, so it of nothing to do but to remove and reinstall the printer, then follow these instructions to do this:

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Let us know.

  Best regards

  Matthew_Ha

• "" DNS server to error message "does not.

  Original title: has no Internet connection

  I had used my nokia phone as a modem with success for a few days. Subsequently, rather than connecting, I started getting a message saying that the DNS server does not. When I put in a different SIM from the same phone company, I am connected. Help, please.

  Hello Stephen,

  We get the DNS server does not no error for the following reasons

  a: The server that hosts the site may be temporarily down for technical reasons

  b: The DNS service in your computer is damaged or does not

  c: Firewall security or security software itself could have inadvertently blocked your PC to communicate with a Web site or some Web sites

  Clearing the cache of DNS (domain name system), forces DNS to query a DNS server rather than using the information stored in the cache. You can clear the DNS cache on changes to the websites that you manage, or if you receive repeated errors when you know that you type an address is correct.

  Empty the DNS and check if it helps to rectify the problem.

  a: Click the Start button

  b: In the search box, type command prompt.

  c: In the list of results, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d: At the command prompt, type ipconfig/flushdns hit then enter.

  Answer please if you have any questions.

• Server behavior select list does not

  I was finally able to find my CC Dreamweaver server behaviors after losing nearly 2 weeks of productivity. Adobe really dropped the ball on the removal of this widely used feature. In any case, now that I have this feature back all my work server behavior EXCEPT my behavior select dynamic list that has worked very well in Dreamweaver CS5.5. Everything I do is a client code of reading a table customers in a MySQL database and using this code to a code from the customer table to display all the codes/descriptions, highlighting what is the code for the current customer. On this update form the user can then select a new code that will update the customer record in the customer table. It's pretty simple and I know how do it. However, it does not work in Dreamweaver CC. The only difference in my CS5.5 version and the new version of CC, it is that I do my sensitive site, <! doctype html >, bootstrap.css and www.w3schools.com/lib/w3.css. That none should make a difference. All my other server (text, radio button) behavior work fine in Dreamweaver CC. HELP!

  The server behaviors have been removed for a good reason. Does not work the code they generate in PHP 7, which is scheduled to be released next week. Or it will work in many sites running PHP 5.5 or 5.6 because some hosts have disabled the original functions of mysql in PHP.

  You can make a strong argument for Adobe update server behaviors to work with MySQLi or PDO (a lot of people already have), but you are living on borrowed time if you continue to rely on the old server behaviors. Even if Adobe has created versions updates tomorrow, server behaviors, you will still need to recode all of your pages because the code in the server behaviors cannot be easily replaced.

• New download of vCenter Server Appliance 5.5 does not work?

  I have a client with a small two servers ESX environment into a cluster HA (5.1.0, 799733).  Recently, the 5.1 device they used for management began to have problems and rather than try to solve this problem the plan was to download the new device of 5.5 and just migrate to this.

  A few months ago, I downloaded the device (5.5.0.5100 - 1312297) and deployed.  The deployment takes place without incident, and he fired an IP address from the DHCP server.  However attempts to connect to this device via the web client or the vSphere client failed.  I could connect to the console and it showed started lighttpd but I couldn't always connect.  Play with it, I finally got the web connection works however SSL wouldn't connect to the machine.  After a lot of hacking on I disabled the SSL requirement and could not enter the web management, but by this point I had broken a number of things and was not confident in this system.

  Other questions came, and it has put on hold for a while.  Now, I try again.  I downloaded and deployed a clean machine (5.5.0.5101 - 1398493).  I have deployed it no problem and he pulled a DHCP address, but even when I can't connect to the web server on port 5480.  A glance at the lighttpd configuration file says it's the right port.  Before you start to play and probably break things again once someone has ideas what I might be missing that a device out-of-the-box does not load?

  -Kurt Montgomery

  All comments are my own and do not reflect the views of my employer or clients.

  Cool, and it is not something like a proxy in place? What browser are you trying? Using another browser help?

• Visual Studio 2012 and VMWare workstation plugin does not work

  Today we moved to Visual Studio 2010 Visual Studio 2012 in our project.

  After installing VS2012, I installed VMWare workstation 9. To my surprise, it did not appear any menu in Visual Studio VMware. In the previous version, the menu item will automatically appear by the installation of VMWare. We use the VMWare plugin to debug Visual Studio applications on the virtual machine remotely.

  Does VMWare workstation 9.0 support Visual studio plugin for VS2012?

  My version of VMWare is 9.0.0 build-812388 and my version of Visual Studio is Visual Studio Premium 2012, 11.0.50727.1 RTMREL.

  The VS plugin that comes with 9 Workstation does not load in VS 2012 due to some changes in the interface COM vs.  The next update to 9 Workstation will correct this problem.