2545 HP cannot print size A4

Similar Questions

• HP Deskjet Ink Advantage 1515: Printer HP Deskjet Ink Advantage 1515 cannot print size A4

  Dear HP,

  I just bought printer HP Deskjet Ink Advantage 1515 this morning. After arived in the House, I set up the printer much. and I'm trying to print a photo in photo gloss paper A4 180 gr. I put the picture full size A4. but when I print it, the result makes me disappointed. It cannot print to A4 size. isn't that reach the size of the letter. my picture cut at the end of the book.

  I read the specs of the printer before buy you. It is said that the printer can print A4 size. but they do not mention on a Cup at the end of the book.

  My question is:

  • what I can do about the problem? (I tried the regional and language settings, but it does not work)
  • is this hardware problem or a software problem?
  • Can I get my warranty to be replaced by a new and fixed? How?

  I hope that there is solution. help me with that.

  Thank you

  Hello

  The technical specifications list the print margins, the printer may not exceed the margins you can find listed in the paper handling > print margins:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-1510-all-in-one-printer-series/5285089/model/5285090/document/c03775352/

  As you can see below in the section of handling paper, borderless printing is not supported for the printer:

  http://WWW8.HP.com/emea_middle_east/en/products/printers/product-detail.html?OID=5385210&JumpID=oc_r1002_emea_middle_easten_c-001_r0001#! tab = specifications

  This is not a defect, these are the limits of the printer that you can find listed by its specifications.

  Shlomi

• Advantage of ink HP deskjet 2545: advantage of hp deskjet 2545 ink cannot print

  I just bought the HP Deskjet Ink Advantage 2545 and install the driver on my desktop Microsoft windows vista 32-bit, but it can not print and the print also test error. After that, I try to my computer window 7 64-bit laptop and the problem was the SAME, it can't print anything and test printing also error. I tried many way solve the problem, but there is still same, example: 1) select the checkbox hide all Microsoft Services, disable all services and then click on OK and rebbot.
  (2) temporarily disable all Antivirus software.

  (3) reinstall the driver

  4) using print and scan doctor

  BUT THE PROBLEM REMAINS THE SAME!

  

  Hi @TommyHong,

  Welcome to the Forums of HP Support! I understand that you are not able to print to your HP Deskjet Ink Advantage 2545, since your computer running the Windows Vista operating system.  I see that you did a lot of troubleshooting steps already, thanks for that! I would try a different approach, please follow the steps below:

  1. perform a clean boot: How to perform a boot in Windows

  2. now, go ahead and use the System File Checker: use the tool File Checker system to repair missing or corrupted system files

  3 uninstall/reinstall:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software DJ 2545 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software DJ 2545 disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

  5. now move forward and start to Setup the printer to a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series

  Here is the link for the software and drivers:

  HP Deskjet 2540-All - in - One Printer series full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• PIXMA MG8220 default page for printing size is out for 6 x 4, need to letter

  I have a PIXMA MG8220 and default page for printing size is out for 6 x 4, I need it to be paper letter size. I lose a lot of paper and cannot understand how to reset the default values on the individual mobile phones vs. using the printer printer?

  Simon

  Hi simonp.

  To set the size of paper to print on, please follow these steps:

  1. open an application such as TextEdit.

  2. Mount the file and select print or press CMD + P keys on your keyboard.

  3. Locate the PAPER SIZE field, and then select the format of LETTER paper.

  4 search drop-down list labeled PRESETS, then expand this menu and choose SAVE AS.

  5. enter a name of your choice for this setting by default, and then click OK.

  Now we can select the above created the preset in any application you are printing from, with the default paper size is letter.

  I hope this helps!

• 8600 premium print and then gives the error message that it cannot print the document that it just printed.

  It isn't really a problem, just a nuisance.

  Last week I printed several documents from PDF files and print documents.  Once printing has been completed, an error message would be displayed on my laptop that the printer cannot print the document.  I've ignored the warnings and continued, and then the printer would print the document again.  I found that if I clicked on the error message, printing in double stop.

  Since then, whenever I don't print from any program (MS Office, Firefox, Chrome, IE, etc), I still get the same message if the end of the print document.

  Just a nuisance, but if I forgot to point out the error, the doc print again without error message after the second printiing...

  I noticed that the queue, regardless of the size of the document, always freezes on the last page to print before closing.

  I turned and turn it back on and reset the connection to a static IP address for the printer wireless...

  Hello DRS1966,

  Yes, I can understand the frustration of getting an error once printed of your document. I'm glad that's not interfering with your documents but would like to try and get rid of it. Please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it detects errors, or that it cures the problem. I'll watch for your reply.

  Thank you

• Air photo print size

  Re: HP Photosmart Premium C310a... Air printing photos/documents works very well, but cannot print photos 8 x 10 of Iphone4 even after reset of printer preferences.  Air Print by default only for resize photo 4 x 6?

  Hi arthurskier,

  Yes, default AirPrint 4 x 6 and trays photo if the printer has one. You can download the HP ePrint home and Biz app from the Apple App Store that allows you to print photos on your local wireless network and also allow you to customize the print including the paper size settings, type, size of the photo and paper tray.

• Cannot print a2 envelopes

  OfficetJet 8600 Pro running windows 7 cannot print A2 envelopes

  The driver designed for the Officejet Pro 8600 does not support that envelope size.

  However, try to give simple wire Shane_R on how to use another driver. The thread can be found here.

  Try to use the HP Deskjet 9800 driver.

• I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or same prelif

  I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or even listen to excerpts, without borders.

  What is your size of cell on in the print module? Cell size sliders must be completely to the right, and the margins should be set to 0.

• Cannot print illustrator files

  Hello

  •The problem:

  I have some illustrator files - I cannot print. I tried many different things to make impression (details below).

  The files I have problems with all use models (model no standard color chart). 1 group of files use a jpg-model, other models of vector group.

  Those with the vector model does not print (print printer spools, RIP printer file (I checked it on the printer) after this nothing happens, it does ' t get in the joblist). File jpg-jacquard prints only 1 of 4 pages after over an hour of treatment. All files are multi-page files. File sizes are between 20 MB and 80 MB. It is only a minority of the files with problems.

  Version •Illustrator:

  I'm using CS5, some of my colleagues use CS4/CS3.

  •That I tried, failure:

  AI:

  -Flatten layers.

  -Deselected "create a PDF Compatible".

  "- Used the 'remove items unused palette"-action. "

  -I can't select 'Print as Bitmap' when printing under Advanced (it appears gray).

  PDF:

  -Record in PDF format (help with a few files)

  I've tried different settings:

  -Deselect "Preserve Illustrator editing capabilities"

  -Different standard pdf (PDF/X-...)

  -Different compression settings: interpolation of 600ppi/300 PPI/150ppi /..., compression: zip, also tried jpeg.

  -Tried to print PDFs with Adobe Acrobat Pro and Apple Preview.

  -Use advanced > optimization PDF from Adobe Acrobat Pro.

  •Imprimante-info:

  The two printers-netwerk, two Konica Minolta.

  Use the Fiery Image controllers.

  One is a bizhub C450, the other is a bizhub C360.

  Used another more professional printer (bizhub Pro C6500) too much for one of the vector-model files, without result.

  The latest drivers are installed.

  •Compatible, but not a good solution for everybody:

  Export to jpg, using plans 'work' selected, maximum quality.

  It works, for CS4 and CS5 it works more or less well, but in my understanding CS3 does not work with multiple work plans, this is a real problem (copy/paste of simple pages then export all the pages...) So I hope a transverse normal, more elegant solution. It's a minority of the files, but still enough to be a serious problem.

  Thanks in advance for the help!

  I think I would try save on an Illustrator PDF file and open it in Acrobat (I know you've tried this, just stick with me). Once opened in Acrobat, hit print and the print dialog box under Advanced select the impression that the image checkbox.

• Sharp MX-2614n - 10,11 drivers - cannot print

  We recently bought a new Sharp printer in our office - MX-2614N. Unfortunately, I was unable to find the drivers on the Sharp site. Unlike the old model MX-2600N, which prints without fault, I am unable to do this print even printer with a standard postscript driver.

  My Mac with 10.11 can see th printer on network morning and it asks to download drivers or offers standard drivers. Unfortunately no luck.

  Recently, I discovered a package on some unofficial site with 10,11 drivers hidden in MX - C26.pkg, which adds dozens of printer in library/printers/PPDs/happy/Resources you want SHARP MX - 2614N.PPD.gz, dated 11.9.2014, but the printer cannot print even with this printer driver. I contacted the local representative of STRONG, but not luck.

  Does anyone have a solution for this printer - how to print even in a default configuration without any particular add ons (like duplexer, paper extra. storage etc..)?

  I tried one of these:

  http://support.sharp.NET.au/drivers/

  -version 1.6.0.6 to 10.11 26.1.15 - no luck

  http://www.sharp.co.UK/CPS/RDE/xchg/GB/HS.xsl/-/html/product-details-Office-Prin t - 2373.htm? product = MX2614N

  -version 1501b 27.1.2015 - no luck

  Keson wrote:

  I am unable to do this print even printer with a standard postscript driver.

  The new machine has a PostScript printing package? For many brands of printers Postscript kit is often an option and without the SDK installed, you will not be able to print using Sharp or generic Postscript PPD MX-2614 - driver who stands for Postscript Printer Description.

  Note that some devices support PCL as standard. There is a generic PCL driver included with OS X. This driver does not print in black and white and has a default value of print resolution of 300 dpi. But at least it will let you print.

  You can also find that the Sharp supports AirPrint. If you can then you will be able to use the AirPrint driver in OS X, which will let you print in color and print on both sides and even staple (if it has a base unit).

• How can I increase the print size letters on the screen

  Sometimes, printing characters are too small and I need to increase the size (%) before printing a form

  The size of the font displayed on the screen does not directly affect the font of the printed size. The screen size is affected by the change of the Page or Zoom the text Zoom level. The print font size depends on the scale as shown in layout or preview before printing.

  File > Layout Page or file > print preview
  
  100% is the normal setting - it change that you find necessary

• HP Envy 4500: Cannot print the error message

  I just replaced the black cartridge of the moment on my 4500 and the printer will not print. I get the error message is - cannot print. Visit www.hpinstantink. Com for info. I did that but it's impossible to find useful info! Help, please!

  Hi @clairerobinson6.

  Welcome to the Forums of HP's Support. I understand that your printer does not print and directs you to instant ink site. I would like to help.

  The printer is in the instant the ink program. He receives this error for two reasons. The printer has not been able to connect to the servers of HP ink level controls or the number of pages in a long time, or there is a bill pending. Normally when you sign in to your instant account of ink there is an opinion on the matter. If you do not see a notification, try to reach out to the instant the ink Department.

  You can send them a tweet directly from your instant ink account, or use this link to find the appropriate phone number.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• Cannot print from Firefox 3.6.13

  Cannot print from Firefox. 3.6.13. says it's printing, but only a blank page comes out of the printer. Safari works fine, but I like Firefox. With the help of Mac 10.6.5.

  Probably caused by a Bug in Firefox, which is supposed to be fixed in versions of Firefox 4.0. Until Firefox 4 is out, my suggestion is to use the preview before printing and if the preview is empty use Safari to print this page. This extension will allow you to click right into Firefox and open the same page in Safari, so you don't have to copy' only paste the URL.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/open-in-Safari/