2106, 2nd add WLAN

There is a thread here somewhere that has helped me get my 2106 implemented with a WLAN a WLAN guest. Now, I'm putting in place a 2nd WLAN on the same WLC. I have created a new dynamic interface, WLAN and corresponding AP group VLAN. However, the lone AP in the new WLAN grows on two local wireless networks, even if it is configured as being only in the second. I must be missing a step in config here, but what?

Hi Jeff,

The feature you're looking for is called WLAN substitute :)

Allowing substitution WLAN

By default, all defined WLAN transmission on the controller access points. However, you can use WLAN editable to select WLAN is transmitted and who are not on a per access point basis. For example, you can use WLAN to control override goes where in the guest WLAN network or you can use it to disable a specific WLAN in a certain area of the network.

This doc.

http://www.Cisco.com/en/us/docs/wireless/controller/4.0/Configuration/Guide/c40wlan.html#wp1114777

Once you create a new WLAN, WLAN > page edition for the new WLAN. In this page, you can set various parameters specific to this general policy, RADIUS servers, political security WLAN key, and 802.1 x settings.

* Check Admin status under general strategies to activate the WLAN. If you want AP broadcast the SSID in beacon frames, check the SSID broadcast.

Note: You can configure up to 16 WLAN on the controller. The Cisco WLAN Solution can control up to sixteen WLAN for Lightweight APs. Each WLAN has an ID separated from WLAN (1 to 16), a WLAN SSID (name of the WLAN) separate and can be assigned to single security policies. Lightweight APs broadcast all Cisco WIFI WLAN SSID Solution assets and apply the policies that you set for each WLAN.

The good doc.

http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml#C3

I hope this helps!

Rob

Tags: Cisco Wireless

Similar Questions

  • How to set up a WLAN connection?

    Hello!

    I'm new to this forum. I need help with a problem of wireless connection. I bought a Cardbus adapter for my Toshiba and I try to establish a wireless connection; my computer detects wireless (mine among them) but it won´t work.

    A message appears that says "windows won´t be able to connect to the selected network. I keep updating the list of networks, but the same thing happens all the time. I Don t know what to do.

    Can someone help me, please? Any idea?
    Thank you much in advance.
    Kind regards
    Beatriz

    Hello

    OK, it seems that you have properly installed the WLan card and everything directly in Device Manager.
    You have configured the router WLan? Do you have some cipher and/or filtering by mac address?
    Please check again!

    If you use the Wlan configuration option clean windows, you must verify the simple settings in network connections-> wireless network connection properties.

    New windows should appear and you should choose the wireless network tab.
    Please check if it use windows to configure my WiFi is marked. In the preferred networks field, you could add WLan network. Click on properties and you should be able to configure encryption.

  • How can I write the value of floats Unitronics vision230 PLC with modbus Ethernet

    How can I write the value of type Float in unitronics PLC Vision230 modbus ethernet (Ethernet Master Query.vi MB) usinsg I read and write register 32 bits, for example, I want to write the value 23.45 2nd Add. MF. And registry MF is the 32-bit registry. I read and write register 32-bit.

    Narendra.

    Narendra,

    Two characters can type cast into a uint16 you VI supports.

    To summarize. Take one (4 bytes). Flatten it to a string (4-byte) divided this string into two parts of 2 bytes each. Cast in u16 (16 x 2 = 32-bit).

    However, if you really want to follow the IEEE standards then you will need refer this KB. His is not that simple, but seems closer to what you are looking for.

    Amit

  • Conditional formatting using 2 columns in BI answers

    Hello

    Do you know if it is possible to use a conditional formatting based on the values of 2 columns?
    At the moment it seems to be only possible to conditional formatting based on the value of
    1 column compared to a hardcoded value.

    I mean ' If col A > col B then turn red collar A value '.

    Thanks for any help.

    -Jenny

    Yes, because we can do conditional formatting based on other columns for a column:
    Suppose you pulled of A, B and wants to apply the color RED on one

    Extract columns A, A, B (twice) for the 2nd, an expression of something like
    -case when A > B then end, otherwise 0 1

    On implementing shaped conditional A(1st A)

    Add Condition-> choose 2nd
    Add the value 1 and the RED color value.

    Appreciate if you score as correct/useful

  • How can I add a 2nd email address on iCloud Mail on Windows 10?

    I would like to replace Outlook on my new computer with iCloud Mail.  I have a 2nd email address for my wife.  How can I add this 2nd address?

    Or by using an alias or a second account. The two ways of working.

  • New Question: Add a 2nd 'Home' icon in the toolbar?

    In an old question, I asked about adding a second 'home' icon I could randomly onto the toolbar since the old old thubber it is more than that.

    At some point after this forum question - that was not answered - someone offered me an add-on that would provide the 2nd type of House, but in B & W icon. No one knows about it? I can find it is no longer. Thank you all.

    Hello

    You can also try to Custom Buttons. Please see this.

  • 1. is there an add-on to add a 2nd 'Home' icon in the toolbar?

    1. in a previous version of Firefox 3.5.x there is an add-on called Throbber Button 1.1 that allowed me to have a 2nd icon that would take me to the Home Page. Is there a replacement for this app for worm 9?

    2. is it possible to colorize the arrows "go back and go forward"?

    3. is it possible to have the 'new tab' in the Navigation bar that allows you to be near the X on each tab?

    Thank you very much. I appreciate your response.

    You can double-click or middle-click empty space on the tab bar to open a new tab.

    It's just no longer in the context menu of the tab bar.

    There are comments that the Throbber Button extension works in Firefox 4, so you can try to raise the maxVersion in install.rdf to see if it works in the current version, as well.

  • Is it possible to add the MiniPCI WLAN Module for Satellite Pro 4300?

    Hello

    I got a 4300 Satellite Pro and I want to add a WLAN MiniPCI Module. Is this possible and is someone able to provide details where to add this module for example some technical documentation in images.

    Greetings
    Florian

    Robin is right about the upgrade. It is not possible. in my opinion the best solution for you is to use a PCMCIA WLAN card.

  • Unable to access my Apple TV after you add the 2nd layer of security to my profile of Apple

    Hi, I have authorized after Apple install a 2nd layer of security on my iPhone and basically add it to my profile. Now I can't access my purchases on my 2nd generation Apple TV (film music, video). There is no way to get the required security code, which is showing on my iPhone, effectively disabling my Apple TV. This apparently an Apple problem, that bears down on us customers. Now life is terrible after I allowed to enter the 2nd layer of security because things at Apple don't seem to work. I'm so frustrated once again. Zed

    You can disable authentication to two factors of https://appleid.apple.com/

    You can report the problem through http://www.apple.com/feedback/appletv.html

    TT2

  • I can add a 2nd HDD on my Satellite A300 - 02c?

    Hi all

    I wonder if it is possible to add a 2nd HDD in my A300 - 02c?
    There is a HDD 2 slot, but no sata connector on the card (see the link to the image).

    http://www.NotebookReview.com/picture.asp?f=36752

    I wonder if it is possible to add the connector (by myself or by the customer service).
    If anyone knows if it is possible and where can I buy the sata connector... Please leave a comment :)

    Adrien.

    I think that there is nothing you can do about it.
    Satellite A300 comes with several different hardware configurations and several different mothers. Really, I don't think that you can add it in addition.

    FYI exact nearest maintainer contact authorized Toshiba and ask for help.

    If anyone has any experience with this stuff then the Toshiba service technicians.

  • How to add a 2nd hard drive for HP Pavilion DV7!

    How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

    (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

    Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

    (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

    Readers - Windows 7 PDF

    (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

    (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

    Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

    My solution.

  • RN204 add a 2nd smaller drive

    Hi guys,.

    New here. I sin ready 204 with a 4 TB drive. I have set up for a long time and now I released a former 500 GB drive. I would use the 500 GB as a backup. I want to do weekly work which will copy the most important records of the 4TB in the 500 GB drive. (No. $ for 2nd disc of 4 TB for now).

    Is the only way to do this is to create a 2nd evolves and so swithc for Flex - Raid? Switching for bending raid will delete data on my 4 GB drive? If the disc is not in the ReadyNas?

    You have all the best recommendations?

    Thanks in advance!

    See you soon,.

    Dimitar

    Yes, you are on the right track.

    1. Switch to Flex raid (your data on disk 4 to be not affected)
    2. Add the new disk
    3. On the volume page, create a new volume with the new smaller disk

  • I like to use 2nd HARD drive tray to add SSD drive

    Hello

    I like to use the 2nd HARD drive drawer in order to add an SSD.

    Are there additional parts required in order to set the new drive? If Yes, please mention the name and part number.

    Your
    Stephan

    What model of laptop do you have? What's second location of HARD disk available?

    What you need is the HARD disk enclosure. Something like this. It is not easy to know what part number, there, but you can contact the nearest Toshiba service provider and order the right one.

  • How to add and remove songs to a 2nd ipod in iTunes

    I have a 2nd ipod connected to my iTunes account however I'm having trouble to add and remove songs on this 2nd ipod.

    FAQ says simply drag a song from the list of music on the playlist to add and song highlight and press Delete to delete however by dragging the song more did not work and I can't find a tab delete when I select a song to remove.

    Thanks for any help and advice.

    Select the relevant tracks, and then press delete or Backspace should be used to remove the device.

    If files slipped and dropped to this topic does not transfer so it may be best to restore the device, then recharge it. In practice, making lists of reading with the content you want to sync to each device and then synchronize each device with its corresponding list may be easier to manage manually.

    TT2

  • Can I add a 2nd credit card to my account for the payment?

    Can I add a 2nd credit card details to my account to use for the payment?

    No, you can use a credit at a time card.

    By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

Maybe you are looking for