2014 13 "macbook pro el Captain startup problem

Similar Questions

• MacBook pro not finishing startup. I can sign in but after sign in screen grey rest

  MacBook pro not finishing startup. I can sign in but after sign in screen grey rest

  Have you tried a secure boot?

  OS X Yosemite: start in safe mode

• My MacBook Pro early 2011 startup is extremely slow

  My Macbook Pro has now become very slow in recent years to the point that it takes about 2-3 minutes at the start and another 3 minutes for the Finder to start and bar + apps become available and be able to use (otherwise fury beach ball!).

  I always held up-to-date and think that the issue could have begun with a patch somewhere that might be too heavy on such a machine in (?) "old". I don't remember not to what update started... probably just after Snow Leopard or Lion.

  I did everything advised on the web, disk check, PRAM reset, remove and free on the hard disk, the cache of the system of cleaning with Terminal... I then used EtreCheck and the result was "below average", emphasizing 17 errors on the disk. What does that mean?? Should I reinstall the OS or should I replace the HDD and redo the whole machine? If one of these, how do I go about it for this laptop, if that's possible?

  Thank you!!!

  ----------

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-02 22:47:27

  Download EtreCheck from https://etrecheck.com

  Time 08:33

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  A lot of time to start

  Finder does not appear on the start screen, takes a minute or more

  A lot of time to launch an application

  does not at the same time

  Hardware Information: ⓘ

  MacBook Pro (17 inch, early 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro8, 3

  1 2.2 GHz Intel Core i7 CPU: 4 strands

  16 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3 1333 MHz ok

  BANK 1/DIMM0

  8 GB DDR3 1333 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 54

  Video information: ⓘ

  Intel HD Graphics 3000

  Color LCD 1920 x 1200

  AMD Radeon HD 6750M - VRAM: 1024 MB

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since startup time: less than an hour

  Disc information: ⓘ

  Hitachi HTS725050A9A362 disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 398,49 (Go 51,26 free) - 17 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 100,76 GB (15.81 GB free)

  MATSHITADVD-R UJ-898)

  HGST HTS721010A9E630 disk1: (1 TB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Volumes/G G drive (disk1s2): 999,86 go-go (719,58 free)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  G-Technology G-DRIVE mobile with Thunderbolt

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  org.virtualbox.kext.VBoxDrv [no charge] (4.0.6 - 2016-03-21) [Support]

  org.virtualbox.kext.VBoxNetAdp [no charge] (4.0.6 - 2016-03-21) [Support]

  org.virtualbox.kext.VBoxNetFlt [no charge] (4.0.6 - 2016-03-21) [Support]

  org.virtualbox.kext.VBoxUSB [no charge] (4.0.6 - 2016-03-21) [Support]

  / System/Library/Extensions

  com [no charge]. Logitech.Control Center.HID Driver (3.7.0 - 10.6 SDK - 2016-03-21) [Support]

  com [no charge]. Driver Logitech.Unifying.HID (1.3.0 - 10.6 SDK - 2016-03-21) [Support]

  com.Nike.sportwatch [no charge] (1.0.0 - 2016-03-21) [Support]

  com.Wacom.kext.wacomtablet [no charge] (6.3.6 - SDK 10.8 - 2016-03-21) [Support]

  [no charge] jp.co.yamaha.driver.YamahaSteinbergUSBAudio (1.6.4f1 - 10.6 SDK - 2016-03-21) [Support]

  Startup items: ⓘ

  VirtualBox: Path: / Library/StartupItems/VirtualBox

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 160 tasks Apple

  [operation] 69 tasks Apple

  Launch system demons: ⓘ

  [loaded] 43 tasks Apple

  [loading] 157 tasks Apple

  [operation] 89 tasks Apple

  Launch officers: ⓘ

  com [running]. Logitech.Control Center.Daemon.plist (2013-04-16) [Support]

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2015-12-05) [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist (2015-09-24) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [operation] com.nike.nikeplusconnect.plist (2015-10-09) [Support]

  [operation] com.wacom.wacomtablet.plist (2013-06-05) [Support]

  Launch demons: ⓘ

  com [loading]. BlueStacks.AppPlayer.bstservice_helper.plist (2015-10-21) [Support]

  [operation] com.adobe.adobeupdatedaemon.plist (2015-12-05) [Support]

  [loading] com.adobe.agsservice.plist (2015-09-24) [Support]

  [loading] com.adobe.fpsaud.plist (2016-03-19) [Support]

  [loading] com.ea.origin.ESHelper.plist (2014-04-19) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-03) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2014-07-14) [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [failure] com.plexapp.helper.plist (2012-03-25) [Support]

  [operation] com.spotify.webhelper.plist (2016-03-17) [Support]

  org.VirtualBox.vboxwebsrv.plist [no charge] (2011-04-29) [Support]

  Items in user login: ⓘ

  None

  Other applications: ⓘ

  [ongoing] com.adobe.acc.AdobeDesktopService.108832.C4A769B6 - 09C 4-418 b - A723 - 4962A991F3D5

  [ongoing] com.Adobe.accmac.245152

  [operation] com.gopro.GoPro - Studio-GoPro-importer

  [ongoing] com.wacom.TabletDriver.108512

  [ongoing] com.wacom.WacomTouchDriver.108192

  [ongoing] JP.co.Canon.cijscannerregister.120672

  [loading] 398 tasks Apple

  [operation] 183 tasks Apple

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2015-12-05) [Support]

  FlashPlayer - 10.6: 21.0.0.197 - SDK 10.6 (2016-03-24), [Support]

  QuickTime Plugin: 7.7.3 (2016-02-03)

  Flash Player: 21.0.0.197 - SDK 10.6 (2016-03-24), [Support]

  Default browser: 601 - SDK 10.11 (2016-02-03)

  JavaAppletPlugin: 15.0.1 - 10.11 (2013-02-23) check the version of the SDK

  WacomNetscape: 2.1.0 - 1 - SDK 10.8 (2013-06-05) [Support]

  Web of Google Earth plugin: 6.0 (2011-03-23) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-06) [Support]

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.2 (2013-06-05) [Support]

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-24)

  User Plug-ins internet: ⓘ

  OctoshapeWeb: SDK-1.0-10.8 (2013-11-04) [Support]

  Safari extensions: ⓘ

  Turn Off the Lights (2014-07-06)

  Add to Amazon wish list (2013-12-12)

  3rd party preference panes: ⓘ

  Flash Player (2016-03-19) [Support]

  Logitech Control Center (2013-09-07) [Support]

  MacFUSE (2008-12-19) [Support]

  Yamaha Steinberg USB (2012-09-24) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 398,49 GB disc used: 347,22 GB

  G drive: disc size: 999,86 GB disc used: 280,28 GB

  Destinations:

  WD_Backup [network]

  Total size: 996,41 GB

  Total number of backups: 0

  An older backup: -.

  Last backup: -.

  Backup disk size: too small

  996,41 GB backup size < (disc 627,50 GB X 3)

  Top of page process CPU: ⓘ

  7% adobe CEF Helper (4)

  4% kernel_task

  3% photolibraryd

  com.apple.photos.ImageConversionService (2) 2%

  2% ScreenSaverEngine

  Top of page process of memory: ⓘ

  1.07 GB kernel_task

  754 MB ocspd

  459 MB com.apple.WebKit.WebContent (4)

  Mds_stores 229 MB

  213 MB mdworker (13)

  Virtual memory information: ⓘ

  7,58 GB of free RAM

  8,41 used GB RAM (4.19 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  April 2, 2016, 22:36:14 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-04-02-223614_ [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  April 2, 2016, 22:33:35 /Library/Logs/DiagnosticReports/apsd_2016-04-02-223335_[redacted].crash

  /System/Library/PrivateFrameworks/ApplePushService.framework/APSD

  April 2, 2016, 22:23:43 Self test - passed

  April 2, 2016, 17:26:37 /Library/Logs/DiagnosticReports/apsd_2016-04-02-172637_[redacted].crash

  April 1, 2016, 18:28:56 /Library/Logs/DiagnosticReports/iTunes_2016-04-01-182856_[redacted].cpu_resourc e.diag [details]

  /Applications/iTunes.app/Contents/MacOS/iTunes

  Macintosh HD (disk0s2) /: 398,49 (Go 51,26 free) - 17 errors Drive fail!

  It is clear from your hard drive is/maybe default. Make a backup, best 2 separated on 2 discs. Wake the computer from the tests. You may be able to get at least a temporary solution to erasing and reformatting.

  Make a backup, best 2 separated on 2 discs. Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run disk utility, then select first aid. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system. Use Wizard settings to restore your backup.

• MacBook pro 2015 Diode, heating problems

  Hello

  I just bought a MacBook pro 2015, one with 2.8 GHZ, 16 GB RAM and ITB Flash. [old just four days]

  The question being, the first day of the machine as well as the charger were burning Red hot when I loaded for the first time, in subsequent attempts, heating got sorted out by itself.

  Nevertheless, I had installed the temperature gauge in the machine, I look one only a few videos YouTube youtube and navigation.

  Once in every two hours a message like

  The led O GPU temperature is 106 degrees, closing applications.

  Once I click on the tool, the temperature is now reset to 30 ° C. It seems that the temperature of the Diode is to reach 106 degrees, some app is closed (no one knows the tabs I have open in Safari are works well) and then it resets.

  Is it really a problem with the thermal conductive paste or a faulty diode.

  I go to the Apple store this Saturday? Can I return the laptop and request a new or a full refund.

  Can someone please advice?

  If you bought Apple with the last 14 days, you can return it for a full refund.

  http://store.Apple.com/us/help/returns_refund
  Then you can buy a new one.

  What about Apple and they can exchange it without having to go the way of reimbursement.

• Unusually slow MacBook pro, as well as problems with power.

  I'm looking for help on setting my Mac, any help from anyone would be great!

  Recently, my MacBook Pro (running El Capitan) at the end of 2013 model started running really slow unawares (before that it was perfect). No hardware or software, changes began to really randomly goes slowly. My mac has always very well maintained, regular clean ups of junk, utility to check disk done often, no useless apps or data.

  Other questions, I'll have with power up the mac off is when I press the power button to turn off it starts then a few turns (don't not even to Apple to loading off-screen, shines the screen but then powers), I have to hold the power button for 10 seconds approximately to get power properly, when I close the lid without turning off then open it I went to the login screen instantly but then close the book Mac downs completely.

  I ran the Apple Diagnostics, no problem. I also ran repair disk utility, no change. I even did a clean install of the operating system and there was a very minor change, but always far make the level it's at.

  Thank you

  A slow Mac may be due to not enough available storage space.

  Click on your Apple  menu at the top left of your screen.

  In the menu drop down click on about this Mac , and then select the storage tab.

  Your Mac is the bare minimum needs 8 GB of storage available just for the operating system not to mention all your personal data.

• MacBook Pro hangs at startup then auto shuts

  Hello

  My old Macbook Pro (2009 ongoing Yosemite) behaves badly!

  At startup and after Apple and progress bar appears it will automatically close down after about a third of the progress bar is reached.

  I tried to reset PRAM and SMC.

  I tried to start in safe mode, but it stops before he gets there!

  Other things to try, or the old faithful servant a go to?

  Thank you very much.

  Reinstall OS X without erasing the drive

  Make sure that you have a current backup before continuing.

  Boot to HD recovery: restart the computer after the ring, press on and hold the COMMAND and R keys until the menu screen to appear.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  
  

• Sync with MacBook Pro, iMac and iPhone problems

  Hello

  I struggled to keep my gmail account synchronized through multiple devices. I mainly use iPhone and iMac and MacBook Pro from time to time. Everything I have read and/or deleted in a single device is not synchronized with the other. I have read several forums, but couldn't find a solution that could solve the problem.

  Can you please specify?

  Thank you.

  Try the search and post here.

  Gmail support

• MacBook Pro hangs at startup. Now don't go off not even when closed.  It's getting hotter and hotter and the cursor will not move!

  MY MacBook Pro screen froze on start up.  Do not move the cursor.  It turns off when I close it and it is just hotter and hotter!  Help.

  Turn the power off using the power button, unplug the power apparatus.

  If this is repeated once again, bring it into an Apple Store or an authorized service provider of testing it.

• MacBook Pro Late 2011 startup questions - SMC reset necessary after each shut down.

  I was asked to look at a friends end 2011 Macbook Pro.

  Initially, it seemed dead. No power, no response. I did the Shift + Command + control + Power to try to reset the SMC nothing helps.

  I opened the back and disconnected the battery and the magsafe. I help the power button down for 5 seconds. reconnected the dough tried power on and it didn't work until I plugged the magsafe. Ah ha I thought it, BUT. Once started it works very well, some check everything looks good and battery shows healthy with 70% of load.

  I restart the machine and it starts fine. HOWEVER. I stop the machine and I'm back to square one. Power supply photo and battery connected.

  So I rinse and repeat. battery disconnect power hold button wait 5 plug in back and then turn it on. As before it works only after the power supply was ALSO connected. to test this situation I tried again without connecting the battery and just the power supply. Since then only the battery was in, nothing until that I plugged the battery ALSO.

  So the Macbook will start only after a stop if the battery and power are both removed, button / help for 5 then BOTH the power and battery are reconnected.

  I've seen people with similar questions but no one seems the specific symptoms that it requires this reset each STOP but restarts not on the list.

  Clues, help, correct?

  See you soon

  Paul

  Hi deep:

  Have you tried resetting the NVRAM?

  Try reseting NVRAM. How to reset the NVRAM on your Mac - Apple Support

  Then try reseting SMC. Reset the management system (SCM) controller on your Mac - Apple Support

  Then, try a safe boot. Safe mode try if your Mac does not start-up

  Also, see this help file. If your Mac will not turn on - Apple Support

  Kim

• Satellite Pro L300-128 - startup problem

  Hi all

  I recently bought a Satellite Pro L300-128 GB specification, that has a Celeron M550 running Windows XP and a construction date of the end of June 2008. I have a problem with the switching on of the machine if it has been turned off for a long period of time.

  Basically, if the AC cable is inserted into the computer laptop and plugged in, the green light turns on, but pressing the button it does nothing. By the process of elimination, I have found that, after a short period of time (say 15-30 minutes) if (and only if) the AC cable is then removed from the laptop, it lights up then!

  Plug the AC cable, while the laptop is on, do not cut the machine and charge the battery as usual. The battery life seems very good, if a little short (say 1.5 - 1.75 hours when used "constantly").

  If the computer is restarted, it lights again very well - if it is turned off and left for a few minutes, once again no problem. But, if she is not with the battery fully charged and left all night - it lights again in the morning.

  Now, as a new machine, I'm wondering if the battery needs a long initial load (such as a mobile phone)? Nothing is said about it in the manual. I have not yet checked if the battery down completely himself during the night. I haven't run the battery to the laptop for a long time (say all day) to 'trickle charge '. I don't know if the period from 15 to 30 minutes to get the thing started is once again because the battery is completely discharged during the night (I need to check the BIOS to see if "Wake up we LAN/wireless" is activated)-anyone know how long a fully discharged battery must be charged before that the machine will let you start it?

  Under the machine, there are two battery release buttons and it seems loose - I don't know if it's related, but can't see how. Moreover, when the question arose (during the first delivery the laptop), I removed the battery and tried power upwards of food, but nothing to do.

  I ran all the software updates (chipset etc) I can find on the download page, the BIOS version is 1.40 (last) of the factory.

  Any suggestions would be welcome before I have use the service of repair under warranty for the first time! I don't know if it is related to the fact that the power button seems to be a micro switch rather than a good button/switch in the conventional sense of the term, i.e. you can 'feel' it do something!

  Thank you very much
  Richard

  Hello

  If you have purchased a new laptop, the battery is empty and needs to be charged in the first place.
  You can also connect the adapter to the laptop while the battery is empty and the laptop should also lights up properly.
  The laptop must also run without the battery and using only the AC adapter.

  It should also be possible to put the laptop by pressing the power button for about a second, if this is not possible, a malfunction of the laptop could be possible.

  In such cases, it s always advisable to contact the local ASP for a verification of the laptop.

  I mean your laptop is under warranty and if something is not wrong with the machine so everything must be replaced free of charge

  In my opinion, the laptop must be checked!

  Concerning

• Premiere Pro CS6 video startup problem

  I've just updated for Premiere Pro CS6. On one of my systems, it would not load because of the following error:

  Adobe Premiere Pro Startup Error:

  Adobe Premiere Pro can not start any capable video game unit. Please update your video display drivers and start over.

  Here are my PC specs (not this, but tough CS5.5 managed very well):

  Windows 7 Ultimate 64 bit

  Intel Core i7 870 2.93 GHz

  16 GB OF RAM

  NVIDIA GeForce 9800 GTX (296.10 driver version)

  Anyone else arises or has a solution?

  Nevermind that I fixed it. If anyone has the same error, simply run as administrator FTW.

• Satellite Pro L550N-17N startup problems

  First of all, excuse my bad English.
  I try to start a Satellite Pro L550N-17N on sector (without battery):
  -the AC light is green,
  -When I turn on the computer, the power light is green (but I hear no fan noise...).
  - then after 5 seconds, the power turns off light (the AC LED is still green).

  Note that no message appears on the screen.
  Does anyone have an idea?

  Thank you very much.

  Hello

  Disconnect the power adapter and remove the battery.
  Press the power button for about 30 seconds.
  Insert the battery and connect the AC adapter and then try to switch on

  You see something on the screen now?

• MacBook Pro screen re-recurring problem.

  In November 2015, I got a replacement of the screen as my Mac anti-glare treatment wears.

  Just one month later, replaced screen got weak horizontal gray bands that goes further, from right to left, I got a replacement of the screen before the end of 2015.

  Now, the March 2016, I had some stripes of vertical pixels affected when I apply pressure on the screen. How can I fix?

  Just in case you are wondering this odd task between the two, it is the slider. I want to show that the screen has some problems with it, so I place my cursor here to show that this isn't where the screen ends.
  

  It is a hardware problem with no software solution.  It will require a replacement.

  You have not identified the EXACT MBP model you have and perhaps with the display problem, it could come under this replacement program.  Read this link.

  https://www.Apple.com/support/MacBookPro-videoissues/

  Ciao.

• Upgrade memory for MacBook Pro mid-2014

  I have a Retina (2014 Mid) MacBook Pro. There are already 16G memory. But I still even is not enough for me.

  Can I add more memory?

  RAM is not extensible on a Macbook Pro of the retina.

  I'm sure that it is soldered to the logic board.

• MacBook pro grey after sleep screen

  I have documented on this problem for some time now on the MacBook screen goes black or rather a visible backlight gray but black screen after being in standby mode. I tried the reset SMC and command + Option + P + R. I am owner of a mid 2014 13 "macbook pro retina.

  Hi Youngnn,

  Welcome to Apple Support communities. It is my understanding you are MacBook Pro shows a gray screen after being in mode 'sleep'. I want to help get this resolved with you.

  You did a great job with the steps taken so far. At this point, I recommend this test in safe mode. Start in safe mode prevents the opening and start-up items to open automatically. Safe mode also allows your Mac to conduct some controls. If the problem does not occur in safe mode, it is possible to a startup item or logon are the cause. Please follow the steps below to start in safe mode:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  If the problem persists in safe mode try this test to another user. This will help determine whether specific user files, settings and apps cause this problem. Please use the link below to test in an another user account and additional steps:

  How to test a question in another account on your Mac.

  Have a wonderful day!