2540 all-in-One series: setting up the new printer

Similar Questions

• HP ENVY 4520 all-in-one: unable to save the new printer

  To register, the first thing required is a model #, & when I get mine, the answer comes back - 0 results found. I can go no further, until they recognize the printer they sold to me.

  Hi @elebit,

  Welcome to the HP Forums!

  I noticed that you are unable to save your new printer HP ENVY 4520. I am pleased to see that for you!

  Please, take a look at the Plug, for this printer. Who have the exact model number and try to save again.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

  Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

  Hello @bubbamoorea,

  Welcome to the HP Forums!

  I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

  You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

• I tried to connect my printer HP Deskjet 2540 all-in-One Series to my Dell Inspiron 15

  Separated from this thread.

  Hi Bill,

  I tried to connect my HP Deskjet 2540 all-in-One Series printer to my Dell Inspiron 15 for two days without success.  Can you help me?

  Lenora,

  I have a HP DeskJet 2540 on my Dell Inspiron 1545.

  The instructions from HP work so you should be fine if you follow them.  The CD contains a ReadMe file that describes the installation procedure.

  You must install the software first, and only then connect the printer.  Note that you will first need to install it on a USB connection.  You can change this later if, like me, you intend to use it with WiFi.

• HP Deskjet 1050 all-in-one: cannot parse with the new 1050

  I've been scanning with Adobe Acrobat 8 Professional and a Lexmark printer all-in-one.

  Printhead from the printer become blocked, and fixing was too expensive, so I bought this HP printer. Installed and it is lacking. It prints and copies fine.

  When I tried to scan, Acrobat knew HP was there and he tried the Lexmark. When I plugged on the Lexmark, he systematically planted everything I tried.

  The only change is the new printer. Somehow its installation has made it impossible for me to analyze each device.

  I'm at my wit's end. Help, please.

  Thank you

  Bob

  Hi Bob,

  Acrobat Professional 8 are supported Twain compatible devices, while the HP printer do not support Apple ICA applications.

  As a reference, you can find the following Adobe article:

  Acrobat has ICA support on MAC 10.7 for now with Acrobat XI only
  

  https://helpx.Adobe.com/Acrobat/KB/Troubleshoot-scanning-problems-Acrobat-8.html

  You can scan using Capture of Image or the HP scanning application, then open / import the digitized in Adobe.

  You can find specifications listed below, sweeping an available Twain compatible software interface only for Windows:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c02063036/

  You can find measures to scan with your printer in the following link:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03548786/

  Kind regards

  Shlomi

• DeskJet 2540 all in a series: connection to the laptop using WiFi.

  Installed a new deskjet 2540, use WiFi, on an old desktop running Windows XP. Now try to install it on a laptop running Windows 8.1 but get an error message indicating that it cannot read the software from the disc so impossible to install the printer. Ideas please

  Hello @Mike90, thanks for the reply!

  First of all, here are some Windows 10 resources for you to review;

  • Guide to upgrade Windows 10 for HP printers
  • HP printers that work with Windows 10

  Mike90 wrote:

  Don't think it's my AntiVirus because I run the same on my old desk.

  Security software installed on your computer is designed to protect your computer against threats, but sometimes can block communication between devices and can cause problems when using your printer or install the software.

  A quick troubleshooting technique is to disable your firewall/antivirus and see if the problem goes away. Remember to re-enable your security later.

  You can see the category 'firewall and software provider specific security information' of this site; Security and firewall information if you would like more information on your security software.

  When you have downloaded the software fact all-in-one HP Deskjet 2540 Printer series full feature software and drivers - download version 10 of Windows?

  

  I would try this;

  1. Unplug your USB cable.
  2. Click on the Start Menu, find and open devices and printers.
  3. Right-click on any printer that refers to this model, then click on remove device (so delete all HP Deskjet 2540 s in here)
  4. Then repeat installation, unplugged the USB cable and see if the installation detects the printer already on your network.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• e-All-In-One series C410: HP Photosmart - black print cartridge produces only "ghost image".

  The black print cartridge produces a ghost image.  I installed a new cartridge with the same results.  The photo and 3 color cartridges cartridge are all ok.  I also introduced "clean printhead" and ran a "print quality report", where black could not appear in the report.

  Dragon fur, I rechecked possible solutions in your response, and after a new test of everything that I had already done, I noticed an alignment test.  That was the problem.  I tried to clean the print heads, as a last resort, on my 4 year old printer.  Solution: I bought a new printer.

  Thank you for your wonderfully detailed answer.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Photo Smart D110: D110 Photosmart e-All-in-one series

  Past to Windows 10. will not load the disc to my printer for my Photo Smart e-all-in-one D110. is this a new printer driver so I can use my old printer and not buy a new one!

  Hello Tigma,

  This is the fully functional software and the driver for your model and Windows 10.

  Click on the link to download.

  Full_Webpack - 140.0.408 - 5-PS_AIO_07_D110_140_408 - 5.exe

  I would like to know if there is anything else I can help with that.

• I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

  I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

  Hey mbuyi

  Please visit the link below to download the driver full features

  HP Officejet J4580 all-in-One Printer Drivers

• How to scan using the HPDeskjet 1510 All-in-One-Series

  I Don t know how to scan in a HPDeskjet 1510 All-in-One-Series. Please help me to scan with this printer

  Hi Sotagar,

  The method for analysis is based on the operating system you are using. Here is a page that lists the different instructions based on OS.

  Scan with HP Deskjet 1510 all-in-One

  I hope this helps.

• want to 4500 all-in-one series

  I bought an envy4500 all in one series and after all tests and installation correctly, I had only one problem: when I print from excel files including 'grid' the printer will print all the lines in files. Sometimes jump the line grids, then print two or three grids correctily and back to the grid (lines). I made a copy of old copies and the copy was perfect.

  Thank you

  jbtpa

  Impression in 'best' or 'quality' mode should solve your problem.

  Alternatively, you can also use any other border style in Excel and it should print correctly.

  I would be grateful if this does not resolve your problem, or a problem on something other then Excel, border 'Style 2' in mode 'Normal' or 'Draft' hearing.

  Thank you!

• DeskJet 1510 All - In - One Series: I'm trying to connect my HP Deskjet 1510 all-in-one series to my ThinkPad Chromebook

  I tried to connect my HP Deskjet 1510 all-in-one series to my ThinkPad Chromebook, but I've been so failed to do. I don't know if I need to install an application or something on my Chromebook to make it work. I was also wondering how to determine the IP address of my printer. Help, please! Thank you.

  Hello

  The HP Deskjet 1510 is one USB printer, you can find its specificaitons below:

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5157552/document/c03775352/

  Such a can only be used on a Chromebook as a conventional printer, which means it must be directly connected to a PC or a Mac and registered with Google Cloud Print:

  http://support.HP.com/us-en/document/c04122530

  Kind regards

  Shlomi

• HP Officejet 7612 large Format: Printer e-all-in-one-HP Officejet 7612 large Format printing paper selections not available in the printer dialog box

  Using Adobe Acrobat Reader DC to print the PDF to your computer. Print dialog box displays all the options paper size whatever the configuration by default or the selection of the paper size in the printer configuration. 11 x 17 paper in the printer and configured by default. Only four options are available: letter, legal, A4, and Executive. Nothing is wider than 8.5 "is available, and this so-called parameters up to 13 X 19 printer.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/SG-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select the appropriate operating system.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  The desired print sizes should be there.

  Hope that helps.

• Unable to install HP Deskjet F4500 all-in-One Series

  I'm trying to install the HP Deskjet F4500 all-in-one series software on my 15 HP 8.1 Windows 64-bit machine.  When I run the Setup, during the activity to check system files, I get a message error "cannot find file system' Appdata\Local\7zs39b6\Temp\hpzshl...

  

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi