27-inch Imac (2011) will play is more DVD

Similar Questions

• 2011 27 inch iMac screen will Dim

  Greetings,

  For the last month, I noticed my screen goes dark suddenly on not the case. During this time he has no use of graphics heavy just reading the news or update notes. I tried to remedy the situation by making the PRAM reset to enjoy and SMC. However, I am quite surprising that a computer that has cost more than $2500,00 would not that way. I researched and found that the probable cause was the LED backlight Board, I also found that the replacement of this Board is very costly and unfair in my opinion.

  I am wrong in my analysis of the members of the LED backlight, is it a reminder for a free replacement. I am disappointed that this is happening on such a machine than iMac 2011.

  Is > iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program ... any help?

  

• Windows Live Movie Maker will play is more story-Board

  Windows Live Movie Maker will play is no longer my storyboard - not even projects that have worked in the past.  Any ideas?  Download the program from Microsoft?

  I have Vista SP2 ver.6.    Movie maker ver.6.0.6002.18273.

  Hello Yrag1956,

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Movie Maker and would be better suited to Windows Live Movie Maker portal community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Thank you

• DVD won't play in the computer, will play in the dvd player

  Hello. I have burned several dvds of our showcase of dance for participants using first elements 14. Because of the length, I did an image ISO bootable first, then he burned from that. Some tell me that they cannot play on their computers (Lenovo laptop/Windows), but it plays well in their dvd player. I use an iMac 27-inch with El Capitan and can not play on my computer either. Does anyone have insight into this? Thanks for your help.

  Ask them to see if it will play in VLC:

  VideoLAN - official page for VLC media player, the video frame Open Source!

• How can I burn a movie on windows movie maker to a cs that will play on my dvd player. It will only play on my computer

  I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

  I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

  =======================================
  Try to import the saved. In Windows WMV video file
  Creation of DVD and burn a DVD-video:

  Windows Vista - burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

• Video clips will play is more - video format not supported

  Please help. I recently transferred an iPhone 4s to an iphone 5. All images and videos were transferred in the shop. I came now to actually play the video and I get this message. "unsupported video format" Please can anyone help. Here are videos of precious I know I should have saved but I did not.

  Hello riley-riley,.

  Thanks for this info and choosing the communities Support from Apple. I know how important to get these videos work again is to you! As I understand it, you can't play videos on your 5 new iPhone that you had on your old iPhone 4S since the transfer of your personal data to your new phone. I have some suggestions to solve this problem and get those videos works again!

  1. first of all, please, import videos from your iPhone 5 to a computer and try to play on the computer. After importation, do not delete or remove it from your iPhone, just to be sure. I also recommend making a backup at this stage, as well.

  Import photos and videos from your iPhone, iPad or iPod touch
  The backup of your iPhone, iPad and iPod touch

  2. If the videos play on your computer after you import, then you can try this copy of the video from the computer to your iPhone using iTunes synchronization. Once you sync videos to iPhone, trying to play two copies of the same video and see if they work.

  Keep your photos safely stored and updated on all your devices

  See you soon!

• DVD will play is more about Tecra M - video memory

  Hello

  I tried to read a DVD this morning and WINDVD player gave me the message: insufficient video memory for DVD playback at the current screen resolution. I tried in Windows media player and I can hear but no video.

  I reduced the resolution to 800 x 600 but I still get the same message
  and anyway, I played successfully DVD several times.

  I can still play notice OK, just DVDs of the drive or folder that fail.

  Anyone got any ideas?

  Thank you

  Chris

  Hello!

  What laptop Tecra you have exactly?

  I think that you must reinstall WinDVD and Windows Media Player doesn t work again why don t have a codec package installed I think.
  So, try to reinstall WinDVD and try another player like VLC media player. It can play a large number of audio and video files.

  Good luck!

  Good bye

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD player on the desktop iMac 2009 will not read the dvd whats the fix

  DVD player on the desktop iMac 2009 went to play DVDs on Yosemite.  What is the solution?

  The first thing to try is a disc cleaning disc. About US$ 5-15 in most computer, office supplies and electronic. Loading slot discs get pretty dirty and this dirt/dust can interfere with proper disc. The cleaning disc is an inexpensive and simple step that often solves the problem.

• My DVD will play. My DVD says disc is bad or needs to be formatted when I try to burn. Backup stops and says back up does not have all the

  I want to backup my computer to an external hard drive but the popup of backup does not have this option.

  Hi Janice,.

  (a) have you tried using different DVD to burn backup files and check if it burns?

  (b) your use of any third-party burning software on the computer?

  (c) what is the size of the backup files that you try to burn on DVD?

  (d) you are able to burn CD/DVD in Windows Explorer?

  (e) you are able to perform the backup to internal hard drive? You cannot save to the C: drive, try to perform the backup on a different partition and check.

  Try to uninstall the burning of third-party of the computer software and check. Also try using different DVD to back up files. I suggest you follow these methods and see if it helps:

  Method 1: run this Microsoft fixit tool:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Navigate to the following location and delete all the files and then try to burn the DVD and check if it helps:

  C:\Users\(User Name) \AppData\Local\Microsoft\Windows\Burn\Temporary file Burn

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/en-in/Windows-Vista/change-where-you-back-up-your-files

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-in/Windows-Vista/which-CD-or-DVD-format-should-i-use

  Hope this helps, if you need help on Windows or the problem persists, please let us know we will be happy to help you.

• How movies I burn in nero 7 it will play on a dvd but computer games player

  I used to use nero 6 reloaded and was not a problem, but my broken drive and had to start using nero 7 ultra and then my probs began

  Foums of Nero are here: http://forum.my.nero.com/index.php?setlanguage=1&langid=en&showforum=2

• After burning .wmv on DVD, it will not play on a DVD player

  Original title: Save as one file other than .wmv

  After that I recorded my video (such as a .wmv file) and burn it to a DVD, it won't play on any DVD players. The saved file can be converted to another type that will play on most DVD players? Or even recorded under one of these files?

  DVD player, that I hooked up to my TV plays .wmv files that I take with my camera. I do not use the DVD program supplied with Win7 however. Roxio DVD Creator. But there are free converters out there. I actually convert mine by default the camera MOV to WMV for distribution by e-mail.

  WMV file converters.
  http://lmgtfy.com/?q=free+WMV+file+converter

  Bruce Hagen ~ MS - MVP [Mail]

• burn my DVDs on my laptop and play on my laptop but it won't play in my dvd player.

  I can burn a dvd on my laptop and I can read the dvd on the laptop. If I try to play the dvd in my dvd player which is connected to my TV, he will not play in the drive.  I can burn the dvd even my daughters laptop, it will play in my laptop and it will play in my dvd player. So, I know that it is not the dvd player. Help, please

  Hi Speedstep,

  In theory,-r is more compatible, but it really depends on the model. I use Verbatim DVD + R exclusively to educational DVDs for the ballet school where my wife works, and have never had anyone come back to complain that the drive did not work. The OP used Imation, which are the second quality rate. So I suspect it's at least a part of the problem.

• Satellite P200-1EE does not play a HD - DVD

  My P200 with HD DVD drive fails to recognize a HD drive (before ask you, this is not a Blu - Ray). It's a UK bought HD DVD. When I start the program of DVD HD Toshiba drive and insert a disc, nothing happens. He will play a standard DVD with no problems. All other functions of the disk drive appear to be good.

  What is the solution to this problem? I made no change of setting.

  The problem is that your HD DVD player firmware is not updated!
  In addition, I would recommend the Toshiba HD DVD Player update!

  See European Toshiba driver page, select your notebook series and date the firmware of the HD DVD player and readers!

• updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  ewcbhc wrote:

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  If you put expensive RAM and/or incorrect RAM then Yes. iMacs are very sensitive to the RAM and you must use quality RAM, more experienced on these forums users use OWC (www.macsales.com) or critical (direct purchase). RAM should also be installed in pairs. If you purchased anything else, then after a report of EtreCheck of your system and we can look for obvious problems.