2848 hangs at "standalone", managed led flashes

Hello

"PowerConnect 2848 power on but does not start, crashes at the AUTONOMOUS UNIT", 192.168.2.1 does not. It may be a hardware problem but I would like to try flashing via xmodem - this is a last hope, despite the fact that, initially, I see "Decompressing SW of image-1 100% OK ', then 'mode of operation - mode is managed. HW Polska is 00.00.02.

I tried to enter the Menu of Advanced Start (Shift Ctrl 6) to clear the flash and download the new firmware but switch request password. Does anyone know what is a default password for advanced to 2848 boot menu?

Thanks in advance!

I apologize, I had touched previously not Ctrl + Shift + 6 when you are connected to the switch in the lab. This time I tried using Ctrl + Shift + 6 and asked for a password. The password that worked for me was "troya". I would like to know if this password works for you. If you continue with this method, be sure to save your serial number, MAC address, you have to reenter this information once you have chosen this option.

You can be able to achieve the same goal with a less invasive method, selecting option 2 in the start menu. This option erases the flash file. Then, you can use option 1 to load the latest firmware.

Keep us informed.

Tags: Dell Switches

Similar Questions

  • Tecra S2 - power and battery LED flashes - no start

    G ' Day at all.

    I have a TECRA S2 under XP SP3.
    Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

    I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

    Tried several times with the battery inside and out with the same results.
    I have stabilize power before removing or installing battery.

    Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
    See you soon
    kb3500

    > Everything was going well until I went to a place of friends with her and plugged to the power
    Did you use the right adapter?

    To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
    the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

  • Toshiba 22L1334G - green LED flashing and TV does nothing

    Hello, I have a 22L1334G and I had my tv problem is that every time he has cycled from st - by situation is that the first tuning has been activated that he had just bought. Do you want to download the latest version of the software on the web that corresponds to the version V3, 6 3 and now my camera is left with the Green LED flashes and does nothing. Could someone help me.
    A welcome message

    Same problem with 32L1334DG

  • Satellite Pro M10 cannot start properly - AC LED flashing orange

    Hello

    I have a weird problem that I can't solve.

    (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
    (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
    _________
    When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

    I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

    I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

    My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

    Do anyone know how to solve the poblem? Thanks in advance.

    Hello

    These problems are very rare and shouldn't t happen if hardware or software is ok.
    Power LED blinking orange means there could be a hardware malfunction.
    It is a code flashing microphone and a technician can be read.
    This code must be translated into the hexadecimal digit.

    But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

  • AT200 led flash does not work after upgrade ICS

    Hello!

    I know not why, but after the upgrade to ICS, I realize that the rear camera led flash lights.

    Anyone have this problem?

    Thank you!

    Hello

    Have you tried to reset the AT200?
    Do this

    Check the updates of the Service Station once more
    Someone posted a new update available

  • Apple tv led flashing quickly?

    Apple tv led flashing quickly and does not

    Read this:

    Get help with audio, video, or power on Apple TV - Apple Support

  • Satellite L500 is OFF and the Green LED flashes if hooked on sector

    Help!

    I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else

    Hello

    What indicator do you mean exactly?

    DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

    The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

    Also if there is a failure of memory Power LED repeatedly flashes
    0.5 sec and off 0.5 sec
    If there is a problem with the slot A the LED flashes two times orange then green once
    If there is an error in the B slot, the LED flashes orange green once then twice
    If there is error in the slot A and B the LED flashes two times in orange and green.

    But if the power light flashes green only, I guess there is a motherboard problem.

  • led flash notifications

    Hello

    with my job I can't get any sound or vibrate on the phone. I need an LED flash to let me know I have mail. can anyone help?

    Try the settings > general > accessibility > Flash LED for alerts. I do not know which warns that it covers, but it's worth a try. -AJ

  • Satellite Pro 6100: LED flashes at a certain frequency

    Mentioned this problem in another article

    Power adapter gives green LED and charge the battery. So far so good, but...
    After pressing the button ON / OFF, nothing happens. Do not use is not the main adapter but the battery gives no change.
    Only the DC IN - LED flashes at a certain frequency:
    short-long-short-Short-Short-Short-short-long,
    Morse code:.-... -.
    in BIN: 01000001

    Nothing happens... Sytem stays down

    I bought a new battery but no change.

    What can be wrong?

    Manusje

    The blink code is displayed if there is something wrong with the hardware.
    Code: 0100 0001 should read it back 1000 0010 = 82 h

    The Toshiba service partner should know what is the meaning by mistake 82 h
    You should ask him for help.

    Please check this forum announcement:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12799&MessageID=46635

  • Tecra 9000 - DC led flashing light 01001110

    I have a problem with my laptop, it's a Tecra 9000. When I press the button start power
    Tour LED from yellow to orange. Then the LED flashes 8 times. SLSSLLLS = 01001110. Peut
    can you tell me what this error code means?

    Thank you for all your answers

    Post edited by: fanatic

    I solved the problem by connecting the 2 PCBS together.

  • Tecra 9100 don't start - power suplly LED flashes

    Hi all.

    I have a problem with a laptop Tecra 9100. When I push the button start the suplly power LED flashes orange for eight times to make a quick stop in flash 2 and flash 8. Can someone explain to me this error code is this?

    Thank you for all your answers

    Hello

    If electronic power supply detects that some portable problem send a blink code. This code allows you to identify the problem. I can't tell you much these codes, but what I know for sure, is that you need professional help.

    Please contact the service allowed in your country and explain the problem that you have.

  • Satellite A10: Battery-LED flashes with AC

    Not too long ago I bought a new battery for my laptop. About a year and a half he worked well. But one day I just couldn't start Notepad without AC. I thought, just dead battery. If I set up the adapter sector, but the next time, the laptop didn't start either. With AC, no problem.
    So I charged the battery, and when Windows says, full battery, and the Green LED, I unplugged the AC. But then the computer laptop completely stopped, as if there is no battery.

    Now, it's this way: it is not serious what know Windows. The laptop does not start without AC. After a disconnect from the AC, the battery led flashes orange fastly. When windows is running, it only slowly blinks orange.

    Where is the problem? Anyone know a solution?

    Hello

    In my opinion, there are two possibilities.
    Either the battery is dead and needs to be replaced or to power portable electronic malfunctions.

    The first possibility is not serious because the battery change should help solve this problem, but if the power of electronic books is not working properly, the entire motherboard must be replaced.

    I think that it s advisable to contact the ASP in your country, because the guy has found the fault very quickly and could provide the best solution.

    Good luck buddy

  • Satellite L40 - 15 G - LED flashes

    Hello, I have this problem, the toshiba satellite L40 - 15G, junt does not illuminate.

    I already remove it from memory and try the power up, nothing.

    I already measured AC adapter / DC, 19v is ok.

    pressing the power button with battery on adaptor taken 30 seconds and nothing.

    The only thing appens, led light, the power light green and orange battery light, appear, and the battery orange flashing with green led power light.

    I mean, seers green rest power one and the battery led flashes, I unplug the AC adapter, e reconnect and the 2 green led watch on and orange, in a few seconds, stars blinking the led battery led (orange) and rest like this and nothing of power up... help please.

    I already try universal adapter and nothing, in addition to this question... really helps.

    And nothing moves fans nothing, only the led lights.

    Can someone help, please.

    Greetings to you all

    Also on my side i have the power to change, and the back side of the Commission, have nothe pass as the power switch, if a press led ligh e stops, I'm talking about, I have everything ready dissamble boad ok, on my hand, I found this switches... what he for?

    And some one take the battery CMOS, in frist place I guess is not a problem, only the Don t of the bios, save the changes I did, plase can one help everything, everything...

    Find the testicles or, thank you!

    I can tell you with certainty what s wrong with your laptop, but I guess that its a serious problem of motherboard.
    Perhaps the electronic power supply on the motherboard is affected.

    Fact is that this isn't the battery problem. Why? Because the laptop should work without the battery, but comes to connect to the network.

    You said that the adapter is OK. Well, it means that the battery and AC adapter isn't the troublemaker you said that memory was also tested.
    So this isn't memory problem and, therefore, I think, it could be the related problem of motherboard.

  • Re: Satellite L750 does not turn on - LED flashes

    Hi guys,.

    Can someone help me please!
    I just bought a laptop Toshiba Satellite L750 last week and it won't turn :(

    The wing forward system indicator is flashing but I'm not sure wat it is: P
    Nûby - I know, but its all new to me.

    Also my lappy does not turn and stop automatically last night in the middle of using it.

    The fan seems to be surging so:(meh son seul nouveau... s'il vous plaît aider!!!)
    Karma

    Hello

    If the LED flashes then a serious hardware problem has been detected on the motherboard.
    I think that the guarantee must be valid because L750 model isn't very old so don t time in bulk and get in touch with the Toshiba ASP in your country.
    Guys should help you for free if the warranty is valid.

    For me it doesn't look like a main part (motherboard) need a replacement.

  • Upstream the LED flashes constantly

    Why the LED flashed upstream nonstop? Is this a problem?

    I connected to a cable modem the following:

    Desktop

    Router NETGEAR Wireless

    Base Talk phone service device.

    Thank you

    Thank you! Problem solved!

Maybe you are looking for

  • card mother iPhone 5s

    Hello Recently, my 5s iPhone fell in the water and I gave it to a technician, he told me that I need a new motherboard... you want to know if apple sells and how it is if they sell it or I'll buy it at someone's home etc...

  • On the T60 display screen does not work

    Hi, guys! I have a problem. I'm not able to use the screen on my Lenovo T60 1952 - CTO (1952-WJ3), Intel 945, Windows XP 32-bit. I tried everything I installed the correct video driver Intel, installed Hotkey drivers on the Lenovo support site. I see

  • How to unlock documents so I can fill out the grey areas?

    An employer sent me an appacation to fill, and when I click on the gray areas of put my information on it a sign said that this unauthorized change because the document is locked. I tried too many days to unlock the document but can't. I send this ap

  • HP ePrint Option in the list of printers.

    Hello.. I want to know how HP ePrint option works. The latter appears in the list of printers in the print dialog box all by choosing printers available in word/excel or any other window print operation Your help in the topic should be very much appr

  • Temperature of the GPU 103C on Latitude E6420

    Hi, I recently started the Test PassMark Burn-In version 7 on my i7-2630QM Latitude E6420 with Nvida NVS 4200 M 512 M card. During the test, I noticed that the temperature of the GPU is about 103C and software reported "Test failure" due to the high