27 + slice 28 vs ++ Slice - differences?

27 ++: part number 57Y4545

28 ++: part number 0A 36304

What is the difference between these two slices 9cell? Who can I get to W520 4270CTO?

I intend to use it at the same time with my 55 ++.

Thank you

harrisb wrote:

While the batteries that will work in the W530 must have hardware authentication or the machine does not start? Is this a new whitelist item?

The machine will start (with a warning message displayed by the BIOS and the Manager of power), and it will be even not authenticated battery.  The problem is that the machine will not charge the battery not authenticated.  With many new systems supporting Ukraine where you can get to charge to 80% in 30 minutes, it is simply too dangerous to try to load someone spare ebay battery.

Tags: ThinkPad Notebooks

Similar Questions

  • time slices - exercise 2

    Hi guys,.

    one more question about time slices:

    This time I need to establish a correlation between the time slices (start / stop) of employees according to their priority (or importance):

    assuming that three employees approaching and leaving the Office at different times, I want to get all the relevant time with always the highest priority (importance) slices. So if for example the boss (prio 10) is here with an ordinary employee (prio 5 or 1), then we choose 10.

    Here the test data:
      CREATE TABLE "SCOTT"."EMP_START_END2" 
       (     "EMP" NUMBER(*,0), 
         "START_TIME" DATE, 
         "END_TIME" DATE, 
         "PRIO" NUMBER(2,0)
       );
    REM INSERTING into SCOTT.EMP_START_END2
    Insert into SCOTT.EMP_START_END2 (EMP,START_TIME,END_TIME,PRIO) values (10803,to_date('2012/10/05 06:00:00','YYYY/MM/DD HH24:MI:SS'),to_date('2012/10/05 16:00:00','YYYY/MM/DD HH24:MI:SS'),10);
    Insert into SCOTT.EMP_START_END2 (EMP,START_TIME,END_TIME,PRIO) values (10802,to_date('2012/10/05 06:00:00','YYYY/MM/DD HH24:MI:SS'),to_date('2012/10/05 20:00:00','YYYY/MM/DD HH24:MI:SS'),5);
    Insert into SCOTT.EMP_START_END2 (EMP,START_TIME,END_TIME,PRIO) values (10801,to_date('2012/10/05 08:00:00','YYYY/MM/DD HH24:MI:SS'),to_date('2012/10/06 06:00:00','YYYY/MM/DD HH24:MI:SS'),1);
    expected result:
    start                          end                              prio
    2012/10/05 06:00:00  2012/10/05 16:00:00                          10
    2012/10/05 16:00:00  2012/10/05 20:00:00                           5
    2012/10/05 20:00:00  2012/10/06 06:00:00                           1
    looking forward to your answers!
    BR
    Dirk

    Published by: user10939560 on 14.11.2012 11:21

    Hi, Dirk.

    user10939560 wrote:
    Hi Frank,.

    redundant and limit of time slices should be merged (if version 1).

    Here's a way to do it:

    WITH   got_event_start_time AS
    (
         SELECT     start_time     AS start_time
         FROM     emp_start_end2
        UNION
         SELECT     end_time     AS start_time
         FROM     emp_start_end2
    )
    ,     events          AS
    (
         SELECT     start_time
         ,     LEAD (start_time) OVER ( ORDER BY  start_time)     AS end_time
         FROM     got_event_start_time
    )
    ,     got_grp          AS
    (
         SELECT       ev.start_time
         ,       ev.end_time
         ,       MAX (ese.prio)     AS prio
         ,       ev.end_time - SUM ( ev.end_time
                                    - ev.start_time
                            ) OVER ( PARTITION BY  MAX (ese.prio)
                                        ORDER BY          ev.end_time
                                ) AS grp
         FROM       events       ev
         JOIN       emp_start_end2  ese  ON  ev.start_time  < ese.end_time
                                 AND ev.end_time       > ese.start_time
         GROUP BY  ev.start_time
         ,            ev.end_time
    )
    SELECT       MIN (start_time)     AS start_time
    ,       MAX (end_time)     AS end_time
    ,       prio
    FROM       got_grp
    GROUP BY  grp
    ,            prio
    ORDER BY  start_time
    ;
    

    Whenever you want to understand a long query like this, each of the queries under run separately, to see what they do.
    The first auxiliary request, got_event_start_time, creates a result set of all time when someone has entered or left. Each line of the final result set will be a groupd of one or more consecutive lines of this set.
    The subquery follows, events, adds the end_time to each event.
    Got_grp, is where the real work takes place. First, it joins all lines that overlap, the events and the emp_start_end2 to get the highest current priority during each event. Then, it uses the technique of Difference sets to assign an identifier (grp) that will tell us if the events with the same prio belong to the same group. For an explanation of fixed differences, see {message: id = 9953384} and/or {message: id = 9957164}

    But how can you come home

    2012/10/05 05:00 05/10/2012 06:00

    is not in the test data, is it? Have you added yourself?

    Who is in the test data. These are the start_time and end_time of the extra line I posted.

    Published by: Frank Kulash, 14 November 2012 15:26
    Added Expanation.

  • The slice video and Audio at the same time

    Hello everyone.

    When I click on the K control, it dose create a slice in my calendar, I want to create a slice for my Audio, at the same time.

    But whenever I have cut a video, and when I want to delete the part of the slice of the film that I cut, the audio is still there, and I have to use the Razor tool to select the portion cut under the cut film.

    Thank you

    Simon.

    The razor default command (Ctrl + K like you currently have mapped it;) I use Ctrl + B, but there is no functional difference) slices only through the tracks that are being targeted. So, be sure to target your audio tracks for the command works correctly. just click the track selector associated with your audio files (Audio 1, 2 Audio, etc.).

    In CS5, there is a new command to cut through all the tracks, regardless of targeting. Discover the sequence > razor all tracks for it. It's probably Ctrl + Shift + K by default. Note that this will cut everything, securities Optionally you want not cut. Just use one that suits your needs.

  • Satellite Pro M70-113: is the update of the Bios as of 03/06/07 supports slic tables

    Hello
    Maybe someone knows if the update of the bios for toshiba satellite pro m70-113, dated 03/06/07 supports slic tables or not?
    For vista oem installation dvd?

    Thank you...

    You will not be able to find info accurate on the BIOS and what exactly is supported or not. If you just want to install Vista on your M70 I can just say that I installed Vista Ultimate on my Satellite M70-159 (PSM71E) without any problem.

  • Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

    Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

    See if the troubleshooting steps in this article to take help supported:

    If the slide on the upgrade screen does not disappear once you upgrade to iOS 9 - Apple Support

    See you soon,.

    GB

  • HP Pro: How to remove the Virus HP "Slice.

    Just restore system and HP beautiful force WEBslice Ad has take over my computer.  No way anything else that upset.  No way to remove or block.  No matter what I do, this is the MAIN page appears.

    http://www.HP.com/psgesb/TRANS/slices/hpd1c-en-us-SMB-1.0.htm#highlights-slice

    WTH?

    What file can I remove or uninstall on my computer?

    I am beyond frustrated.  Why HP do this for us?  It makes her totally unworthy of trust!

    Yes, thanks, I did malwarebytes and SAS before writing.

    I deleted all the computer HP software (there are several in the programs directory) and uninstall programs as W & uninstall would allow. At least it couldn't be removed.

    I found a hp-redirect on the Firefox icon. <> http://redirect.hp.com/svs/rdr?TYPE=4&s=webslice&tp=iefavbar&pf=cmdt&locale=en_us&bd=all&c=134 >

    I deleted this icon, and everything is OK.  At present, it will however, nutsy, so I'll send this

  • T410 + battery Slice - sleep problem

    Dear community,

    I have a Thinkpad T410 with the following specifications:

    Intel Core i7 620 m

    4 GB of RAM

    NVIDIA nv3100m

    Windows 7 Professional x 64

    I have problems if I go to fashion 'sleep'. If I press mode 'sleep', the t410 go to sleep less than 1 second pulse led on the power button, and the sign of the moon on the back of the LCD turns off. Next time if I turn on the T410, Windows asks me if I will start normally or in safe mode. So this means that the battery or the T410 certainly interrupts the current, and they seem to have no power. But it doesn't happen every time. For example, I give the following:

    Main battery: battery 100%: 100%: "sleep" mode works perfectly

    Main battery: battery 100%: 50%: "sleep" mode works perfectly

    Main battery: battery 100%: 0%: "sleep" mode works perfectly

    Main battery: battery Slice 75%: 0%: "sleep" mode works perfectly

    Main battery: between 60 downto 0% battery range: 100%: standby mode does not work.

    I did this for the moment a long time. I can't give a percentage by exactly, when the sleep mode does not work, but if the slice to 0% and the main battery approximately between 60% downto > 0%.

    I updated my BIOS and also the energy Manager. But there is the problem more far.

    Anyone have the same problem and have a solution for this? I think that behave in the system/T410 isn't normal right?

    Thanks in advance for your help. I look forward to your answers...

    Best regards

    Dear community,

    I know that the subject is almost a year, but I have a solution for the problem mentioned above.

    If you install the "Intel AMT 6.2 management engine Firmware" problem is gone.

    I am very pleased to find this solution. Now I can to each battery charge percentage goes into sleep, even with the battery installed slice mode.

    Best regards

  • Slices about 433 for a minimum function?

    I designed a simple minimum function, which selects two numbers from the smallest. He needs a multiplexer and a comparator. When I compile it with LabVIEW FPGA, it generates me 433 Total slices, 513 slice records and 524 Slice LUTs. I don't understand why these numbers. When I draw it with VHDL in Xilinx get less than 20 slices. Why so huge?

    Thank you

    LabVIEW add bits and bobs on top of your code to enforce data streams. You can do things to optimize your code:

    The following link may be useful:

    http://zone.NI.com/reference/en-XX/help/371599H-01/lvfpgaconcepts/using_sctl_optimize_fpga/

    Also

    http://www.NI.com/white-paper/3749/en

    http://digital.NI.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument

    http://digital.NI.com/public.nsf/allkb/722A9451AE4E23A586257212007DC5FD

  • SanDisk Cruzer Slice USB Flash Drive how to configure

    How to re set up a san disk 16 gb USB Flash drive (Cruzer Slice)

    Thanks a lot, it seems to have sorted itself and works ok once again thanks

  • No switching mode battery slice "sleep."

    I have a T520 (4240, BIOS 1.28) with batteries primary and 27 ++ "slice" of 55 ++. With the main battery on 80% charge the battery slice 8% load, I closed the lid and machine went to 'sleep '. I had not used for a few days and when I finally opened the cover, I found the power had been lost and the machine had to be started cold, losing my previous session.

    While a few days, the battery slice fell to 0%, and then the machine lost power. Never, he opted for the main battery, which was still about 80% of the fees. This is the expected behavior? It doesn't seem fair to me.

    Hi astecker,

    Sorry for the late reply. Since your last post, we have several updates. Grateful if you can try to update the list below and see if the problem persists, if the problem persists so that I can get a case goes with genius on this subject.

    BIOS: 1.39 here

    Power Manager: 3.64 here

    Power management: 1.64 here

    Slice battery firmware Update

    If the problem persists, please let me know, so I can connect one case to engineering.

    JMT

  • Battery Slice T430 problem.

    just got a 42T 4739 battery slice for T430. I get an error message - the battery installed is not supported by this system and wil not fresh. Please replace the battery with correct lenovo for this system.

    27 battery + is not chip authentication and will not work for w530, t530, and thinkpad t430. You need the battery 28 +. The eBay seller was wrong.

  • Cruze Slice 32 GB declaring open, when it is not open.

    Every morning.

    I recently bought a new 32 GB Cruzer Slice and it comes back with the message Sandisk Secure Access is already open, which is not. Delete or restart does not solve the problem, another thing I notice is copied a link to another drive on my computer without my permission. Sneaky, eh! Can question - I remove all the software, with the flash came and simply use it as a flash simple manual copy? Sick of it. Cannot find some way on the forums to solve these problems. Have a nice day.

    "can I remove all the software, with the flash came and simply use it as a regular manual copy flash?"

    Sure.

  • SanDisk Cruzer Slice

    Hello world

    I hope that this will be answered quickly, because it is urgent. I bought the cruzer slice and apparently there a vault with a password. I don't have this need. I wanted to copy a 13 GB file in the main directory, but my system was told that there is insufficient space (this is a 32 GB stick, 29GB of available, it is said). I have no idea why, but I think it's maybe because the vault program (I don't know, seems the only explanation for me). Is it ok just delete everything on it, including the software? Or will it "destroy" my stick?

    Thanks in advance

    Davy

    The problem is not the files/folders on the Cruzer rather the format of the Cruzer, which is FAT32.  FAT32 only supports files up to 4 GB in size format.

    If you can break your 13 GB file into segments of 4 GB that work.  If you can't, then you will need to reformat the Cruzer to NTFS.  Formatting will scan all the files/folders currently on the device so if you want to use them at some point in the future to save them to your hard drive before formatting the Cruzer.

    This fast enough for you?

  • U3 Cruzer Slice and Cruzer Blade available? (SDCZ50 / SDCZ37)

    Hello

    First of all, sorry for my English, I m still to learn ;-)

    We are an official distributor of Sandisk in Spain, we´ve had a few questions about the new units cruzer, slice and the blade.

    Provided that we have understood Sandisk removed the all readers Oct-2009 usb U3 partition and remained as an optional choice, the question is:

    Can we install the U3 technology through the Sandisk U3 installer in any unit of Sandisk Cruzer? Or is there some cruzer models who do not accept U3? We got some customers who bought the Cruzer Blade and reported that they couldn t install the U3 app.

    Thanks in advance for your answer!

    MemoryVal

    Older devices which were manufactured before 10/09 will always support U3 and the user can install it using the U3 Installer. devices manufactured after that 10/09 do not support U3 and it cannot be installed.

  • How to make the sandisk cruzer slice 16 GB run

    I can not begin to use the new sandisk Cruzer Slice because it does not find its driver

    Please take a look at:

    http://kb.sandisk.com/app/answers/detail/a_id/139/kw/flash%20drive%20cannot%20find%20driver .

Maybe you are looking for

  • Why am I being sent received for the purchase that I did not?

    Hello I just got the second email with a purchase on iTunes Store that I have not bought, this time for a Netflix subscription. The last time I just ignored him because I have never enter my details of credit card at Apple before, so there is no way

  • Fans of Envy15 and cd player does not

    I have a craving for 2012-15 with 1 update of Win8.1 and a few days ago, I noticed that there is a newer version of my graphics card, I decided to update. After installation, the screen become black and I could only see the mouse pointer, then I wait

  • Media player download problems.

    I tried to download my music library on my (old) to my current laptop desktop by copying the files on my external hard drive. loading on the Media Player files, but will not play because it gives me a message for all the files that were loaded too ma

  • SystemListDialog in QML?

    A box of SystemListDialog cannot be created in QML?  Only C++?  If it is possible, is - anyone can provide an example? https://developer.BlackBerry.com/Cascades/documentation/UI/dialogs_toasts/system_dialogs.html#pat136... Thank you.

  • PIN-function not

    I made a menu to a master, but now I can't it Center by pinning. The function is obscured. Why? It is a menu made manual.