2800 POWEREDGE BIOS PROBLEMS

Running unix on a poweredge 2800 server - after a reboot to cold system loses date and other settings in the bios - I go into bios reset date and put the info on the disks scsi and everything works fine - what is the bios battery?

Bill

It looks like the CMOS battery.

Tags: Dell Servers

Similar Questions

  • How to report the BIOS problem?

    Hello

    is it possible to report the BIOS problem so that a person of HP it will read and the problem will be solved if all goes well?

    To be concrete, there seems to be problem in BIOS F.02 installed on HP Mini 5103 causes of freeze if it has plugged the USB key with 'recursive partitioning' at startup. As a result, it is not possible to boot from live USB which was created from some ISO hybrids (e.g. direct ISOs of OpenSUSE recent). Since there are not many options to install the system on netbook, I think it is serious problem. My previous netbook Lenovo Ideapad S10 - 3 and also my work laptop and desktop have no problem to start with the USB stick containing "recursive partitioning", so it's certainly a problem (hopefully not feature) this concrete machine/BIOS.

    Thank you

    That's ok on the Bravo, I did nothing to help you again.  This link is for questions of security, but it is also for the firmware, so you can get away with sending them a note here:

    https://h41268.www4.HP.com/live/index.aspx?QID=11503

    - Or call them.

    http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1

  • BIOS problem, how downgrade

    I'm updating the bios to 2.14 to 2.21 on my aspire E1 - 571. MY video ram on version 2.14 was 128 MB and is now on 2.21 64 MB. How downgrade bios 2.14 because 64 MB is bad for the game, when I go to install 2.14 has error message "Comparison of bios problem" Please help, help, help

    Erkedo,

    Avoid any problems flashing the BIOS to an older version. Did you do that there is no way to manually change the video memory setting in the BIOS?

  • Windows XP Bios problem

    When you install Microsoft XP, I seem to be a BIOS problem.  The error message loads up once the disc loaded files, but until you're able to partition the drive.  The error message indicates that the hardware and BIOS are not ACPI compatible.  After reading upward, I tried to correct the problem by what the error message says to do.  First of all, try to update the BIOS.  I called my computer supplier and received the last update for the BIOS of the computer.  I installed it and nothing happened.  I resorted to the second option listed that would press the F7 key. that was supposed to disable the ACPI and force the installation. It does not yet.  I then read a few forums and they said to update a file on the disk XP (TXTSetup.sif).  So I did but nothing seems to happen.  You have other options to get this facility by?

    First of all, check that you have not hit one of the components of the PC especially the memory sticks. If there is anything loose, see the article published below. It might be useful for you.

    http://support.Microsoft.com/kb/307973/

  • Keyboard / BIOS problem

    Keyboard / BIOS problem

    1. when I turn on my computer the active keyboard light came blink and after this the keyboard keys do not work, I'm not go to CMOS Setup by pressing on * F10 key and not saving changes pressing on * F1. And the main thing is that what window opens then work keyboard correctly.

    2. when no keyboard not work start time so how can I update or install the BIOS. Please help me.

    ·        * In the first screen show me this to save F1 and F10 for installation.

    Thank you

    Mr. Islam

    If your BIOS does not keep its settings, then it is time for a new CMOS battery.

  • POWEREDGE 2800 memory/battery problem

    Hello

    The server DELL POWEREDGE 2800 our company with windows sbs 2003 suddeenly server has restarted yesterday and stuck in the POST gives the error"

    Memory/battery problems were detected.

    The adapter has recovered, but cached data have been lost.

    Press a key to continue. "

    I have three times restarted the server by pressing a button to continue. All three time loading of bones preserved for a long time and restarted the same screen of the error.

    ATLAST I turned off the server and checked for any loose contacts according to the suggestion of dell. I removed the disk 0, 2 HHD, HDD3 in channel one o and replugged in and started the server. Same system has occurred. 1 HARD disc is already failed in RAID 5 and the place so that the disc is empty, I suspected may be another disk HARD in the same row is a failure and so I removed HDD 0 and rebooted the server. the same symptom (2003 loaded and stuck). turned off the server ' reconnected HDD0 and removed HDD2 and restarted the server, but the same symptom.

    Reconnected the HDD 2 and disconnected HDD3 after restarting the server, it gives error loading operating system.

    There are disk HARD 4 and 5 two more hard drive HARD drive in another channel 1

    How to recover from this problem and our secure server data?

    Please help me with this because I'm helpless and the server must be brought im production tomorrow

    Thank you & best regards

    Margot

    If your LCD is blue and you get the error of memory/battery on each startup, then you need to replace memory RAID (99% chance that it is rarely a defective battery or the riser).  The operating system will not usually start in this scenario.

    If your LCD is amber and a message about the scrolling ROMB battery voltage, you should replace the RAID battery (sometimes it's because of riser).  The operating system will usually start and work very well in this scenario.

    First of all, stop playing with readers and replace the memory RAID (and battery and lift to be 100% sure).  Once it is replaced, due to all mixture player you have done, you might have a few steps very careful to recover your data and make your table online.  When you're ready to do this (again, it is useless before repairing the message memory/battery), call Dell technical support - it's always free on servers, regardless of the status of the guarantee.

  • Click satellite 10 - upgrding BIOS problem

    Hi all!
    I have a new toshiba satellite click on 10, but when I try to update the BIOS to 1.6 it pops up an error that says "update bios image is not valid in the current bios or flash secure does not support flash secure." What it means? How can I solve this problem?
    Thanks for your help!

    The latest version of BIOS is 5.20. You can get it on the Toshiba site:
    http://www.Toshiba.co.UK/support/BIOS/

    I'm not here on this particular error, just try to install the latest version of the BIOS and make sure you select the correct phone model when downloading (I made this mistake before!).

  • Satellite Pro A210 HDD, Windows Vista & BIOS problem

    Hello

    We have an A210-1 b 3 - PSAFHE-01500PEN - running Vista which has had a hard drive failure.
    We have replaced the old drive SATA (250 GB) with a 500 GB SATA drive and used the recovery disc to install Vista and specific software from Toshiba. We intend to restore our backup data that a Vista is installed.

    That is the problem. We have installed the new hard drive, ran the recovery and after restarting, we got a Windows could not sating error set up the hardware and then restarts. I suspect that the new drive is not recognized by Vista. I looked around and it was suggested to the SATA Compatible parameter value in the BIOS. However, the BIOS (V1.5) has no options for this.

    So, can anyone suggest anything please? Any ideas where I can get the latest update of BIOS (pref one that allows me to create a boot disk and update BACK)? Any help appreciated because she has completely baffled me.

    Thank you in advance,

    Jamie

    Hello

    Seems that A210 BIOS does not support the SATA option, that would help you to switch the AHCI compatible mode. That is why the SATA drivers must be included in the configuration of OS install.

    But if you use the Toshiba drive recover then you n t need to install the SATA drivers from the Toshiba drive recover contains the image where the SATA drivers are already included.

    Now the question is why the Vista Setup program cannot complete.
    Have you used the good drive recovery for the right portable model.
    I read in a number of threads that people used bad disc

    Well, it would be interesting to know if you can install the Windows operating system using the disk from Microsoft. On the other hand, you can try to format the HARD drive before launching the recovery disk

  • Satellite A350D - error meassage apear everytime I log and BIOS problem

    I have two problems here on bios and any error message please help me...

    Thank you very much.. Merry Christmas...

    Now, every time when I ' am turn my lap top before she continue to windows there is an error message always appearing.

    Intel UNDI, PXE - 2.1 (build 082)
    Copyrirgth (c) 1997-200 Intel Corporation

    For Realteak RT8101E / 8102E PCI Ethernet Controller V1.09 (080602)
    PXE - E61: Media Test translation, check the cable of

    PXE - MOF: output of the PXE Rom

    Honestly, I ' am afraid of what he will do to my computer...

    Question:
    What is the cause of the problem and how do I fixed this?

    Before I encounter this error message, but after I opened my laptop that has been started.

    Why I opened my laptop?

    I have here some information that might help trace when this problem started...
    before there is no password set in my security settings on the bios, I put the password in it. My mother borrowed my laptop so I decided to remove all the passwords that I put to him.

    In my bios security settings
    In the old password, I put my password then I leave empty the new password and retype the new password then I save and exit...

    After that I can't go to my bios it still asks to put a password but I wonder because I already deleted it, I tried to put the password that I used before but I does not work...

    I searched the internet on how to recover a bios password and I tried some of these suggestions
    I am using Toshiba Satellite A350D - 20 K I've upgraded to windows 7 64 bit, I believe that there is no utility driver for my OS password so I can not use utility password, based on a suggestion that I read

    I can reset my bios by removing the cmos / battery from inside my computer bios laptop so I decided to open my laptop but suddenly I have not found all the batteries inside...
    After I opened my laptop, that was the time I started to encounter the error message...

    Dear friend

    Now the situation is more complicated. To be honest, that certain parts of your reports are not logical for me to be discussing this.

    As you know in the BIOS boot options where you can set the boot sequence there. With other words, you can define which device should be the first, second and so on. To start notebook BIOS check this defined order and try to start the operating system. If the first boot device is not found for some second reason for notebook control device. If there is no portable bootable option check the following.

    This message PXE occurs when the laptop cannot find the boot device and try to start the LAN (network card) device. Why does this happen? I put t know what the problem is here.
    At this point, I have to say that I m really confused when you say that you can continue to windows after this message appears on the screen. How do you do that? Can you start preinstalled OS now or not?

    BIOS password
    This method with the removal of battery can run on desktop computers, but with laptops is the history a little bit different. If you are not able to remove or change the password of the BIOS, then you have a big problem. Now this can be done by only authorized service.

  • Bios problem A50-512 1.30

    Hello

    After the bios update version 1.30 (via the updated version of windows, on the site of official support from toshiba) I get lost of the bios/menu pages. BIOS inform me that pages is 1/2, but I couldn't pass by using PgUp PgDn to other pages. Most of the very important function of get lost, it's just a date/time and the password is displayed, that's all.

    Could someone help me? Thank you.

    brgds,
    Radek

    Hello

    Have you had problems during the update of the BIOS? Y at - it a statement of navigation at the bottom of the screen?

  • Satellite C660 - wave fan constantly BIOS problem

    I have a Satellite C660, PSC0LE submodel.

    The fan (CPU) is constantly growing and turn off every minute or so. He is strong and extremely intrusive / boring. It is occurs regardless of the load / CPU temperature. I have seen references to this topic, and some people have suggested that a BIOS update to fix it.

    I updated my machine to the latest version available (1.40), but it is not fixed.

    I see that this (PSC0LE) submodel has not later than some of the other variants (there is a version 1.8 for some other submodels C660) an update of the BIOS and I think the fan problem is solved in that.

    Toshiba intends to solve this problem on the PSC0LE via a new BIOS, or y at - it another way to stop what is really distracting.

    TIA,
    Dan

    Please try to reduce the speed of the cooling fan change advanced power options > Toshiba power Saver saver > cooling method.

    For normal use I recommend to use the balanced feeding and management game, cooling method to lower the level. It should reduce the activity of fan cooling.

  • HP p6-2003w: looking to put a graphics card in my pc but I learned most of the newer cards will have bios problems

    I've been watching different cards and moved between a couple to then say that they may not compatible with my older hp desktop computer. My bios version is 7.06 friend, 16/08/2011. If anyone can recommend or list of compatible with this pc graphics cards, please let me know. I have a new cx600 power supply, so it won't be a problem.

    Are the cards that I was going to look more

    Gigabyte radeon r7 370

    ASUS geforce gtx 750 ti 2 GB strix

    I was told that these cards will be not compatible because of the UEFI BIOS. I looked, and unless I'm missing something I legacy bios.

    Shaun-wrote:

    While the 2011-12 cards might work? If all of the recent cards require UEFI why would call tech support change or are there exceptions?

    Here I had known about it in time, I would have gotten something better. Thank you for responding.

    Yes, there may be exceptions depending on the manufacturer.  Some of them may have updates VBIOS that will allow their cards in order to work with a Legacy BIOS.  I know that EVGA has a few updates for their cards.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Satellite 2800-400 Bios Update - will not start

    Hello
    I hope someone here can help me.
    I just did an update of the bios on a S2800-400. The machine worked perfectly up to this point, has never had a problem at all. (should have been better I guess)
    Anyway, he is been 192 MB of ram and a 60 GB drive upgrade and works happily in this config for some time. The change I wanted was the ASPA compliance, but for some reason, the machine pours just as soon as he's trying to start now. The update of the bios has been according to the instructions and successful that the messages show. Do not know what to do now... Where can I find the old bios files? return to orig
    Thanks in advance

    Hello

    As far as I know old BIOS version can be installed just in Service partner. Another possibility is to try to reinstall the OS from restore CD. Maybe using.

  • Equium A210 - after update BIOS problems connect to MSN Live Messenger

    Hello

    I just installed the latest update of the Bios for my Equium A210, as has been the first time results attempted this \i watched carefully and everything seems to go correctly but the laptop is restarted, it beeps and showed a checksum error, I chose the option to reboot with 'Default settings'

    Since that I got problems to connect to MSN Live Messenger and I wondered if this might be something to do with the Bios Update, it is also possible to 'come back' to the old Bios somehow?

    Thank you
    Lee

    Hello

    your question isn't really a related problem of the machine. The "Checksum Error" is normal after each update BIOS since the checksum of the BIOS which consists the BIOS settings and the version of the BIOS is not correct due to a modified version of BIOS.
    So, the next time that you update your BIOS you will get a "BIOS checksum error" again. Worry not Don t, it s nothing serious.

    With regard to your Messenger:
    1. uninstall the Messenger
    2. download the latest version from the MSN site
    3. install a new
    4. have fun

    Welcomes ;)

  • Tecra M4 - 150 3.50 BIOS problem with USB

    Hello

    I've updated my Tecra M4 with the latest version of the BIOS and I have the following problems so far:
    1. controls on the Logitech V20 speakers don't work anymore (they work with other computers is not hardware failure).
    2 setpoint application takes about a minute to start, it takes approximately 1 minute for menu appear when right-click on it in the status bar.

    Both devices operate normally when it is connected to other computers at home (on XP and Vista).

    These USB failures appeared immediately after upgrading the BIOS to version 3.40 to 3.50.

    Is it possible to get the old BIOS back - 3.40? Where can I download old BIOS?

    My Tecra M4 runs on Vista Home Premium.

    Hi mate,

    sounds are really weird. Unfortunately, there is no chance to recover the old BIOS. Your only options are:

    1. the google search or find another user who performs a backup of your BIOS
    2. try to update your chipset drivers, etc, which might help your USB issues
    3. contact authorized service partner that should help you with the BIOS.

    Greetings

Maybe you are looking for

  • can I have a job in you re company

    Thanks a lot for you first time

  • What capacity of the HARD drive in 1670CDS

    New, I HAV Satellite 1670CDS with Phoenix BIOS ver. A 1.07.My drive HARD broked down. I have to buy a new one. What capacity of the HARD drive will be detected BIOS corectly? How many GB of hard drive I can buy? Thank you very much.

  • which is the best Web site program

    Which is the best site that I can buy, it's easy to download changing SKU

  • Reference to Struct to DLL (library function call)

    I have two functions written in C, which takes the reference to a struct. Statements: IpAddress_Parse (IpAddress, address const kChar * text) ConnectIpAddress (connection, const kIpAddress * address) typedef struct IpAddress{int version;address to un

  • How can I delete games W7

    How can I remove Windows7 games? Not only the usual way (unistall it on the control panel) but I mean true removing games W7 so that can´t childrean activate again.