23 - d130ea pci express connector envy

Recently purchased a dvb - s2 (pci express) card, can't find the connector motherboard relevant.

Any help much appreciated

HP ENVY 23 - d130ea TouchSmart all-in-One desktop PC is a computer 'All-in-one' who doesn't have any full size PCI Express slots in it.  The PCI Express slots only this computer, are strictly internal PCI Express mini card Sockets and a PCI Express MXM slot for special MXM graphics card.

If you have any other questions, feel free to ask.

Please click the White Star of KUDOS to show your appreciation

Tags: HP Desktops

Similar Questions

  • HP Compaq 8100 Elite: Video unrecognized card in PCI-Express x 16 slot for security

    I disable the PCI Express connector in the computer - security - Slot Configuration on BIOS.

    I don't know that my card on Board did not work and now machine does not start, machine beeps 6 times (error video card).

    I can't access the bios.

    I try to reset the CMOS, remove the Green rider, remove CMOS battery, press the button within 10 seconds, press the power button (to remove rest of energy.

    But none of it works.

    Can someone help me?

    How can I reactivate PCI Express x 16?

    Hello:

    If your integrated graphics card does not work, and reset the CMOS does not work, you can try putting the PCI express x 16 video card, you now have in the location PCIe White x 4 slot (slot next to the slot PCIe x 16 black white video card) and see if you can get into the BIOS to change the PCI x 16 setting.  It might work in the x 4 slot.

    If it does not, you will need to install a video card PCI (the one that goes in one of the white PCI slots) and use it to get into the BIOS, so you can change the settings to enable the location of PCIe x 16.

    So see if you can find a cheap, used, video card PCI on eBay, and should allow you to have the video again.

    You should also make sure you have removed all the connections of the computer when you reset the CMOS (all cables, power supply, mouse, monitor, etc.).

  • P5LP - Incompatible with 1 GB card video and/or 2.1 PCI Express card?

    I have an old m7480n I am upgrading the video card.  I found and read many post on the problems of upgrade to 2.1 PCI Express card or current cards with 1 GB of memory.  I need the answer to help me make the right choice of video card. Or just tell me which card will work for about $100.

    Plug;

    Power supply 450 watts (360 watt on rail 12v with 6-pin PCI-Express connector)

    3 GB Ram

    BIOS is 3.19

    Motherboard; ASUS Emery-ul8e

    Try and could not install a HD6770 1 GB PCI Express graphics card.

    Fixed; I'm running with a GTS 250 PCIe 2.0 512 MB video card now.

  • HP ENVY 15 Notebook PC: unknown device on PCI Express Root Complex

    Gentlemen.

    Recently bought the HP Envy laptop and upgraded to Windows 10 immediately.

    HP ENVY 15 Notebook PC
    15 - k200na (ENERGY STAR)
    L0C83EA #ABU

    10 64-bit Windows Home

    Device reporting Manager: unknown device on PCI Express Root Complex

    Hardware ID:

    ACPI\VEN_HPQ & DEV_6007
    ACPI\HPQ6007
    * HPQ6007

    have been unable to solve together searched a lot!

    Can you please help.

    Thank you

    Dave

    Hi, Dave:

    You need this driver...

    This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

    File name: sp71811.exe

  • ENVY of HP TouchSmart m6-k015dx: pci express root error complesx

    My product id is TouchSmart from HP ENVY m6-k015dx showing pci express root complex error please tell me how to solve and I can add dedicated graphics in this laptop if yes what is the best for this laptop?

    rajan3 wrote:

    My product id is TouchSmart from HP ENVY m6-k015dx showing pci express root complex error please tell me how to solve and I can add dedicated graphics in this laptop if yes what is the best for this laptop?

    I made a simple search for HP and found this:

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/unknown-device-on-PCI-Express-root-complex/TD-p/4765843

    See if works...

  • HP ENVY m6 (m6-1205dx): unknown device on PCI Express Root Complex

    After improving to a fresh 10 windowns a unknown device apeared in the Device Manager. What could be?

    General

    Type of device: other devices

    Manufacuturer: unknown

    Location: on PCI Express Root Complex

    No driver (Code 28)

    Device instance path

    ACPI\HPQ0004\3 & 2411E6FE & 0

    Hardware ID

    ACPI\VEN_HPQ & DEV_0004

    ACPI\HPQ0004

    * HPQ0004

    Hello:

    You need the driver for this device...

    FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  • Omni 120-1024-is it possible to install the firewire port via the mini connector PCI Express to spare?

    Hello, my old HP is dead and we bought the Omni all-in-one, I must have fog on the brain I never even thought to the fact that he doesn't have a firewire and I have 1 years worth of my newborn, sitting in the video camera DV tape.

    I see on the site of HPs that there ' a half-length PCI Express mini card "

    But I realize that this all-in-one is more like a laptop to the extent of the site.  Is there a map that I can buy to add firewire capabilities using this slot on the motherboard pci express?  It doesn't seem like he would have anywhere to run 'out' because there are no visible locations, but thought I'd ask.

    I'll be so sad to know that I have no way to capture the video more.

    I'm guessing that the "PCIe half mini map" slot is already occupied by the adapter 802.11 b/g/n. discover your Omni 120-1024 to the HP part surfer. Scroll almost to the bottom and look for "PC LAN card wireless (Interface) p/n 638403-001 - Flamingo, Halfmini 802.11bgn 1 x 1.

    Frank

  • Pavilion m8430f: PCI Express x 1 USB 3.0 card upgrade for m8430f desktop

    Hi, I have a 2008 Pavilion computer m8430f desktop I want to upgrade to USB 3.0. I have a PCI Express x 1 connector free but wonder if this slot will have enough bandwidth bandwidth and speed to make it interesting to go to USB 3.0. If the speed is not there so why upgrade to USB 3.0 is my point of view. Thanks, RobOH1980

    Hello

    It is slower than USB 3.0 (in theory) but still much faster than USB 2.0

    Kind regards.

  • Z600 / 2 x 6-pin PCI-Express

    Hello

    I got a HP Z600 workstation, without any graphics card as a gift.

    I bought an ASUS 660 Ti, and when I tried to install it, I surprised a 6 pin PCI-Express power connector is "disappeared".

    A PCI Express power connector out of the PSU and I need 2 x molex to use an adapter, but there is only a single molex.

    I started reading some forums, manuals, documentation, documentation of spare parts, but I really still don't know what solution is the best regarding my problem.

    I checked and the power supply is good enough for this graphics card but... I can't install it.

    If you have any ideas or if you have already encountered this problem, thank you very much.

    NASK ".

    Skylarking, thank you very much for this detailed answer the so.

    I entirely agree with what you said, and that's why I asked here, to the community, they could think about it. Because it's a job and it is not dedicated to use this kind of graphics card. But this work station is a great computer. All I need are met by this workstation, but the last missing part is the graphics card.

    This workstation was delivered with a Quadro FX 1800, unfortunately, I didn't have any graphics card, even if the graphics card would not be enough for what I do.

    I checked on some of the comments, except if you make some points of reference long and high graphics card should not consume more 143W (tested in 10 minutes, bitmining, mainly GPGPU).

    As for the information I have now, I could sell this workstation and build a regular desktop computer.
    But I can't find any good as good as the HP Z600.

  • the PCI Express 3.0 GT 640 work in my Pavilion Elite m9340f?

    Hello

    My 9500 GS started screaming and I need to replace. A GeForce GT 640 2 GB 128 - bit DDR3 PCI Express 3.0 x 16 recommended, but there PCI 3.0 and I want to know if it will work ok.

    I have temporarily replace the original map with a 210.

    Thank you

    Bill

    bigbillh wrote:

    Hello

    My 9500 GS started screaming and I need to replace. A GeForce GT 640 2 GB 128 - bit DDR3 PCI Express 3.0 x 16 recommended, but there PCI 3.0 and I want to know if it will work ok.

    I have temporarily replace the original map with a 210.

    Thank you

    Bill

    Hello

    Yes, it will be. PCI x 16 3.0 is backward compatible with the old x 16 versions.

  • What type of video card? PCI, PCI Express or AGP?

    I have a new hp a6647c and you want to use two monitors. I need a new monitor VGA video dualistic structure. A store asked me what type of Governing Council would hold in my computer, CPI, CPI Express or AGP.  So, how can I determine which Board is necessary for my hp 6647?

    Here are the specs:

    http://support.HP.com/us-en/document/c01559155

    You can not use an AGP card. There is no AGP slot. You have an open pci express x 16 video card slot and a pci slot. You may in fact theoretically have three monitors; two ducts by a dual PCI express head and a third led by a pci video card. If you plug a video card into one of the expansion slots, you will lose the onboard video capability.

  • Tecra M9 - PCI Express Error at startup

    Hello everyone...

    I have a Toshiba Tecra M9 (PTM91E-04R03TEN)

    http://www.Toshiba.IE/innovation/JSP/supportMyProduct.do?service=IE#TAB0;

    Setting in motion,-wristwatch splach Toshiba and then "PCI Express error." screen on a black screen
    I can't get beyond this black screen
    and I can't get into the BIOS?

    Once that he managed to start completely, let him turn for a while I record information from the HARD drive. but then, the problem started again.

    In my view, that it is a problem with the nvidia GPU (in cycle Fatigue on the BGA) card
    I have the stripted computer laptop down... and bought ArctiClean thermal Pad, & Arctic Silver for "repair".

    Should I have someone analyze the material and find the troublemaker?... OR... should I just of reflow of the GPU.

    I'm technical interest... but not a PC / laptop technician: (..)
    any instructions on how to proceed would be received with gratitude...
    Can I just "bung it in the oven" and see how it goes? :) :) .

    Kind regards
    Peter

    Hello

    I found and read your other post regarding this problem and in my opinion the PCI Express error is related to a PCI device (i.e miniPCI module as WLan / Bluetooth, etc.) connected to the motherboard.

    Of course I can't say for certain that this question isn't related to a GPU malfunction.
    Usually, these details can be provided only by a technician who checked the laptop's hardware.

    Usually I put t recommend to disassemble the laptop. It s very difficult to perform this procedure and of course there is always a risk of damage part do such procedure without any instructions.

  • PCI Express Error by Qosmio G40 - 10 p

    Yesterday, I help since the announcement... PCI express train error directly after boat Toshiba logo. Black screen and this announcement. What is the anomaly? I also do not reach in the BIOS.

    No reaction on all keys except with F12. How can I fix the error?
    If someone has already raised with him the experience.

    Thanks for your help.

    You can start your Qosmio laptop in SafeMode (F8 at startup)?
    You can also try is restoring the system or install Windows using the Toshiba recovery disc.

  • What version of the PCI Express x 16, it's my motherboard has

    I am running:

    Pavilion - p6320y

    -AMD Phenom II X 4 820

    -8 GB RAM

    -SATA HARD DRIVE 1 TB (7200 RPM)

    -Motherboard model: Violet6-GL8E

    Question: What version of the PCI Express x 16 is the slot on this motherboard: 1.x, 2.0 or 2.1?

    Can't get this information anywhere.

    Hello:

    I don't think that anyone will be able to give you a definitive answer.

    This article gives the date for the PCIe ranges various x versions.

    http://en.Wikipedia.org/wiki/PCI_Express

    Since you have a relatively new PC, I would say that it is certainly not less than PCIe 2.0 and probably PCie 2.1.

    I have a HP 8200 Elite CMT. I think that it is released at the beginning of this year, or very end of last year. 6570 PCIe 2.1, I use an AMD Radeon card in my PC.  It works very well.

    Paul

  • HP Compaq 6200 pci express power

    Hello

    I have a HP Compaq 6200 Pro format microtour and tried to find a way to install a pci express video card which needs extra power supply (6-pin).

    The problem is that the power supply of the computer is not such cable.

    Thank you.

    Hello

    Thanks for your reply. I like a SATA cable 6-pin adapter that solved my problem.

    Kind regards

    Dorin

Maybe you are looking for

  • The end of 2013

    Model by the end of 2013 and newer, "cannot" have a ram upgrade, can? Thank you in advance...

  • How can I fnd my claim code and the reprint of the web services information sheet

    Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code. Could not find anything under Printer Control Pa

  • Code 8 with a corrupted hard drive?

    I did an analysis of the utility disk system and returned with a corrupted hard drive that needs to be repaired. As well as a Code of 8.  What does that mean? Do I need a new hard drive? Or can it be fixed?

  • No errors, do not print

    HP C6150 does not print Yellow.  Changed yellow cartridge twice.  Full ink level with no erros, says, but doesn't print Yellow.  I tried image yellow, yellow text and it pulls paper through without even trying to print.  No error, no problem - fine c

  • (dvd player) E:\ is not accessible. The disk structure is corrupted and unreadable

    I get this message when I try to play a cd through "computer." When you insert a dvd movie, the screen gets an a 'multi model' as the places of the miniature and the computer hangs.