2012 Server r2 RD Web Access

Similar Questions

• Verification email of site blackBerry Smartphones that use Outlook Web Access Lite

  I just got a Blackberry 8330 and the need to use it for the electronic control of my company's e-mail server.

  It turns out that this server uses Outlook Web Access lite. I am currently not able to check the mail that I am

  get errors saying that the browser must accept cookies. Also something about scripting.

  Does anyone know how to get around this problem?

  I don't want to 'integrate' this email account and I get messages pushed to Blackberry - only to be able to

  access the site of the email and check email.

  Solutions please!

  Hi and welcome to the Forums!

  It actually maybe not a cookie issue... since I access OWA as you wish (I integrate via BIS... very slippery!), I can only guess.

  In the browser, click on the BBKey and select Options. There is a ton of different options, including one that allows your browser to BB identify on a website in IE, FF or BB... being the default, of course, BB. If you change IE, you might have more luck. This setting is located in the screen of Configuration of the browser and is usually called the browser Identification.

  There are also many other settings that may be useful... basically, you need to tinker with them until you find a combination that works for your particular situation. But I would try the browser ID/emulation first.

  See you soon!

• Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers. Help!

  Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.

  I emptied my cache.  I rebooted Firefox.  This is my email website - never had a problem before.  I am able to access it on Safari.  I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
  

  I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?

• Failed to configure remote web access in Storage Server 2008 R2 Essentials

  I am running windows storage server 2008 r2 essentials. It is my second server. The first I own and been installed without any problems. The other is having a problem setting, web access remotely via the dashboard. Everytime I try to put in place the name domain the wizard fails, and I noticed that the windows server domain name management service stops. What should I do?

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Vmware server Web Access 2 does not work

  Dear vmware community:

  First of all thank you for taking the time to read this.

  I have a problem that looks like this isn't the first time that this happens, Yes, I was still unable to find an adequate solution.

  We have vmware server 2 is installed on a Debian 5 machine. Until yesterday, it was working fine.

  Today, when I tried to access to via web browser as usual, the page not load (the browser would say 'done, but the name of the page says "Loading").

  We have one of the virtual machines that are configured to start automatically, and it does not work as expected. The other I can't handle because I can't have the vmrun run perhaps (related?). So far, the only things that doesn't seem to work is web access only.

  There is one thing to note: after a restart of the computer, or restart the vmware mgmt, the service called "VMware Virtual Infrastructure Web Access" would show anything (while other services say "done" at the end of each line).

  I saw other people with similar problems here, and generally the solution was to reinstall the vmware server all on this machine. I would avoid this of course.

  Did someone already experienced this? Where I can look for more information on the VMware VI Web Access service won't start not (I do not know where are stored the logs of this service, maybe that can help).

  Please let me know if I should add any information, such as newspapers, etc.

  Thank you in advance!

  Hello

  I would recommend you check carefully this post and this post another may also help.

  Have you checked the vmrun documentation? Take a look at the file that I downloaded on this post.

  I would like to know if one of my tips work for you (or not)

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• VSphere from VMware vCenter Server Web Access from the Internet

  I tested VMware vSphere (ESX 4) and tried to connect to the internet for the Web Admin Access VM only.  I can connect the vCenter Server (on Windows) http Web Access features and manage the configuration of all virtual machines. But when I try to connect to an actual vm via MKS, I get an error MKS as ' unable to connect to the MKS: unable to connect to the xxx.xxx.xxx.xxx:902 server.»  The xxx.xxx.xxx.xxx is the IP address of the ESX Server HOST and not the Server vCenter (which administers the host).   I have ports 80, 443, 902 and 903, on the firewall, open to point to the server vCenter Server.  When I'm on the LAN, I can do everything without a problem. Its only when I try to connect directly from the internet through our firewall I get the above error.

  Someone at - it suggestions?

  Andrej770,

  vCenter Server transfers you to the ESX host hosting the virtual machine, and the remote console runs on port 902.

  You want to go directly to the ESX host on port 902 through the firewall to connect to the Virtual Machine console.

  You want to see the pages "Guide de Configuration ESX" 146 for more information.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_esx_server_config.PDF

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• Safari cannot find server Outlook can ' t access my e-mail?

  Safari cannot find server Outlook can ' t access my e-mail?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

  I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

  (1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

  (2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

• Acceptance of the wrong calendar calendar .ics in get Outlook Web Access requests.

  I run Vista w/Outlook 2007 for my personal e-mail.  I also Outlook Web Access runs hung in an Exchange Enterprise Server.  When I accept calendar entries on OWA that has an .ics attachment, the calendar entry is placed on my personal calendar instead of the company.  This only happens with .ics attachments.  Is there a solution?

  Not really.  The type of attachment is associated witt Outlook. When the downloaded file, that the attachment is opened Outlook, OWA use it. OWA may only face exchange meetings, generated by a user on the same server. He cannot deal with appointments of attachment style. It might be useful to ask the administrator to the Exchange Server if Exchange has been configured for Outlook Anywhere (RPC over HTTP). If so, they should be able to configure Outlook 2007 to access.

  HAL

  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Best practices to configure NLB for Secure Gateway and Web access

  Hi team,

  I'm vworksapce the facility and looking for guidance on best practices on NLB with webaccess and secure gateway. My hosted environment is Hyper-v 2012R2

  My first request is it must be configure NLB, firstly that the role of set up or vice versa.

  do we not have any document of best practice to configure NLB with 2 node web access server.

  Hello

  This video series has been created for 7.5 and 2008r2 but must still be valid for what you are doing today:

  https://support.software.Dell.com/vWorkspace/KB/87780

  Thank you, Andrew.

• work around the internal security gateway and the same url for web access external and internal

  role of the broker 1 quest
  1 security with the roles of web access gateway
  1 Server terminal server

  I configured the default gateway with the parameter security rule: "vworkspace security gateway".
  I created a custom with the 172.16.1.177 value rule (it's my client internal windows7).
  When I navigate to the internal url (fqdn's secure gateway server) I bypassed (tsdebug shows no sslgateway).

  But now I want to use 1 internal and external URL to type the same URL.
  Now when I navigate to an external URL of the machine internal with above ip I always get through security gateway, I see a SSLGateway

  Hi Erik,

  I think that this has been fixed in our latest version 8.5 - documents.software.dell.com/DOC252107

  Please download and upgrade your farm and let us know if you still see this problem.

  If you do, it may be best to save a service request so that we can see exactly what is happening.

  Thanks, Sam

• Configure Outlook Web Access in Windows Live Mail

  Is is possible to implement the https://mail.server.edu (where server is the name of my employer) in Windows Live Mail so I don't have to keep connected to the school server over and over again to see if I have mail?

  Thank you! Their computer scientists do not know what I mean. :)

  Debbie Debbie Soll

  Hi Debbie,.

  Welcome to the Microsoft Answers site!

  Try it out below mentioned steps and check if that helps you accomplish what you want.

  1. start Windows Live Mail. A wizard may run the first time it is opened. If the wizard does not work when you open the program, do the following:

  a. on the Tools menu, click accounts.

  b. page accounts , click Add.

  c. on the Add an account page, click e-mail accountand then click Next.

  2. on the Add an e-mail account page, do the following:

  a. the area e-mail address , enter your e-mail address.

  (b) in the password box, enter your password. If you want Windows Mail to remember your password, check the box next to Remember password.

  (c) in the display name box, enter your full name.

  d. Select manually configure e-mail account settingsand then click Next.

  3. on the next page of the wizard, under incoming server information, do the following:

  a. in the dropdown under incoming mail server is a Server, select IMAP or POP3. You can use the IMAP protocol because it supports more features.

  b. under incoming server, enter the name of the POP3 or IMAP4 server. If you access your e-mail account online using the outlook.com Web site, enter outlook.com for the POP or IMAP server name.

  c. Select this server requires a secure connection (SSL).

  d. under log on using, make sure that clear text authentication is selected.

  e. under (if different from the e-mail address) login ID, type your full e-mail address.

  4. under outgoing server information, do the following:

  a. under outgoing server, enter the name of the SMTP server. If you access your e-mail online account using the outlook.com Web site, you can find the SMTP server name by signing in to your e-mail account to the following address: http://outlook.com. After logging in successfully, click the drop-down arrow next to the help question mark, and then click on to words. You must enter the name of the Server SMTP is listed in the page on under external SMTP setting. For example, if the about page shows the following, your SMTP server name is pod51005.outlook.com
  External SMTP configuration:
  Server name: pod51005.outlook.com
  Port: 587
  Encryption method: TLS

  b. Select the this server requires a secure connection (SSL).

  c. Select the check box next to out of my server requires authenticationand then click Next.

  5. on the page of your new account settings are complete , click Finish

  6. on page accounts , click close.

  7. If you are using IMAP4 and the dialog box Show/Hide IMAP folders is displayed, use the Windows Live Mail user interface to select which folders to synchronize between the server and your local computer, and then click OK.

  You can also contact the Windows Live community for assistance.

  http://windowslivehelp.com/community/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• vCenter web access do not allow me to generate shortcuts

  Hey guys,.

  This is the first time I've been watching this.
  I connect to vCenter Web Access with my credentials (I have admin rights in vcenter) and I get to see my inventory.
  Returns the right info as expected for all objects (data centers, files) but when I click on a virtual machine on the right side is empty.
  I expected to see the Summary tab, because that's where I generate my shortcuts but there nothing at all.

  Any ideas?

  
  See you soon

  Hello

  You try to access the vCenter through a vSphere client installed on the vCenter server or PC remotely?

  This problem happens on the summary only tab?

  Kind regards

• Alternative to VMware Infrastructure Web Access?

  I had absolutely horrible experience, try using the VMware Infrastructure Web Access site to manage my VMware Server 2 (2.0.0 - 2.0.2), but I spare you the rant about the problems.  In short, I expect more distributed as alpha software.

  Is there another program of VMware or someone else who will allow me to manage VMware Server and access the console of the virtual machine.  I liked the product for Server 1.x, but unfortunately, they removed support.

  Yes, he must be the customer of ESX3.5.  Specifically Virtual Infrastructure Client 2.5.  I do not know which build ESX3.5 I got the customer, but it was there are a few updates.  So, you might try the extraction of the ESX3.5u1 or u2, if the current version of u5 does not work.

  A major limitation with the VIClient is that it cannot completely handle material type 7 VMs.  (e.g.: Server2.)  You can start the virtual and other computers, but cannot change the settings of the virtual machine.  If the virtual machines are the older type 4 (e.g.: Server1) then you can make full use of the VIClient for everything.  However, the type 4 does not support USB2.  You don't have to have all your virtual machines as type 4.  My server has a mixture of types, but I have to remember which are of type 7 and use the web interface to modify the virtual machine settings.  But apart from that, I use the VIClient to display the console for all virtual machines.

  If you can live with the older hardware type, the VIClient is absolutely the best way to manage the Server2.