3 GB MD033 Time Capsule data rate lowers up to 5 MB/s during the transfer of large files

Similar Questions

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Access the 4th generation Time Capsule data remotely in Mac and PC

  Hi all

  I intend to log in case Apple support, but my Service and Support coverage is already expired > _ <.

  Apple PC does not support mobile devices like IOS or android, so in this top, I'll focus on Mac and PC.

  Appreciate if you guys could give me advice on how to set it up properly.

  Material and Configuration:

  -ASUS RT-AC5300

  Firmware version: last 3.0.0.4.380_3341 - g25420f5

  IP: 192.168.1.1

  -Configured Port forwarding, Port 548 to 192.168.1.85 in ASUS router

  -Time Capsule from Apple 4th generation (Firmware version: 7.6.7 last)

  IP: 192.168.1.85

  -Cable for direct LAN connection between TC Apple and ASUS router

  I can access my Apple TC LAN for PC and Mac (for PC, installed the Base Station Agent from the airport, for Mac, I access it via the Finder with credentials for password)

  Tried several times to set the TC to be able to access remotely to both Mac and PC platform, also read many articles, no luck.

  Grateful if someone here can guide me on how to configure it so that it works correctly.

  Screenshots below for Apple TC settings:

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/base%20Station.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/Internet.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/wireless.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/network.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/disks.PNG

  Thank you very much!

  Kind regards

  Terence

  In your Mac, in the finder, use Go, connect to the server.

  Type of AFP://yourpublicIP

  Download your public IP address of the router asus news... remote WAN you should use DDNS... iCloud is useless... disable in the TC... It does not work behind another router for most people.

  But you must use the public IP address or DDNS address... It is available in the Asus firmware. Best is to buy a static public IP address from your ISP... This is the only reliable method... is worth a bit of money on a dynamic IP.

  This is unnecessary for Windows computer... Access SMB is usually blocked by ISP and Windows does not support AFP.

  Please post your pictures directly here... It's so much easier, then, for us to see.

  

• URGENT - Data rate "TOO HIGH FAILURE" - BUT this isn't the two videos, it takes 9 subtitles tracks! Help, please!

  I'm a standard definition DVD authoring using Encore CS6. I imported two videos high definition (1920 x 1080) (63 min and 4 min.) directly to a calendar. There are 9 subtitles.

  I have converted video high-def exactly like these while encoding several times with success. I use this custom setting: Codec: MPEG2 - quality: 5 - VBR 2 pass - Progressive - Min BR: 7.2 - target BR: 8, Max BR: 9 - 23.96 EN matches source. Due to the fact that I used this predetermined dozens of times, I don't think lowering the Min, the target or the Max BR is going to solve the problem of data failure rate.

  I am inclined to believe it's 9 subtitles after that review "Data rate too high failure" messages here.

  As ALWAYS, I'm on a deadline to customer.

  Okay, this preset has always worked in the past, but I would have thought you were pushing things with him.  Subtitles can be the proverbial drop of water!

  I had problems in the past with that high bit rates and also during the definition of quality to 5, instead of 4.  For example, I always use 4 quality and will never more than 7 for target BR.  Even with these settings, I had problems earlier this year with a chronology which contained a series of 20 JPEG images - there were always reluctant to the second jpeg, and I had to down to 6.5 before it was OK.

  Have you tried a lower BR?

• Date system resets to 2002 after a stop during the night

  I have a Dell Dimension 4550 with XP operating system purchased in 2002. Computer work fine except after having turned it off during the night resets date and time system in 2002. After resetting in the configuration screen, it will keep the date until I stop from one day to the next one up to 2002. The error message only in the file is The Core Services service AG could not start due to the following error. The system does not find the specified path, how can I fix this problem

  When the system date and time are incorrect, then is a good indication that the battery on the motherboard needs to be replaced.

  the battery from the motherboard is also known under the name of the cmos battery and the bios battery.

  There are instructions on the net how to replace.

  most of the time its pretty simple to replace and the battery can be purchased where they sell watch batteries.

  You can remove the battery and get the model number or search for it in the manual of your computer or your manual online computers at its place of origin.

• Windows 7 hangs during the transfer of data from one drive to another

  This problem was pestering me for a long time, well over a year.

  When I transfer data from one disk to the other (generally large amounts), the computer crashes and I get a blue screen or it just restarts.

  Initially, I thought it was a faulty hard drive, so I replaced that, but the problem persisted. I ran diagnostics of smart drive on all my drives and no problems have been picked up.

  Then I replaced my RAM assuming there that all. The problem continues.

  Then I replaced the video card. The same problem.

  I then upgraded to windows 10 and the problem became more acute, so I rolled back to windows 7.

  The SSD has the latest firmware, the latest graphics card drivers.

  I think now it is one of the following two issues:

  Either my SSD drive that contains the operating system or motherboard?

  Someone at - it ideas of how to diagnose precisely this problem or how to solve it? Would contribute to a new facility?

  PC: Windows 7 SP1, AMD Phenom II X 4 965, Kingston 16 GB 1866 MHz DDR3 Non - ECC CL9 DIMM (Kit of 4) XMP beast series - HX318C9T3K4/16, AMD Radeon (TM) R9 series 200, Asus M4A87TD/USB3 motherboard

  Pilot, verified and associated usbfilter.sys from Advanced Micro Devices Inc. USB filter driver.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Also and important you need to update this driver since 2005.  It is a known problem in win 7 (ASACPI.sys)

  Pre 2009 this driver version is a known cause of BSOD.
  
  Please visit Asus tek computer Inc. - support - drivers and download p7p55d the
  http://support.ASUS.com/download.aspx?SLanguage=en&m=P7P55D%20Le&p=1&s=32&OS=29&hashedid=e7zic83pvqsr80lm

  Scroll to the utility category, then scroll down to the "atk0110 driver for Windows XP/vista/windows 7 32 & 64-bit" (it is about 12 down).
  Download and install it.

  Go to c:\windows\system32\drivers to check and make sure that the file asacpi.sys is stamped 2009 or 2010 (not before).  If you are using Win 8 there are at least a 2012 version that is needed for this.  If you can't find it on the site of ASUS you can download using windows update.  Read about it here

• Phone call during the transfer of data

  Hi, the app I'm developing sends and receives large pieces of data from a server. During data transfer, if I phone the device running the application from the phone call fails to connect. It is only when the application has completed the transfer of data that a phone call can be connected.

  Is there a way to get the phone call to connect?

  The application was developed as a moped based on portability and is executed on a v4.2.1.94 platform 2.3.0.77 Pearl

  The transfer of data should be interrupted by the wireless network to allow the call to come.  Which network see you this on?  I commend this report to the carrier.

• Transfer rate slow during the transfer of data on HARD drive

  I tried to solve this problem, but if I found similar questions, I have found no valid solution.

  I transfer files on a windows 8OS my Transcend hard drive. He has connections USB 2.0 and 3.0.

  whenever I try to transfer files on the hard drive, it works very well and quickly up to 5%. As soon as the copy of the file reaches 5%, speed decreases rapidly until it reaches 375 kbps and flows to 0 before returning to 375 kbps, always not to transfer any data whatsoever.

  I tried a few solutions without satisfactory results.

  I tried to transfer files on the pc or the pc itself to check if the problem was on my hard drive also. This is to copy the files fine and good intra-pc, but fails to copy to the hard drive.

  Basically, the computer hangs after completing 5% and stops to copy, although always playing 375 kbps speed, which, even in itself, is too slow...

  kindly give me a solution to this weird problem.

  Former title: slow transfer HDD

  Thank you for your response.

  It has proved to be a slightly different problem, and if you're interested, the problem was something with the interface between the computer and the hard drive via the usb port.

  When I connected the hard drive to the USB behind the cpu, it worked perfectly fine.

  I do not know too well, I understand the problem, but I'm glad that's solved.

  Thank you for your attention.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• Time capsule as external hard drive

  Can I simply move my films and documents through the viewfinder to use it as a drive external hard time capsule from apple?

  An 'external' drive is one in which the Player connects directly to a Mac... like a USB or a FireWire drive.

  The Capsule is a reader of 'network', which means that it connects to the network router, the Mac then connects the network to the time Capsule.

  The difference. Please keep in mind that the time Capsule is designed to store backups of your Mac using the application Time Machine on your Mac.

  While other data may be stored on the Time Capsule, it is not a good idea to do so.  One reason for this is that users sometimes want to move the data from their Mac at the time Capsule to create more space on the hard drive to the Mac. Once that data has been moved over the time Capsule, users then often delete data on their Macs.

  Big mistake. When--not if... Time Capsule has a problem, the only copy movies or documents that the user flies over from their Mac is on the time Capsule... and now that the data are not available and will be probably lost.

  A much better solution would be to connect a USB drive or FireWire directly to the Mac and then have Time Machine back up the Mac and the USB to the time Capsule.  In this way, you have 'original' data on a drive and "backups" on another drive... the minimum it takes to a backup plan.

• Time capsule

  My time capsule stopped without any reason. Anyone know about this problem?

  You don't mention which model of time Capsule you have... but the 802.11ac current version 'tour' of the time Capsule has been known for power out of himself on occasion.

  If the problem persists, there is really no "difficulty" replacing the time Capsule.  There is a guarantee of one year on the Time Capsule, but if indeed you have AppleCare on one of your Macs, the Capsule is covered up to 3 years from the date of purchase.

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• News Time Capsule, who am I clicking / moving from the old to the new

  I am installing a new time machine.  I can't find anything that clearly explain what exactly I'm clicking and dragging from the old to the new.  It States in the article apple in the Finder to drag the time capsule backup disk image to the new original airport.  I do not see that whatever this is called image backup drive when I'm in the Finder.  I have the following:

  OS X El Capitan, version 10.11.5

  MacBook, late 2009

  Airport Time Capsule, 1 TB, think its 3rd generation

  Here is the link to the apple site I use for instructions.

  https://support.Apple.com/en-us/ht204078

  When I click on the time capsule (when connected via Ethernet), I see a yellow folder called data. Data are referred to as a sharepoint under type.

  When I double click on data, Finder displays the content on my time machine which are as follows:
  -' of a lizardson MacBook"it's a sparsebundle
  -' of a lizardson MacBook 1"is a sparsebundle

  -3 or 4 files that I created to copy things from my computer not apple at the time machine and back to my mac

  I also noticed that after I double-clicked on data I see an icon on the desktop, title given (with the icon that represents the data on a time capsule).

  In Time Machine preferences, when I click Select backup disk, call it data (and has the same icon as the one on the desktop).

  The State of instructions to click and drag in the finder... but think (which is probably not correctly) I'm docking time at my office - and just above machines drag this folder 'Data' on a new via the Office of the former?

  < double post deleted by Tesserax >

• Encryption of the existing backups on Time Capsule

  I have old backups on my TC since 2009. I need them and I don't want to lose them. But I also want to encrypt and have access to all backups in Time Machine, because of private and confidential data. This procedure might work?

  • Open the Time Machine pane in system preferences.
  • Turn off time Machine then click on the button "Select Disk... ».
  • Remove your current backup disk.
  • Then, simply select the drive as your backup once more and check the option "Encrypt backups" and enter a password for the backup. Apple will now encrypt the entire disk backup - including your previous backups.
  • Finally, turn on Time Machine, and you're all set!

  http://www.mactrast.com/2013/07/how-to-public-how-to-encrypt-time-machine-backup s-with-os-x.

  Thank you!

  In theory, this will work.  In the practice, this work probably, but... and that's a very big BUT... it's going to take forever and a day to encrypt all the backups of the old man, which is something that the article forgot to mention.

  Even if you have your Mac connected to time Capsule using an Ethernet cable... it will take days and perhaps more than a week for the initial process to complete, depending on the amount of data you have on the Time Capsule.

  A lot can go wrong over the days and days of a backup, so if you decide to try this... Make sure you have at least a copy or an Archive... of all the data on the Time Capsule disk... before... .you start the encryption process.

• Error search server old name of sharing of time capsule

  I recently had to replace my Time Capsule and by creating a new, I used a slightly different name for the share where the time capsule will be back up my macbook.  Now, I get an error popup to the effect of "Server"XXXXX Time Capsule"server not found  Maybe it's because the server is unavailable or... "Well, it is not available because I have a new time Capsule and I am using a different name for the backup share.

  Can someone help me so that this pop up goes and the computer will stop looking for part of the defunct time capsule?

  Did you remove the old path in the preferences of Time Machine that instructs your Mac where your old Time Capsule?

  If you do not, then the Mac will continue to seek a Time Capsule that does not exist and the report that he can't find it.

  Open Time Machine preferences

  Click Add or remove disks

  Select the old Time Capsule disk. under backup disks... that could be called data, unless you have changed the name

  Click on remove the disc

  Restart your Mac and recheck things.

  IF you have not changed the name of the new Time Capsule data, then you will see two drives two named data.  In this case, remove the two data disks.

  Then, the old time Capsule's power off, restart your Mac and set up Time Machine again by choosing the new Time Capsule disk.