2D axis graduation Bug in reports (Tiara 2014)

Similar Questions

• First HP axis line bug in Boolean expressions (Adv. Graphing App)

  When the graphic representation of an inequality and excluding a part of it using Boolean expressions, there is a bug where the first will be graphic axis lines are part of the solution by using 'AND NOT '.

  An example of this is that if you were to graph a circle of RADIUS < = 5 and remove a circle of RADIUS < = 4.

  Example:

  V1:=(X^2+Y^2<=5^2) AND NOT (X ^ 2 + Y ^ 2 < = 4 ^ 2)

  Axis lines X - there exist in the excluded (X ^ 2 + Y ^ 2 < = 4 ^ 2) and can be traced back as if it were part of the solution of V1.

  Interestingly, if V2 is set to be equal to V1 (X - 0.5, Y - 0.5), axis lines are no longer aligned with the axis of the grid, but are rather shifted-0.5 on the X and Y as well as the rest of the V2.

  In this case, the equation can be modified to work around the bug by removing the NOT and change the sign of the circle radius 4-more of:

  V1:=(X^2+Y^2<=5^2) AND (X ^ 2 + Y ^ 2 > 4 ^ 2)

  Does anyone know if there is a reported bug?  Where I might be able to look to see a list of known issues?

  Thanks for the detailed examples. It took me a while to see what you were talking about, but once I did I had the info the graphic calculator expert.

• CreateDataFileHeaderAccess (Tiara 2014)

  Hello

  in Diadem 2012, I used the DataFileHeaderAccess command to access the properties of the root of my TDMS files. The properties are at the lowest level (not in groups or channels). In 2012 my code looks like this:

  Set oMyDataFileHeader = DataFileHeaderAccess ("test.tdms", "TDMS", True)
  
  oMyRootPropVal = oMyDataFileHeader.RootPropValGet ("Property_xyz")
  
  If (InStr (1, oMyRootPropVal, "search_string", vbTextCompare in) > 0) then...

  I do not understand how to use the new control. I tried different things, but nothing has worked for me. For example:

  Set oMyDataFileHeaderAccess = CreateDataFileHeaderAccess
  
  Set oMyDataStore            = oMyDataFileHeaderAccess.Open (files (i), "TDMS", True)
  
  Call the MsgBox (oMyDataStore.RootElements (1).) Properties.Item (1). Name)

  My properties do not appear in the RootElements branch (1).

  oMyDataStore.RootElements (1). Properties.Count also returns the right size in my case.

  Thanks in advance!

  Karlheinz

  Hi kawosch,

  Try this in DIAdem 2014 and later versions:

  Set TdmHdr = CreateDataFileHeaderAccess()
  
  Store of value data = TdmHdr.Open (files (i), "TDMS", True)
  
  The value DataRoot  = DataStore.RootElements (1)
  
  Set DataRoot.Children = DataGroup (1) ' a group
  
  Set DataChannels = DataGroup.Children ' first group channels
  
  MsgBox DataRoot.Properties ("Property_xyz"). Value

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Bug in reporter Panel updated with the property Value Chart

  Hi guys,.

  Defer to what the Panel update property is set to true and chart is updated with the help of node "Property value", data are not updated graphics. Capture of the block diagram and VI (2014) screen gasket.

  Is this a known bug, and is there any fix for it?

  

  Thank you

  Knockaert

  I have not tried running your code, but here are some possible solutions:

  1. There is a primitive to write the value of a control by index (added in ~ 2013). This is designed to be used others live too and should work like a local.
  2. You can send data using another way (like a queue, etc.).
  3. Use the Ctl Val.Set method.
  4. Do not use a chart. Use a chart and manage the buffer yourself. You can find some examples if you're looking for graph XY.

• BlackBerry Smartphones for technical assistance: a bug to report...

  I am reporting this bug here because I can't reproduce it or remember it quite clearly, but a few days ago, I had an application while turning the phone in landscape mode. The result was a keyboard rotated covering the left side of the screen at all. The problem remained in the following application I started upward. After I left apps a few times and turn the phone several times, the problem disappeared and has not played since.

  There is obviously a bug related to redraw a place, but since I can't reproduce it I can not associate it with a specific application. I just wanted to bring support to aware of this problem.

  Thank you

  -Donald

  Hi wbemasterpdx and welcome to the forums!

  The latest official version of VERIZON's le.75 you listed.

  The version.83 referred to as 'the flight', is an unofficial OS that has not announced for Verizon.

  There is the assumption and expectation that Verizon will be releasing it.

  JSanders made the excellent point that Verizon may not even win,

  but choose to wait for a release of the latter. Basically, you need to learn more about the version.83 and

  decide if trust you him or not, and if your needs will be met by it.

  It is your decision to load or not. The link is attached.

  Attached also is a link to the FAQ showing the device OS updating procedure.

  Thank you

  Bifocals

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

  http://CrackBerry.com/OS4-7-0-83-leaked-BlackBerry-storm-9530

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&thread.ID=3984

• Tiara - 2014 &gt; 2011 (DOWNGRADE)

  Hello

  We bought DIADEM 2014 (1xBASE/2xAdvanced) and our client uses DIADEM 2011.

  As a result, we had different problems and as to downgrade our version of DIADEM.

  Is this possible? How can I get the old version and my license is also work?

  Thanks and greetings

  Alex

  Hello Alex,.

  You can use an older version with your new purchase (you may use 2014 or any previous version of DIAdem, but not both at the same time, please check the license agreement of the software).

  Older software versions OR can be found here:

  http://www.NI.com/downloads/

  Just enter the name and version of the software you wish to download, i.e. 'DIAdem 2011' in the field of research to the above URL and choose the version you want to download, then install.

  The license file you received with your version of 2014 should work with previous versions of DIAdem.

  Depending on the modules OR the license agreement found here: http://www.ni.com/legal/license/ you can install an earlier version of the software that you own:

  Upgrades; Previous Versions. If the software is an upgrade, you can use the software if you have a valid license to use the earlier version of the software, and you may not use the upgrade both of the earlier version of the software at the same time. You can choose to use an older version of any software delivered and licensed under this agreement rather than use the delivered software and a license under this agreement ("software"), provided (i) you have a copy authorized by the earlier version of the software. (ii) all use is pursuant to and in accordance with this agreement; and (iii) Notwithstanding any provision of this agreement to the contrary, in no case NOR will have to support any version of the software, including the provision of applicable software key codes or key to material other than the version then most recent of the delivered software.

  I hope this helps.

  Otmar

• Newbie - waveform graph axis graduation issue

  Hi all

  I'm new to studio of measure (v8.0 with .net c# 2005) sorry if this question has been answered 10 times more, please feel free to point me to a previous thread.

  I have a request to:

  drive voltage analog sampling at 10 Hz reading 1 sample per tick.

  standard waveform graph axis X and Y and a plot as a collection of doubles.

  So far, it's something pretty simple and I can get all this work in the code example.

  My problem is that I want for my X axis to read between 0 and 1800 with the major divisions of 100 and minor divisions = 50. I would like for my actual graph however contain 10-point increments, so that would mean that there will be 500 points between each minor division.

  I looked down through the properties of the axis and I can't enough find the properties that I need to set.

  Can someone help me please.

  Thanks in advance.

  Steve

  Hi Jamie.

  Thanks for the reply. I spent all the update yesterday my system of measurement studio 2012 + Dev Studio 2010.

  I put these settings, looking more closely at my data, I have a problem with my data acquisition analog voltage so I'll search through my solution and start a new thread, as I'm getting 3 times more data that I need, so it is causing my chart to be wrong.

  Thanks again.

  Steve

• Right axis graduations and negative numbers

  Has anyone else noticed that when you have a Y axis on the right side of a graph and showing ticks, it can be confusing because positive numbers look like negative numbers?  I played a bit with custom formatting, numbers, such as adding space before the number.  Other known improvements?

  Thank you

  DaveT

  You can change the color of the labels. That could make it a little clearer that it is not negative.

• How to reverse the axis graduation

  I am a beginner in adobe illustrator help, and I just need to know how to make the axis, say the category axis, in adobe illustrator from maximum to minimum...? How to make my own scaling?

  Maha,

  I'm afraid that leaders and axis are entirely immutable, at least in the way (I think) you mean.

  In CS5, the y-axis was reversed and it is possible to unreverse it, but freely change the axis and leaders was never a real option. You can configure your own leaders as work and turn them into guides, but that would be only something added by you, not used by Illy.

• Go to the shortcut next marker of a bug in first Pro 2014

  The shortcut keys Shift + M and Ctrl + Shift + M to switch to markers takes you to the next edition or marker, whichever comes first.

  I found that using shortcuts to navigate to the next in the panel mounting marker will guide you to the next cue point or change, not to the other marker as it does in first Pro CC.

  If I missed something, I'd like to know. Otherwise, this seems to be a bug in the new software.

  Hi ThornieG,

  This works for me on Mac. You can try trashing preferences?

  Thank you

  Kevin

• APEX 4.0.1 bug - interactive report - ORA-12899 search bar

  Hello
  
  There is a maxlength = "2000" attribute on the apexir_SEARCHelement. The value of the attribute must be 255.
  
  The AJAX call returns the following JSON object:
  
  + {'dialogue': {'uv': true, 'line': [{'V': "failure of Widget < br / > ORA-12899: value too large pour column"APEX_040000"". ""}]}} "" "WWV_FLOW_WORKSHEET_CONDITIONS '." " {{[{"NAME" (actual: 326, maximum: 255), < br / > spreadsheet "}]}} +.
  
  Is it normal that I don't see any error message (dialog box)?
  
  
  Thank you.
  
  Louis-Guillaume
  -----
  My Blog: http://www.lgcarrier.com
  APEXFramework: http://www.apexframework.com
  APEX Québec French Community: http://www.apexquebec.com

  Louis-Guillaume,

  Just an update. This bug has now been fixed and will be available in our next group of hotfixes. This was fixed by changing the maxlength to 4000 to let in a search string of up to 4000 characters, and then modify the code that built the value filter name, such as if it exceeds 255 characters, we we substring and adds «...» "at the end to show that it is longer that can be displayed.

  Kind regards
  Anthony.

• Possible bug with report PPR sort on the login page

  Hi guys,.
  
  I created a report on the login page. Links for sorting, pagination and columns seem to not work.
  
  Here is an example on apex.oracle.com: http://apex.oracle.com/pls/apex/f?p=22519
  
  A very simple example with all the default settings on the table of demo MATERIAL. I guess it's releated for not having a valid user on page 101. Sorting preferences are stored by the user.
  
  See you soon,.
  Dietmar.

  Hi Dietmar,

  Anthony has considered this matter and this behavior is limited to the login page, i.e. the page mark you as the "session invalid page" in your authentication scheme. If you make a copy of your example page, paging and sorting would actually be working very well.

  Kind regards
  Marc

• New bug to report

  I tried to remove our 'Library Interiors Test' site and I couldn't at this remove the administration panel. The tab to REMOVE the site was still grayed out. This needs to be addressed. I think the bug is triggered when you have no files of ice inside the directory that has been assigned.

  Hello Nathan,.

  You can delete a site if you are the administrator, the user only, and there are no invitations pending for the site. You need to remove other users and pending invitations before delete Web site will be available.

  Please let me know if this is the case.

  Best regards
  Corey

• Bug? Illustrator CC 2014 and parameters of the pixel grid does not.

  Hello

  I noticed that in Illustrator 14 CC when I make a new web document with 'align new objects of pixel grid"selected, as I work in the document any of the new forms that I would actually align to the grid without enter me the transformation Panel and selecting the option for each new form manually.

  Is it a new parameter in 14 I'm missing? Obviously it is not a totally disabling behavior there is a work around, but it of still pretty annoying and slows down my work flow. Any help or insight is appreciated.

  Right, new tool Rectangle Live objects are free to align it on the pixel grid until you release them expanding their.

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments