3.o Ralink bluetooth drivers works only on windows 8

Similar Questions

• USB Bluetooth adapter works only on windows 8

  Hi, I have a PC running windows 8. My hama-USB Bluetooth adapter does not work. I mean, I have it plugged in, the drivers have been installed automatically, I even installed the drivers on the disk. The bluetooth adapter is displayed in my devices, but I can't use it at all, if I am looking for bluetooth, it shows me nothing useful.

  Thank you very much

  Philippe

  Hi, I also had the same problem. Found the solution by downloading and installing "Bluetooth Stack for Windows by Toshiba" of

  http://support.Toshiba.com/support/viewContentDetail?ContentId=3461138

• Satellite A500 - some drivers works only on Windows 7

  I have a new (Dec. 2009) Satellite A500-12W (PSAM3E-00Y00FN5) I updated to Vista 64 bit for Windows 7 64 bit.
  To ensure that I have the latest drivers, I tried to update all the recommended drivers for this model with Windows 7 64 bit to nordic.computers.toshiba - Europe.com.

  However, the Intel chipset utility, nor the ATI display driver managed.

  During the installation of the Intel chipset utility, I get an error message indicating that my system does not meet the minimum requirements. Instead, I was able to install an update from the Download Center INF utility of Intels for my game of chips (Mobile Intel GM45 Express chipset). So my question is, what are the minimum requirements for this Intel chipset utility, or is it not the right one for my laptop?

  The ATI display driver installed itself, however, I get 2 error messages when starting upwards in my event log:
  Source: Atikmdag, event ID 52236, CPLIB general - invalid parameter.
  Source: Atikmdag, event ID 43029, DAL - display is not enabled.

  How can I fix?

  Hello

  First of all, you must update the BIOS!
  There is a new BIOS for the Satellite A500 PSAM3E. This time it s 1.50 - winner

  After the BIOS has been updated, you must use the Chip Set Utility downloaded from the Toshiba European driver page it s a v 9.1.1.1019.

  The latest ATI display driver is 8.634.1.

  Please note that all packages must be unpacked first!
  Don t try to run all the drivers when the package is compressed!

  In addition, you could update the driver in Device Manager.
  Go to Device Manager, mark the device and choose Update driver.
  The first option will update automatically the driver!

  If this will not succeed, you can use the second option that lets your for pointing the driver files downloaded from the Toshiba page.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Bluetooth works only with windows 7 ultimate

  I'm going round in circles trying to get the bluetooth to work

  Model: Sony vaio VGN-Z11VN
  Windows 7 ultimate x 64

  When I go, control panel, add a device, he finds nothing. Bluetooth devices are turned on and discoverable. I tried downloadding the broadcom device driver, but it doesn't seem to do anything when I run the downloaded file. Help, please

  Hello

  I suggest you to contact Sony support, ask to provide drivers updated for the Bluetooth device.

  http://www.Sony.co.UK/support/en/contacts

  I hope this helps!

• USB dongles wireless works only on Windows 7.

  I would like to make this as brief as possible. I have Windows 7 Ultimate x 86, core i7 cpu, 2 GB of ddr3 memory, card mother p55.

  I followed all procedures driver: install the drivers then device, the device drivers, install device then go to Device Manager and have disc etc. No matter what I do, device drivers say that they work, but I can never turn on the device. When I click Activate, it says 'activation... enabled' but it never does!

  When I get out of the unit, he said now activated for 1 second, then disappears. I tried two different USB dongles, GW-MicroN and a Buffalo WLI-UC-GN (both using the ralink chip).

  I used Windows 7 drivers, nothing is done and have used new devices even more recent drivers and others. This sounds like a glitch in Windows 7 with USB dongles, I even tried it on my friends W7 X 64, same exact problem. Other times it gives me a blue screen. Please help, thanks.

  I don't have the security protocols listed in the properties of my adapter.

  In fact, now I bought ANOTHER dongle, and it has the same exact problems as the other two, which seems to be a problem of Windows 7 I have read many people having this problem. The news that I bought is a GW-USMicroN-G.
   
  Strange how only I can make it work is if I plug my iphone with tethering, then the dongle works AFTER this procedure. Care to explain this? And also, how can I use my dongle without possibly killing my iphone with an overload?

  Thank you.

  P.S., the site says it is compatible with Windows 7, the box says Windows 7 top, drivers are Windows 7 ETC and I made all forms of driver installation.

• Touchscreen driver works only under Windows 8

  Install Windows 8 on HP Touchsmart 520 is really a nightmare. Usually, the display driver installation procedure and Voltron Touchscreen product error 9998 drivers. Oddly, I managed to somehow work around this by using a different display driver (some beta-version of Intel), but it was buggy. Since the reinstallation of Win 8 I can't to install more touch screen driver. Given that the Touchsmart series sells on its touchscreen capabilities and given the fact that HP relies on the Microsoft OS is not only slightly irritating that HP has so far not been able to provide drivers of devices that work well with Win 8 Release Preview. What solution do you offer me? Wait? Back to Win 7?

  The pilot (Nextwindow Voltron Touchscreen) updates automatically after the installation of Win 8 RTM when you only run Windows Update routine. At least in my case it did, and it works fine.

  HP Touchsmart 520, win 8 RTM x 64 Pro (Volume, active key by the KMS server; in the case that sounds Chinese to you: ask Uncle Google; this German page has all the information you need: http://www.boerse.bz/hard-software/microsoft/windows-8/1168581-windows-8-rtm-final-build-9200-informationen-und-diskussion.html).

• Intel Wimax 5350 works only with windows 7/t400

  As someone who uses the Server 2008 on my desktop, when I received my t400 a few days ago I hesitated at the idea of using vista.  so I decided to download and install windows 7 64-bit (Vista 32 bit... I did an install own good... I think).  I haven't heard of anyone having problems with the drivers wireless in windows 7 and, indeed, intel States on their site that windows 7 will automatically install the drivers for the card 5350 wireless.

  Unfortunately, during the installation of windows 7 was complete the drivers were not installed and I don't have access to the internet.  I therefore had to take my Office Wireless usb adapter, then plug it to access the internet.  Windows Update has not fixed the problem.  so I installed the visa of intel 64-bit drivers and windows told me that my wimax device has been recognized, the drivers have been installed, etc.

  except the wireless card still does not work!  He is currently under listening network cards as area network/2 connection cable unplugged/intel wimax link 5350.  I do not understand... should not it listed as being a wireless network connect as is my usb adapter?

  I think that the problem might be that in Device Manager, I don't have a driver for the controller network, serial port pci or pci simple communications controller.

  It is quite frustrating and I really regret not putting more thought in this installation of windows 7.

  Thanks for the help

  I have a T400 with 5350 Intel and Windows 7 x 64, I downloaded and installed the

  Intel PRO / Wireless and WiFi Link drivers only for Windows Vista * (3298 KB) and the

  Intel® utility connection WiMAX PROSet/Wireless for Windows Vista * 64-bit (9206KB) from the Web site below.

  http://Downloadcenter.Intel.com

  Furthermore, my "Intel(r) WiFi Link 5350' and ' Intel WiMAX Link 5350" listed in the "Network adapters" category, I have not any category 'Wireless Network Connect' at all. "

  I hope this helps!

• HP DV6768se Mini Remote works only on Windows 7!

  Just like the title says, my mini remote control won't work for nothing, I have windows 7 ultimate. I have the ENE CIR Receiver driver installed (41645) and with this driver, the only thing that works is the button to switch to the external display. I tried to change the battery twice (was a 2 Pack of brand new) still nothing. I even tried to change a new driver ENE CIR driver (44983) which is supposed to be for windows 7.but with this driver even not that external display button will work. This remote was working find on windows vista (but everything still sucked him )

  For your model, all you need to do is to install Quick Launch Button software, CIR driver comes into it.

  Uninstall the current ENE CIR driver, and install software QLB, Win7 Upgrade guide, here, your laptop is in level 2.

• Pavilion laptop: SD card reader works only with windows 10

  The SD card reader does not work after installing windows 10. I contacted Microsoft... they fixed other issues but said HP drivers needed to be updated to read SD cards.  Help, please. I am a professional photographer and NEED to use SD cards!

  Hello:

  What is the number of full model of your laptop?

  So most of the new laptops pavilion equipped with a Realtek card reader, try the first driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• x 220 card reader works only on Windows 8.1

  Hey,.

  I therefore installed Windows 8 (new install, no upgrades) on the machine and since then the card reader does not work. I downloaded and installed the drivers from the Lenovo Web site and after the failure of Driver Genius, and of ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but does not have the card reader (it worked before on Windows 7, the same day, I installed W8). I've updated to 8.1 and the problem persists.

  ATT,
  Lucas

  Yesterday, I did a clean install of Windows 8.1 DVD and did not install anything other than the minimum Lenovo drivers/packages to date (updated system from Lenovo and Lenovo Solution Center). Windows had a notification message that I had to install a driver for the Ricoh media player and its link took me to the download page for Lenovo 2.24.18.01 - what X 230 X 220 and I saw the 2.25.18.01 version too so that, on the contrary (if I was going to risk using the X 230 that I might as well use later). Anyway, I was watching the CPU with a lot of attention and it works fine.

  Note in the case where it is relevant - when I installed the driver, I didn't have an inserted SD card.

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• Simple pass works only on Windows 7 pro standard user

  I looked through countless questions simple pass and found no clue.

  I'm used to simple passage, recognizing the need for a u/p that it registers the new website or offers for me to slide my finger for an existing installation.  This is nothing.  It is runing as I see in taskman.

  Recently, I've reconfigured my logon as a standard user.  I can't see exactly that as a starting point, but that is the only change that I can remember.

  Product number: A5F92AV Windows 7 Professional 64-bit Service Pack 1

  simple pass 6.0.100.276

  Jess,

  I might suggest that the account on the other is the fix.  The idea of alternative / new account was first suggested 06/11/2013 and now once again in Lil_Lisa27 (thank you, Lisa!).  Everything you've tried, it's the only solution that has accomplished the goal: get SimplePass working on your Windows 7 operating system.

  You can use the transfer tool to move account data or you can simply move to the new account, and then set the ownership and permissions.

  You can also continue to seek a solution based on the knowledge that it was discovered the underlying problem to the environment into account in this particular account.  Once you have your new account to work the way you want, you can certainly leave the account 'broken' in the system and continue to push what you think of new things to try to fix the SimplePass database.

  Be sure to create a Restore Point before you make changes to the program or anything outside your account.

  Good luck!

• Alienware M17x R4 HDMI-IN works only on Windows 8.1

  Hi, I have a R4 M17x and tried to use my Xbox 360 with HDMI-IN but it works only for a second then goes black but the sound still works.

  I Googled it and the only thing I could find is that apparently it doesn't properly earn 8.1?

  Any other R4 M17x owners had this problem and I hope know a fix?

  Data sheet:

  I7-3720

  GTX 675M

  3D 120 Hz display

  For anyone else having the same problem, I tried the 352.86 driver and managed to do work for most, what you are to put the lid nothing when closed and switch to HDMI-IN, it shows for 1 second then goes black, then close and open the lid and it will appear and work. :-)

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.