250 HP G4: HP 250 g4 windows 7 usb drives

Similar Questions

• Help on Windows 98 USB driver

  I need to save files off old my teacher computer, but the computer won't recognize any of my disks to jump when I put them in there. He continues to say that he cannot locate a driver for it.

  I can't use a CD to save the info because the CD drive doesn't open; and as the computer is still running on dial-up for internet, I can't update driver software.

  Is it possible to get my USB works on a Windows 98 computer without connecting to the Internet? I want to just save the files on the Windows 98 computer for transfer to my Windows 7 computer.

  Thank you.

  I need to save files off old my teacher computer, but the computer won't recognize any of my disks to jump when I put them in there. He continues to say that he cannot locate a driver for it.

  I can't use a CD to save the info because the CD drive doesn't open; and as the computer is still running on dial-up for internet, I can't update driver software.

  Is it possible to get my USB works on a Windows 98 computer without connecting to the Internet? I want to just save the files on the Windows 98 computer for transfer to my Windows 7 computer.

  Thank you.

  You have a problem.

  Unlike Windows XP and later versions of Windows, Windows 98 did not come with drivers for USB mass storage devices. See http://www.technical-assistance.co.uk/kb/usbmsd98.php

  Why don't you use dial-up?  People lived with it for a while.  It is much slower that you may be used to, but it's the easiest way to get a driver for your USB device installed on the Win98 box.

  If you cannot (or are not allowed to) use dial-up and can not use the reader of CD, is the Win 98 computer has a floppy drive?  And you have access to another computer with a floppy drive that can connect to the Internet?

  If all else fails, and assuming there is a network card in the box of Win 98, set up a network connection between two computers using a cablecrossover (a crossover cable has the differently wired connectors at different ends).  The following article should help: http://www.windowsnetworking.com/articles_tutorials/wxpwin9x.html (use TCP/IP instead of NetBEUI)

  If the Win 98 box has no network card, you use a "direct cable connection" with a serial cable or parallel. You could buy the software and a http://www.laplink.com/ cable that was once the standard method to transfer files between Windows computers...

• Windows 7 USB driver for HP n213ca after decommissioning

  Just downgraded my new laptop HP n213ca for windows7. I was able to locate most of the drivers, but the Ethernet, usb and bluetooth drivers are still missing.

  Can someone help me find the right drivers?

  Hello:

  Here are the links to the drivers you were asked:

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  USB:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-125314-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• AppData\Local\Apple Inc\CloudKit\iCloud Photos\MMCS folder uses more 250 GB on my hard drive, I can delete, what is this for? consultation offline? If so I don't need it

  AppData\Local\Apple Inc\CloudKit\iCloud Photos\MMCS folder uses more 250 GB on my hard drive, I can delete, what is this for? consultation offline? If so I don't need it

  I had the same problem and it has chewed all my disk space. I have a 64-bit Windows 10 - disk 250 gig. I deleted all these files except those with current date and released the 150 gig. Much better to delete these temporary files to risking a crash operating system running out of disk space.

• Apple iPhone 4S for windows 8.1 usb driver

  Apple iPhone 4S no usb driver for windows 8.1

  Hello syap_pop,

  It seems that you have the driver installed on Windows 8.1 for iOS devices. Use this section of the following article:

  If iTunes does not recognize your iPhone, iPad, or iPod

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  Thank you for using communities of Apple Support.

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

  Presario CQ57-400SO.

  I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

  Oh I managed to download Windows 10via usb, I think that I never had a driver hp support? Updates

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• Pavilion 500-090 USB driver works only with windows 7

  Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?

  Hello:

  Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• Want: My HP 460c & window 10 doesn't have a beautiful color as in window 8.1 driver is faulty

  My HP 460c & window 10 doesn't have a beautiful color as in window 8.1 driver is faulty

  HP please, you have to come with an update of the correct printer driver.

  Yes I tried the other operatring system and found that the would was due to a bad lack of yellow ink cartridge, run the tool clean uo always the same, I'm waiting on a new cartridge to confirm the resolution of the problem.

• Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

  Hello

  I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

  Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

  What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

  Any help will be much appreciated.
  J.Sutton

  Hello

  I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

  http://support.Microsoft.com/kb/932520

  Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

  Here are more details;
  + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

  Concerning

• Qosmio X 500 and question NVIDIA Windows Kernel Mode Driver.

  Hello

  For some time my X 500 will 'freeze' then gives me a black screen before returning to "normal" with an error display window in the taskbar. The read error ".

  "* Display driver stopped responding and has recovered."
  "+ Display driver NVIDIA Windows Kernel Mode Driver, Version 259.12 stopped responding and has successfully recovered.

  Have run a diagnostic on the laptop and tried the NVIDIA drivers updated etc, but it continues to happen.

  Any ideas on the causes AND more to the point HOW to solve this problem?

  I post a screenshot of the error message but cannot find how this is done - if it is allowed?

  See you soon

  Frank

  Hello

  I guess that this is caused by the graphics chip, it is possible that caused graphics card driver problems related to bad entries in the registry or in the worst case the graphics chip could badly run.

  Also found this thread where the user that edbelgium seems solved problems with graph on X 500.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64607

• WNDR3700v2 attached USB drive gets lost in the 10 Windows after a restart

  After I restart my computer run Windows 10, it is impossible to reconnect to a WD 500 GB USB drive attached to my router WNDR3700, on the two (card Broadcom Netlink Gigabit Ethernet) wired and wireless (Broadcom 802.11n network adapter). Even if I "disconnect" the USB key in the file Explorer, I can not re - map a drive letter to it. However, the USB seems to my Tablet (also Windows 10) or Blu - Ray, both connected player wireless.

  I am up-to-date on all the drivers/firmware on the router and the PC as far as I know. Given that the problem occurs when connected both wired and wireless, this indicates a problem with a driver Ethernet on the PC?

  Thank you

  Geordie

  This computer has perhaps need to reformat?

  Trying to back up and format.

• Already have a bootable Windows 10 USB, can I use it with Bootcamp?

  Already have a Windows 10 USB bootable. I converted to an ISO using an Apple Guide file. Bootcamp says:

  In addition, on Bootcamp it shows Windows 7 or later version instead of Windows 8 or later.

  1. Please make sure that your USB Installer is not an installer 32-bit/64-bit mixed. If it is greater than 4 GB, it's a mixed Installer.

  2. Please download an ISO 64-bit of the https://www.microsoft.com/en-us/software-download/home for your desired version of Windows. You may need your product key for Windows 7.

  For Windows 10, MD5sum values

  OpenSSL md5 Win10_1511_English_x64.iso

  MD5 (Win10_1511_English_x64. ISO) = a0d4271b7537732a060909fd39d54829

  OpenSSL md5 Win10_English_x64.iso

  MD5 (Win10_English_x64. ISO) = 23e397a21a9e01f141c64b7e1260314a