2013 LabVIEW allows the user to return to the LabVIEW 2012 or 2011?

Similar Questions

• Conversion of files from LabView 2012 to 2011

  Hello

  I'm new to Lab View. I'm stuck with the conversion of this file of LabView 2012 to 2011. Help is highly appreciated

  Thank you

  With respect,

  Jagadish

  double post

• How to allow the user return to give lectures when they take a quiz?

  Hello world
  
  I'm new to Captivate and now I'm kinda in a dilemma. Thank you for your
  time to look at my post!
  
  I created a CBL in Captivate 3, the first 10 slides is a conference and he
  is followed by a quiz of 10 slides, defined as standard SCORM.
  
  I want that the learner must be able to refer to the Conference when they
  Take the quiz, I tried 2 approaches and they both
  issues in different ways.
  
  Approach 1: "allow moving backwards" and "infinite attempts. The
  problem with this approach is when the learner clicks on "review the.
  quiz"and when they click"back"on the first slide of questionnaire, all
  Quiz will start everywhere, the score is reset to zero.
  Because the quiz is seeing this as a new attempt and that the learner is
  permit to make "infinite attempts" such that it has been configured.
  
  Approach 2: "Allow moving backwards" and leave only "1 attempt.
  The problem with this approach is, when the learner is in the Middle
  Quiz and refers to the Conference, the quiz will be
  automatically shown as completed. And the learner will not get a
  chance to answer these questions unanswered.
  
  It seems that every time that I leave the learner refer to the Conference
  in the middle of a quiz, the quiz will be seen as completed. Who am
  I did wrong? Is there a better approach I can "allow backward
  movement' and always allow resumes user their quiz where they have left
  in the distance?
  
  Sorry for the long post, I was not able to express it in a more
  concisely.
  
  Any help is really appreciated!
  
  -David

  What you see is the behavior designed as in Captivate for the quiz.

  Each Captivate movie has a range of "quiz", which starts with the first measurable purpose and ends at the Quiz results slide.  If you enter the scope of quiz by starting a slide of questionnaire, then jump back away from quiz, to return to the basics, default behavior of Captivate is to freeze the quiz at this time here.  Then when Captivate refers to allow movement to the rear, it is talking only a move backward in the quiz.

  For example, if you get to question 1, but no answer and proceed to question 2 answer that we can go back to question 1, you will still be able to answer question 1.  The test will not be frozen.  However, if you had jumped to any slide before question 1, your quiz would have been frozen with everything that you mark had accumulated at this time here.

  There may be a workaround that you can use to get closer to what you want.  As any object that is classified as part of the quiz, you can add a button on one of the first slides that the user must click to move forward.  Set the properties of this button (or click on the box) to report a score for the quiz.  What makes a part of the scope of quiz.  Now, any content slides falling after this slide button are also within easy reach of quiz and return to them will not have the same effect of freezing the quiz.

  Please keep in mind another aspect of the quiz questions: If you answer a quiz question, and then move off the slide (forward or back) quiz question answer is frozen and cannot be modified unless resume you the Quiz or raise all of the module.

  Hope this helps to clear up how things work.

• How can I allow the user to take a quiz in the middle of it in Captivate 7?

  Hello Captivaters,

  I want to the learner of a test until he could continue on the training of the force.  If it does not pass the test, he will have to go back and resume. "Recovery" button allows him to do this, but I really want to have 4-5 of these checkpoints 'quiz' in e-Learning - separated with presentation material - so the user proves that he understands the material before moving forward.

  This is why I would create my own button "recovery" at the end of every "checkpoint quiz" that leads the learner to the first issue of this checkpoint (not to the first issue of training).  So far, I was able to create a button that appears after it receives a correct quantity to allow him to continue, and I want to create a button that appears and brings it to the first control point question if is nott get the correct amount and return to these questions.  The first part is easy, but I also need to add the function or reassign a variable to allow the user to resume the quiz. I hope I'm making sense... Any help would be appreciated!

  -Ryan

  Your recovery button (s) will have an advanced standard action at least these two statements and in the following order:

  • Go to slide to score
  • Go to the question slide

  Jumping to the slide of score and so that there are attempts to Quiz on the left, the next attempt will be launched (you can check if you put the system variable I was talking in a text container timed for the rest of the project). Then you jump to the slide where you want the user to return to the questions.

  You may have to make it a conditional action advanced, if you want to first test the result?

  Lieve

• Followed by disconnection of back button of the browser allows the user in application

  Hello
  
  In Application Express 4.0.2.00.07 in the 300 request authentication scheme I defined the logout url to be:
  
  wwv_flow_custom_auth_std.logout? p_this_flow = & APP_ID. & p_next_flow_page_sess = & APP_ID.:101:
  
  It works very well, that is when the user application click on the logout button, he or she is redirected to the page of connection (101) if at this stage, the application user clicks the previous button on the browser, Firefox or Chrome, it is allowed in the application and may exercise as if it never of disconnection.
  
  On the other hand if this same exercise is repeated in Internet Explorer, the feature works as expected, it's that the user cannot return to the application without logging in once more.
  
  Any suggestions on why Firefox/Chrome behaves this way? suggestions in areas to look at pointers would be welcome.
  
  Thank you
  
  Daniel
  
  Published by: on May 22, 2012 zooid 04:03

  Hello

  It is always useful to search the forum first.

  You can start here {message identifier: = 1487149}

  Kind regards

• copy the select value in the textfield of LOV, and allow the user to modify

  Hello
  I have a datablock with 20 records and each record has a comment (say field_comments) fields. I would like to allow the user to choose LOV populated predefined comments (say lov_comments) and add a few additional comments after they choose the value of LOV.
  
  I created a LOV and added the return type 'field_comments' in column mapping properties. When the user clicks a button, LOV opens. They choose the value of the LOV and the value goes to the field 'field_comment '. The problem with this approach, the user cannot add their comments after selecting in LOV.
  
  I tried this too much. I created another area of non-visible text (i.e. fake). In the LOV, I added "dummy" field as returntype. In the dummy field, I created the trigger 'After the CHANGE', which basically says: block. field_comments =: block. Mannequin.
  
  But, the user must click another field to display the value selected from the LOV. The values of the 'field_comments' is not being updated as soon as the user click on the 'OK' button in the LOV.
  
  I'd appreciate if someone could give me feedback and help to solve my problem. Thank you for your help.
  
  I thank.

  Well, I tried exactly what you posted and it allowed me to SELECT from LOV, then CHANGE/ADD new text in front of returned value in the field. He recorded in the database and questioned without any problem.

  Your article is allowed to INSERT/update? If this isn't the case, then set yes "Update/Insert allowed" and attach your LOV to the element and set "post to list" No.

  You can also see if you have any validation done on WHEN-VALIDATE-ITEM trigger or after CHANGE which will fail because you change LOV populated values.

  I hope that helps!

• How to allow the user to filter the report data?

  I read a lot of entries on this topic related to interactive reports. From what I can tell, the version we are on... 3.0.1.00.08, does not have the 'classic' vs 'interactive '. So, can someone recommend the best way for me to allow the user to filter report results? Specifically, the user wants to be able to see only active records, but I also want that they want to see all documents (active and inactive).
  
  Thank you
  Kristina

  Kristina,

  You can add a list "select" to your page. Calling it something like P1_LIST and add it to your where clause as...

  select
  col1,
  col2,
  col3
  from table
  where col2 = decode (:P1_LIST, '-1', col2, :P1_LIST)
  

  You can set the LOV to auto-submit or have a 'Send' button so that your report is filtered according to the value of P1_LIST.

  Also, in the properties of your selection list, set the 'Null view' to 'Yes', 'Display Null value' to something like 'ALL' (or whatever text you want) and the "Null return value'-1 (or whatever value you have in decoding).

  I hope this helps.

  -Chris

• How to allow the extraction of pages in the preview for a PC user?

  For some time I produced PDF files in MS Word and Pages that I put together in a newsletter.  I just got a request from a subscriber asking me to allow extraction of page so that it can record the pages he'd like to keep.  It seems that he uses a PC.  First, I checked the properties of my PDF files and found that they are in fact all together for "Page Extraction: unauthorized."  I then checked Preview Help and found nothing about extraction allowing pages.  Anyone know how I can help this user of PC?

  Installing CutePDF in Windows allows Windows users extract individual pages of a PDF file. There is a free version.

• User interface to allow the arbitrary rearrangement of a table 1 d of clusters

  Hi all

  I hope I can ask this question clearly without an example of code, because I like to keep the discussion as broad as possible, so here goes:

  I have a table 1 d of the clusters.  Each element represents a configuration for a whole bunch of connected equipment, and a period of stay in this State and one chain control so that the user can name every step.  I intend to loop in the table to run a series of predefined tasks.

  I want to have a button on the front panel next to the Bay or "Reorganize" that launches a dialog box that lists the control sting of each element of the array, in the order, and allows the user to rearrange the order by click/drag the elements upwards or downwards on the list, and when the user clicks OK It rearranges the table to match the new order.

  If it wasn't clear, let me set out like this: when you change a diagram, and you want to reorganize a business structure, you can right click and select «Reorder the case...» "I want this feature for a table 1 d of the clusters.

  I have absolutely zero idea on how to budge on this.

  Thank you

  Matt

  The functionality you need is available in the list box, simply set up to enable drag / don't drop, no external control parts hanging out and move only.  Here is an example that gets the names of cluster, you expected to drag things around, then click ok, then transpose.  The structure of the event is there in case you want to move the up/down buttons.  I have a tendency to plunder these buttons icon editor.

  

• Difficulty the front Dimension of the array, but allow the user to change the size of the array

  Hello

  I know there are a few other posts on table and scroll bars but mine is a little different. I want to have the physical size of the fixed table control and allow the user to change the size of the array as required and a scroll bar if the number of elements exceeds the specified physical dimension. I wouldn't mind if, at the end of the scroll bar, the user sees an uninitialized element.

  Thank you very much

  Hello

  The problem I have with the property Num Row node is it seems to replace the scroll bar. Whenever I try to change the line number, the table automatically resizes its physical size on the front and the scroll bar has no effect.

  However, I solved the problem by taking row completely digital. I just said if the table size is > to a constant value (i.e. 3), add a scroll bar and my front panel dashboard to be a size larger than what the value of this constant is size. Once I begin to add values in sequential order and I get to the fourth value, the scroll bar is added and the scroll bar has a feature where it adds an element of null for you, so if I fill this null element I just increased the size of the table and another null element appears underneath.

  Thanks for the help

• Strange behavior of the run LabVIEW VI 2013 LabVIEW 7.1

  I'm trying to extract some data hardcoded from old code LabVIEW 7.1 and decided to write a small program in 2013 of LabVIEW. The program opens a reference to a VI 7.1, search enums and call it with reference to all combinations of enums.

  Actually quite simple, but I've noticed that something is without work, as expected. The old screws have this enum called mode (0 = Manual, 1 = Auto), who is not connected to any connector and has a value default 1 = Auto.

  In LabVIEW 7.1, everything works as expected, but when I load this 2013 LabVIEW VI and execute it, without saving the file, it executes the case of 'Manual' rather than 'Auto '. I used a probe to check the value of mode in LabVIEW 2013 and the value is 1 = Auto, but he spends with the value 0 = manual box.

  This is just a simplified version of the screw, but the behavior is absolutely the same. The VI (LabVIEW 7.1) is attached. Try to load in 2013 of LabVIEW and run it. I don't have 2014 on my PC.

  

  Screenshot of running in 7.1 and 2013

  

  Any ideas? This happens because of the strange settings on my installation of LabVIEW 2013? Can you reproduce this?

  If you have a process already for execution programmatically these VI, what happens if you add to that and make something like a Vale put on the controls programmatically prior to execution of the VI.

• INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

  I want to allow the user to specify a curve like this:

  

  Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

  My design looks like this:

  

  With the error checking that looks like this:

  My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

  I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

  If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

  Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

  Spend more time thinking before coding usually pays Big dividends!

  (Speaking of sad experience) Bob Schor

• Windows XP (SP3) refuses to allow the addition of "Network Service" as a user of the service DCOM.

  DCOM error 1016 Windows XPx32

  Several solutions, all virtually identical to this question:

  Machine default permission settings grant Local Activation permission for the application server COM with the CLSID
  {A4199E55-EBB9-49E5-AF1A-7A5408B2E206}
  the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.

  However, the error persists;  Windows XP (SP3) refuses to allow the addition of "Network Service" as a user of the service DCOM.  The question was supposed to be fixed in a service pack, patches, etc., but he persists.  This despite the change permissions to allow that user permissions in HKCR | CLSID. {"clsid :} or HKLM\Software\Classes\AppID.

  Now what?

  Hi Ronegade,

  I suggest that you follow the steps in the article mentioned below.

  The event 10016 may be logged in the system log on a computer that is running Windows XP Professional x 64

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator. I am the only user on this machine

  My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator, I'm the only user on this computer.   Help please.

  Thank you, Nicholas Cooper.

  Here you go:

  1. Right click on the installer.
  2. Click on "Run as Administrator".