230CX unable to re - install windows

I have a 230CX with 48 MB of ram, hard disk 1.3 GB andonly floppy drive, no cd-rom. years cause the IFR-usb port does not work I tried updates to win95 for win98SE, it doesn't have a disk cache program pre-installed.
I followed the steps in the to txt-installation of win98SE, updated program the bios in all the other stuf I had to make.
Stil of upgrading will not work so I decided to format the beginning of the hard drive in a clean install.
After remake the partition in formatting, I can only instal win3.1 but even win95 is impossible to install because of the disk cache program seems always running on my laptop. The installation program starts, but after you insert the second disc of win95 after preparing the installation program, SU-0013 error en I have to close the installation program.
All the utilities, I find are based on windows and will not work in dos mode.
I bought the laptop second hand and no disk provided.
Could someone help me with some tips work?

Hello
Your problem is common for FAT32 (except if you divide the drive hard unless sections 512Mb) http://support.microsoft.com/default.aspx?scid=kb;en-us;166466
If not, do a bootdiscette own win98 and a partition on the hard drive, FAT32, and you should be homefree.
concerning

Gandalfwhite

Tags: Toshiba

Similar Questions

  • ZBook Studio G3: Unable to clean install Windows on ZBook Studio G3

    Good afternoon. I post what after having exhausted all other options I can find.

    Any laptop computer that I own, I build from scratch. Once it is built and updated and installed the software, I snap a picture of the device. This time, however, I can't get this system to install Windows 7 Pro x 64.

    At first, I couldn't even it to begin on a USB or external CD drive. An hour later, I've updated the BIOS and reset all the values by default and boom, he finally loads Windows.

    Now in the configuration process, but every time I'll watch readers [format and what not], he tells me that is missing a required device driver. I select my language and go forward, but stuck in the same place.

    This is where I become super confused: this laptop model is not a CD/DVD player available, but he told me that I'm missing "a required CD/DVD drive device driver. What? Ok.

    I downloaded all the drivers for the laptop, as well as used a 3rd party software all export them to another drive. It tells me to insert a CD/DVD [although there is none] or a flash drive to install the drivers. I did it with both a drive and external CD/DVD with a 2nd flash drive, but still get the same message.

    My experience tells me to disable USB 3.0 and force it to 2.0, at least until I can get the OS installed, but I can't find any option for this in the BIOS. Someone at - it other ideas to use?

    Yes indeed, I was able to get solved...

    The accompanying CD was the key. I thought initially that this is what I used but apparently not. I work in an IT Department, so I have a thousand of these HP DVD. Once I plugged it in the DVD provided with the laptop he started right as there was never any problem at all.

    I contact HP support on this issue and they were about as useful as Comcast Customer Support [for those of you who know what it's like]. I was supposed to get at least a phone call from a person, but never did.

    But there you go!

  • recovery of lost bitlocker keys and unable to clean install windows 7

    Hi friends,

    Two days back, I used bitlocker in my windows 7. At this point, I forgot to save the Bitlocker recovery key in an external drive and saved in the internal hard drive. The next day, when I started the laptop does not start and the key demand of bitlocker recovery which I don't own. For this reason, I am unable to boot my system. Then I tried clean install the OS with my recovery of windows 7 dvd. But at that time also he asks me to disable the Bitlocker for which I'm not having the recovery key. So I'm not able to clean install the OS also. So how could I solve this problem and make my laptop works properly.

    If someone knows how to fix this please tell me.

    I don't use BitLocker, so I can't confirm your request. If it is correct that I would use a third party tool to repartition the disk. Here are some candidates:

    • Acronis Disk Director (cost money)
    • Boot of Ubuntu CD (http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windows-computer/) (free)
    • Connect the drive as a slave drive to some other PC.
  • Unable to load & install Windows 7

    When I load DVD Win7 OS, after all files are loaded, a window shows"a device cd/dvd driver is missing. It just does not move. Please advice

    1. If you have compatible hardware and your computer still stops responding, disable any unnecessary hardware. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

    2. your installation media may be corrupted. Try to download a new copy and try again.

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  • The time machine shaped my result of ssd unable to check my key when installing windows?

    Brief summary:

    My machine: Macbook pro mid 2012
    What I have: Samsung Evo SSD, optical Bay caddy, 8.1 windows bootable dvd with serial
    I wanted to do: install windows in my second internal SSD (optical Bay)
    What went wrong: Enter key I get: "we could not verify the product key. Please check your installation media. »

    I suspect that the problem is: I have formatted by mistake the SSD mac front.

    Question: Has been put in shape my SSD the cause of the problem? and if yes how can I do to reset?

    Detailed long version

    I have a macbook mid 2012 retina not pro that I wanted to have the option to be able to boot from a windows and a mac. As a result, I bought a samsung EVO solid state drive for this purpose. I decided to try the drive and put it in instead of the optical drive caddy the day I got it. I was invited with the message that the mac was unable to acknowledge it and follow a few steps online to format. I would find it later when we look at a forum that I should have left the unformatted SSD. However, I tried to install windows on the EVO by placing the optical drive in the computer, put the EVO in the main Bay. I put the windows cd in and followed the installation. Everything was good until I had to put in the windows key. I put in and received the message "we could not verify the product key. Please check your installation media. "I double checked to see if it was right by voluntarily entering a wrong key he gave me a message that the key was invalid. Snooping around, I tried to reset the drive by using the offer of advanced tools and I was told that windows did not have access to the partition or something of the sort.

    A format the drive of the source of the error and if so is it possible to return to the factory settings?

    All the advice/help is greatly appreciated! Thank you very much!

    The formatting SSD is not related to the issue with the product key. Windows Setup reformats the SSD in the main Bay NTFS still. If the SSD is less than 2 TB, you can format the MBR with attempts as well as FAT32 format.

    Your model is compatible with the installation from DVD and USB, both. You can also download the ISO of Microsoft W8.1 to the https://www.microsoft.com/en-us/software-download/windows8ISO to ensure that your DVD is not a several bits (32-bit and 64-bit DVD).

  • Unable to connect to google after installing windows 10 "secure connection failed".

    I installed windows 10 today.

    now, every time that I can't get to google/youtube to firefox, internet explorer and opera.

    I get this error:

    "Secure connection failed".

    The connection on www.google.com while the page is loading.

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
       Please contact the website owners to inform them of this problem."
    

    I would appreciate help, google and youtube are rather important

    Sorry for the delay, long day away.

    With this many cross-browser issues, can you confirm that your system clock date, time, and time zone are all correct? SSL validity checks are time sensitive.

    If you see a globe, I think that you are unable to use an HTTPS address. Usually Firefox displays a padlock or a "!" icon in the shape of triangle on a HTTPS address depending on whether the certificate withdraws or has a problem.

    Is there a code in parentheses, separated by underscores in the error page? If so, could you copy and paste this code.

  • Re-installed windows 98SE on satellite 230CX only one problem left

    I have just re installed windows 98SE on and old satellite 230CX and I only have one problem left. Whenever I start windows it is a plug-and-play monitor and try to find a driver for it. There is no connected another monitor and the screen works well. I know this isn't a major problem, but it's just bugging me now.

    Any help would be appreciated

    See you soon

    Rob.

    Hello

    I found the info that this camera comes with Win 95 and on the Toshiba download page under archive, you will find all the drivers you need.

    Try to install the driver display that there are listed. This is a very old unit and I can't tell you more about your problem.

  • Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

    I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

    You are the very welcome.

    I do not take up that simple...

    Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

    These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

    Paul

  • I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

    I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

    original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

    If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

    1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

    2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

    3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

  • I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system.

    I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system. good quick response.

    Hello

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    Here's how to do a clean install of Vista:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    See you soon.

  • I am unable to do the windows updates. My computer States tries to install 1 of 25, but no progress.

    I am unable to do the windows updates. My computer trying to install updates, but is blocked to install 1 of 25 updates.

    What should I do now?

    Thank you very much. I solved the problem using Fixit after a suggestion of TaurArian.

    Also, he told me how to not to receive other suggestions.

    Thank you for your help.

    Susan J.

  • It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

    I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

    "Windows Setup could not configure windows to run on this computer hardware."

    I then click OK and then this message:

    "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

    I have computer knowledge very very basic.

    Please help me!

    Thank you

    Hello

    You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

    You can also try the Forums of HP Support for assistance.

    http://h30434.www3.HP.com/

    See you soon.

  • When I install windows 7 on an external hard drive a message will be appear "windows is unable to install any usb drive.

    When I install windows 7 on an external hard drive, a massage will appear "windows is unable to install any usb drive. tell me how to solve this problem.

    Original title: installation problem

    Windows 7 may not be the installation of a device from external storage such as a hard drive external or USB Thumb drive (with the exception of eSATA).

    You must install Windows 7 on a storage attached internal device.

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  • I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

    I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

    uninstall any version of acrobat is installed.

    clean by Download Adobe Reader and Acrobat tool - Adobe Labs

    Restart your computer.

    delete all to delete pdf files.

    If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

  • HP TM2-1010EA: Windows 10 could not install - unable to return to Windows 7 to collect

    Hello

    An installation of Windows 10 has failed the background download / install on July 29.  Laptop TM2-1010EA

    Several tries to get 10 win repaired failed, but also now is not a system Windows7 on so cannot restore the back up that I created on an external drive.

    So, try the discovery in the BIOS, installing corrupt Windows 10 tries to start, not Win 7 recovery.

    I understand a pre installed Windows 7 I have the product key cannot be used to download Windows 7 ISO from scratch, or activate Windows 10 via an ISO. Although the latter failed during the installation as well.

    The black screen issue produced with Win 10 installs where no cursor, no no hard disk activity no change being installed even after left for six hours.

    Notepad so in limbo with no operating system. Any suggestions as a way to get some kind of OS to progress.

    Thank you.

    David

    Found my own fix then add it here in case other people have 10 Windows Update problems on a laptop TM2-1010EA.

    I created a DVD of recovery on a HP desktop computer. Used to start my laptop corrupted which support Win 7 or 10.

    This allowed me to reinstall the complete system image before the upgrade attempt for laptop, I created.

    The problem of 'black screen of death' seems omnipresent on a variety of systems, judging by the 11 pages of discussions already generated since yesterday on this subject on www.tenforums.com

    Some believe that it is the associated video driver. See also temporarily a work screen 10 Windows on my laptop, and then it went black.

    Will not try the upgrade again until stability is assured. The road to download ISO 10 Windows does not work as it will not accept the pre-installation Windows product key with HP laptops.

    David

Maybe you are looking for

  • How to move conveniently "No. Style" and "Basic Page Style" in firefox30?

    Hello I need to frequently change the web pages between 'No. Style' and 'Basic Page Style'. In firefox 28, it's simple, View-> Page Style-> No Style. But in firefox 30, because I hide the menu bar to save more vertical space, it's quite boring, I nee

  • By the numbers, how do the list tables on the side?

    By the numbers, how do the list tables on the side? It used to be on the side, now it is on the top which is a huge pain.

  • How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

    My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device. Does anyone know how to get a wifi connection after reinstalling factory default DVD?

  • Lost network Code

    I have a WRT54G version 6.  I'm trying to get a new computer connected to the network and I lost my network code.  Everything I read says I need to get the original computer I used to set up the network, open the network control application and then

  • Soundbar for a monitor of E2011Hc?

    Hello I need to buy a Soundbar for a Dell E2011Hc Monitor. The question is, this monitor accepts a Soundbar and if so, which? On the back of the monitor, I think I see the brackets for the soundbar (one on each side): But when I look at the specs for