3 monitors listed in the Device Manager on Tecra A6 PTA60E

I have a PTA60E A6 under Xp Pro SP3 with all updates.

I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

How to get back to showing just one of each?

Shaun

Hello

I have 2 different laptop with Win XP and Vista pre-installed.
In both cases, the three monitors are available and listed in the Device Manager.
I guess there is nothing wrong with the system and the entries are correct.

You don't have to be worried about that ;)

Tags: Toshiba

Similar Questions

  • Second Hard Drive not recognized / climb (but it IS listed in the Device Manager)

    I have a HP Compaq DC7800 convertible mini tower running than Win 7 Pro 64-bit

    I installed a second hard drive, and while I can see listed in the Device Manager, it is not mounted.

    That is to say, it is not in the computer > field at all.

    The second hard drive is a Hitachi HDT721032SLA360 ATA Device

    Under the hardware ID, it is said: IDE\DiskHitachi_HDT721032SLA360___ST2OA38E

    I thought it was a driver problem. Device Manager indicates that it uses the Microsoft 6.1.7600.16385 driver.

    I can't find a Hitachi driver for this player. My understanding was that this drive would NOT need drivers.

    I have it in the plug of P5 (I think it is P5, it's at the end of the cable with the primary hard drive) and I have a data cable sata from the sata port on the rear of the disc in the slot sata on the motherboard next to the slot in the place where the main in drive is plugged.

    The only sites that list the drivers for this drive are all spam (thanks, google) sites.

    What I have to change something in my Bios?

    Thanks in advance.

    If the drive is listed in the device but not 'computer' Manager, it must be mounted or a new volume must be created. Please see HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • not listed in the Device Manager webcam...

    Hello..
    I have a Toshiba satellite A305 S6916
    Windows Vista SP2
    I've never used my webcam... then I went to use and found the Camera Assistant Software and when you click on it... He says that the webcam is disabled (well enough) or not found... so... I went to the Device Manager to see if she was there... There is no imaging device listed... no webcam at all... everything I tried failed and nothing seems to answer my problem... Help, please... No Chicony or whatever it is listed

    Hello

    Check in (Setup/BIOS/CMOS) settings as you start - usually F2 then attention screen - see if it
    is a switch off your camera.

    Go here and download the latest drivers for the camera for your model and version of Windows.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2205370&RPN=PSAGCU&modelFilter=A305-S6916&selCategory=3&selFamily=1073768663

    Check with Toshiba support, their drivers online (update or reinstall) and their forums.

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp Toshiba - Forums
    http://laptopforums.Toshiba.com/

    ------------------------------------------------------------------

    These are the usual methods to install the drivers for the device.

    Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
    Click on it and on the tab of the driver is version. Now, click drivers update (which cannot
    nothing that MS is far behind the certification of drivers). CLICK RIGHT on the camera.
    UNINSTALL - REBOOT - it will refresh the driver stack.

    Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
    the camera software (if not more recent get the same).

    Just you'd go to Toshiba Support and get the driver for your model laptop.

    Go to your model.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Good time to get some other updates here.

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
    pilot.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable driver facilities in
    Windows updates, that leaves about Windows updates but it won't install drivers
    who will be generally older and cause problems. If updates offers a new driver can
    HIDE (right click on it) and then go get new ones manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

    I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

    Hello

    Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
    1st in the boot order (remember to put it at the time where the fact).

    Then put in a DVD to boot Windows and see if the driver works.

    If it doesn't then it's a hardware problem.

    =======================================

    If the drive has worked in the test above, that these can help:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My DVD RW disappeared. It is not listed in the Device Manager either.

    I tried deleting the upper and lower filters.  That did not work.  He did not allow the reader to turn well.  I opened the computer to check the water and that's fine.  What can I do?  I called the store that installed and they said that the pilots are on VISTA and there was nothing they could do.  I don't know what brand of DVD it is.  On the invoice they have listed black DVD RW.  It has been installed two years ago and has not been used very much.  Thanks for the help.

    Randy

    Hello

    1 reboot just in case.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • DVD player will not play anything but is listed in the Device Manager

    DVD problems

    My DVD drive is listed in Device Manager but will not play anything and does not appear on my computer. I tried to install the driver, but an error message says the driver installation failed.  I use Windows 7.  Any ideas?

    Tried this?

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    The problem occurred after you update or install something?

  • should there be a network card is in the Device Manager list in windows vista

    Im having problems with my router belkin, wireless light is not on there is a driver of NIC installed on my computer to make this work im on windows vista

    Hi Carole-AnneJones,

    1 did you make changes to the computer before the issue occur?
    2. What is the brand and model of your network adapter?

    Method 1
    Yes network adapter should be listed in the Device Manager. Yes, need driver installed on the computer network adapter to get the active network adapter. You can try the steps from the following link:

    Network adapter problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Network connection problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Method 2
    I suggest you to download and install the drivers for your network adapter on the manufacturers Web site.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Windows controllers USB 8 not on the Device Manager list

    Bus controllers series not on the Device Manager list. USB ports not working do not. I tried equipment difficulty and said could not find drivers for multifunction device clicked on fix not found the drivers for it. could use a little help with that.

    USB windows 8

    Hello

    Sounds like hardware and you cannot resolve hardware with the software. Check with the system
    Manufacturer of support, their books online, the diagnosis and ask in their forums (if
    There are). Or check with a real computer store (one who does on its own in-store service
    This brand and model of laptop).

    Remember that you can not resolve hardware with the software.

    =====================================================

    Troubleshooting you can try:

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Windows key + X (or right click in the lower left corner) - (Admin) command prompt

    C:\Windows\System32\ >

    At the prompt, type in SFC/scannow above
    (There is a space between C and /)

    How to run the command "SFC/scannow" at startup or in Windows 8
    http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

    -----

    Then run CheckDisk (chkfdsk/f/r)

    File (formerly Windows Explorer)

    Right click on drive C: - Properties - tab tools - error checking - Check

    Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
    http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

    How to check a drive for errors with "chkdsk" in Windows 8/8.1
    http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for your devices (can have
    zero or more than one) and top - right click UNINSTALL.

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

    This KB shows XP how to and methods of Vista and Windows 7 are identical (and
    Windows 8/8.1)
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer.
    as well as all USB devices that you previously used. Run Options and tick three 1
    are there choices to see if any.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    ------------------------------------------------------------------------------------------------

    Install USB 3.0 and other USB devices
    http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

    Hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Set up your PC - configure your devices
    http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

    Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    What happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    ===================================================

    If necessary:

    Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
    settings) or even a restore.

    Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
    (new installation remove all).

    How to restore, refresh or reset your PC
    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    How to create a system image to refresh your PC in Windows 8
    http://support.Microsoft.com/kb/2748351

    How to update Windows 8/8.1
    http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

    How to reset Windows 8/8.1
    http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

    Hello

    "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

    Can some give me a link to download the cd-rom driver and help make my USB device work?
    On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

    Please help me

    I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

    Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

    As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

  • Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

    Hello

    I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

    Can someone offer me some advice please.
    Thank you
    Trevor

    Hello

    I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
    I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

    You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
    After this procedure, you should test the device if it will work.

  • Satellite A350 - FM tuner appears in the Device Manager?

    I have a FM tuner device, but I don't see that he listed in Device Manager. I checked hidden devices and it does not always show.

    How to see it in the list of drivers in the driver manager? (Why she get hidden well?)

    Where this device get its drivers or is it without a driver and only works with the tuner NXP software and the antenna

    Thanks for any help on this

    Hello perfection,

    Do you mean a FM tuner Satellite A350 internal or external one?
    As far as I know the Satellite A350 doesn t have FM tuner

    If you have an external FM tuner have you installed the driver for it? If so it should be listed in the device if Manager she s connected to the laptop.

  • DV6409ca No. Wireless and three device Base system in the Device Manager

    I have a DV6409ca SNcnf73202t7 and ran Windows XP on it flawlessly for about a year.

    Last night I asked my laptop and this morning I woke up to the orange light of death on the front of the computer for the wireless and three newspapers of device Base system in the Device Manager. They run:

    Bus PCI 7, device 5, function 3

    Bus PCI 7, device 5, function 2

    Bus PCI 7, device 5, function 4

    I tried making restoration of the system, the removal of the chipset drivers / wireless/network and reinstall in safe mode and the search for solutions to many other people tried to make their wireless work.

    Any help would be appreciated. Thank you

    Hello:

    You must download and install the Ricoh 5-in-1 card reader driver support for your laptop and driver page.

    Go to Device Manager and expand network adapters.

    Is the model of your wireless poster card he or she has completely disappeared from the Device Manager, does not come under the section of the network cards, or in the General list of devices such as a network controller?

    If she disappeared from the view, 99% chance the connection from the motherboard to the card slot plugs into is fried.

    This is a very common problem with the dv6000/dv9000 models.

  • WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

    Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

    Hello

    I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

    http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I can't connect to the network using the Wi - Fi connection. In addition, the Device Manager is empty.

    Device Manager is empty and I can't make wireless connections more

    If Device Manager is empty, check article to see if it will be useful.

    Article number: 311504 - no items appear in the Device Manager list when you open
    http://support.Microsoft.com/kb/311504

    Perhaps because the service Plug-and-Play is turned off (disabled).

    Please reply back and let us know if that is the case.

    Thank you

  • Insuffecient privileges to install the drivers from the Device Manager.

    Windows XP Pro SP3

    "You don't have sufficient privileges to security to unistall devices or to change device properties or device drivers. Please contact your site administrator, or logout and log in again as an administrator and try again. "

    This message appears for me when I try to install a driver Ethernet from the Device Manager, even if I am connected from the only available on my user accounts Admin!

    I tried re-formatting of windows, but does not choose the CD drive niether shows the start menu when I start the machine.

    any suggestions please?

    or any other required information?

    Thank you very much.

    It's part of the problem that I do not in the BIOS, I know that many make the CD/DVD of my first startup. I just can't make the first boot from it! What about the second problem which I can't make changes in Device Manager.

    Thanks for your reply.

    Using a portable OEM version or office? They have total control over your system? You can only use it for the calculation of daily life.

    If you can not enter the BIOS so no way to change the boot device priority.

    Better, you contact the OEM.

    How are therefore continue on you can't get into the BIOS? Have you tried several times by pressing "Del" or the "F2" key during startup (when the first time OEM or any screen logo into your monitor after restart or reboot)?

    S.Chatterjee

Maybe you are looking for