2013: MacBook Pro replacement motherboard or not

Similar Questions

• Memory can be increased on a late 2013 Macbook pro of the retina?

  Memory can be increased on a late 2013 Macbook pro of the retina?

  It is welded in place and not extensible

• synchronization between the macbook pro and iphone works not

  My macbook pro and iPhone are not sync reminders or contacts. How wrong what?

  Hi cmatt3,

  I understand the reminders, and contacts are no longer sync between your iPhone and your MacBook Pro.  Here is an article I would recommend starting with this problem.

  Get help using iCloud Contacts, calendars, or reminders

  Please let us know if you aren't always sync after going through this article and thank you for visiting the communities of support from Apple.

  See you soon.

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• How can I start my brand new MacBook pro, but I do not know password which someone of the store to

  How can I start my new MacBook Pro? I do not know the password for someone to the store to put it on the laptop. How can I change? I don't even connect to the laptop but I didn't even ID Apple on this topic, but I have an Apple ID on other Apple devices. Please help ASAP

  If you start the macbook does show something similar like this video? https://www.YouTube.com/watch?v=_g-3me2VTGo

  For a mac for optimum operation, you need a apple ID (to download apps and updates on the app store).

  If your mac asks you a password at startup upward, you must return it to the store you bought it and ask to remove it.

  I hope this helps!

• I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  you need a serial number for mac lr.  the serial number for pc and mac are different.

  Lightroom serial number is unique because it is cross-platform: works on PC and Mac.

  Same serial number for both.

• USB hub works on MacBook Pro mid 2012 but not on MacBook Pro early 2013

  I recently bought a Top long Premium Hub 4 ports USB 3.0 aluminum.   I noticed that when I use it in my MacBook Pro i7 2.4 GHz with 16 GB of memory at the beginning of 2013 this external zip drives are not recognized.  (It works for my iphone charging).  Then I tried in my wife MacBook Pro mid 2012 with 2.3 GHz i7 and 8 GB of memory and the external zip drives worked perfectly. Both machines have 10.11.2 el Capitan installed.

  Why it would work on an older machine?  What Miss me?

  Is the hub AC powered or powered hub (requires the MBP to power all the devices on the hub)?  Self-powered hubs use ca for the lion share of the power of the device and MBP is essentially just the conduit.

• some play some YouTube videos have I not 2013 macbook pro

  My macbook pro is up-to-date with 0sx el capitan 4gigs I'm unable to watch videos on youtube.  They just say error and not load.  YouTube said its my browser, but its update.  If this were true, then why do some play and some do not.

  I suggest you only begin by taking the measures recommended in this support article.

• Damaged screen coated end of 2013 Macbook Pro?

  MacBook Pro 15 inch model of retina end 2013 - OS X El Capitan

  The coating of the screen of my macbook covered the period I owned, just to clean it with a cloth that has come with the macbook. At first, I thought it might just be an isolated issue, but it came to my attention that several other macbook owners have suffered similar damage to the coating of the screen. I read some articles and apparently Apple have a current repair for screens.

  My Macbook is no longer under warranty because of me buy in late 2013.

  My question to all of this is; Apple will replace screens and/or coating? If not, is there a way I can fix this and prevent it from happening again?

  - Cohen

  Link to article on the replacement screens - http://www.macworld.com/article/2994479/macbook/report-apple-will-replace-retina-macbook-pro-screens-with-bad-coating.ht...

  Please contact Apple as soon as possible.

  Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• MacBook Pro FaceTime camera does not.

  Good day to all.

  First of all, I want to wish everyone a Happy Easter!

  I am having trouble with my FaceTime on my Macbook Pro retina camera (end of 2013). I have never use the camera for nothing because I use FaceTime on my iPad and iPhone, but when I open the camera and tried to use it, the green light flashes and is not solid. And photos on Photo Booth look like this:

  

  And of course, which should not happen. It is also better to say I got my screen repaired by Apple now for more than a year (24/03/15) where my anti anti-glare came out. I never tried my FaceTime camera since that because, as I say, I do not use.

  Y at - it all sorts of things to try to make it work? I tried to put on with the MagSafe in and holding D at the same time and that has not worked. Of course, I don't want to pay £282 for a new retina display just for a camera, I do not use. But also its obviously better to have everything working as it should in the first place.

  Thanks for reading and any suggestions are welcome.

  Thank you

  Mitch

  xGrimzz wrote:... I got my screen repaired by Apple now for more than a year... I've never tried my FaceTime camera since...

  On your screenshot, yours is most likely a hardware problem.  Contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired.  When the repairs are finished, this time, ask the Apple tech to show you that the camera works before paying for the work and take the Mac home.

  Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  xGrimzz wrote:... Y at - it all sorts of things to try to make it work?

  I would be surprised if your problem is correctable user because there is no serviceable parts by the user of the equipment.  However, if you wish, you can try these three additional things before seeking professional help:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  xGrimzz wrote:... I don't want to pay £282 for a new retina screen just for a camera I use... suggestions... Welcome.

  If you use not the camera, and if you experience any other problems with your Mac, it is certainly your option to use the Mac without repair.

  If you want to be able to use a webcam without spending the money for a whole new view, a compatible external webcam Mac might be a cheaper solution.  Be aware, however, that it is possible that the problem of your Mac can also prevent an external camera work.  Therefore, you might want to take your Mac with you and shop on-site.  Ask the retailer to let you try any webcam of interest to see if it will work with your MBP before buying.  If a known-working external cam will not work with your Mac, the material compensation is your only option to leave the uncorrected problem.

  Post edited by: Jim EZ

  Mac OSX 10.11.4

• is it possible that a battery for a 2012 Macbook Pro replacement could cost $400 excluding work? It seems punitive.

  Is it possible that replacing the battery in my MacBook Pro 2012 will cost me $400 excluding work? This seems downright punitive.

  Indeed, it is, but as it is not correct do need to get excited.

  It is less than $200, including labor.

• my macbook pro retina display will not download large files

  I had this problem happen to me twice before involving 1gig zipped files or files unzipped pretending to be finished in the download bar. It shows for example 309,5 309,5, the loading bar does not disappear. I try to click on it and it tells me "this son is still downloading. So I get in my downloads folder, click on the contents of opened, I look for the file and click on it like that, it gives me the possibility of reactivation of the zip folder, I do this, then it gives me an error message saying "files are not completed. (I give him hours and hours to 'finish loading' and then try again)

  Then... This has been recently. The first file I wanted to download was the Creative Design Premium Adobe (I waited half a day until the next day for this download click again on it) that is given to me directly in the downloads section of the adobe.com site. I need to reinstall the software due to an unknown error (YOSEMITE LIKELY) anyway... I start downloading, it ends - but not really. Something is happening. So I try it on Chrome, same problem. So I try it on a PC - made. No worries.

  So far I have not seen this question arise with someone else.

  The zip in question file is .7z and 335.9 MB file and the creative design premium is a 3.76 GB .dmg. I am running Safari on a

  MacBook Pro (retina, 15 inches, end of 2013)

  10.10.1 Yosemite

  MacBook Pro, Mac OS X (10.7.5)

  Start in Safe Mode, no doubt also resets of LANDAU and SMC , and then restart your computer normally.   See if the problem clears.

  If there is no anti-virus or anti-malware tools installed, any improvement in performance, of cleaning cache, optimizers any system or other such tools add-on, remove all those who, according to the instructions of the specific package.   Try the download again.

  Try downloading on a different network.   If it is a company or a network of offices, there may be filters and monitors in place, which can cause problems with the downloads.

  If all else fails, after the release of Etrecheck, and we will look to the configuration and what is installed.

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!