3 seconds of discoloration Hotkey Manager

Hi all

In fact, this is my first post, because im having a problem that I'm not able to solve.

We have an envoirment enterpirse with 400 + T540p portable computers.

These laptops got the latest hotkey driver installed via SCCM, with the following options: s - sms configuration

Now, users are complaining that the Capslock and Numlock icon as long as the button is enabled.

I know that you can set this to "display the icon 3 seconds" under Advanced settings, but I'm looking for a solution to push this setting to all these laptops (and new laptops).

I tried a few registry settings under software/IBM/TPHOTKEY, but not appear to work.

Any ideas on that?

Thanks in advance

Change 'NumLockMethod' to 'HKCU\Software\IBM\TPHOTKEY\OnScreenDisplay '.

The value of '0', restartand then see if that does what you want.

Tags: ThinkPad Notebooks

Similar Questions

  • I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

    I use macbook pro.

    I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

    Please help solve this problem.

    This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  • External USB 2.0 Hard Drive detected only 10 seconds in the Device Manager

    I am running Windows 7 and trying to plug my hard drive 200 GB from an old computer with XP in my new computer via USB 2.0 to an external case.  The external box is its own source of power and requires no drivers. When I plug it into the USB port, I hear the Bell indicating the window detects an external device and she appears under USB devices in Device Manager, but only for about 10 seconds then disappears.  It never appear in disk management or in the computer as a mass storage device.  I tried to use other cables/USB ports. I tried exchanging the external box for a new thought the first one was defective, but that did not help.

    Hi Stroke77,

    ·         Did you get the computer pre-installed with Windows 7?

    It is about if the external drive worked when the computer was working with Windows XP or Windows Vista.

    Here are some steps that may help you solve the problem.

    1. plug in and turn on the external USB hard drive
    2. right mouse click on workstation
    3 left click on manage
    4. click on Device Manager
    5 expand the USB list
    6 find the USB device to USB hard drive
    7. the right mouse click - Uninstall
    8 turn off the external USB hard drive
    9. turn on the external hard drive USB and let it find and install the driver
    10. it should work

    You can see other steps from the link below:

    http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/dd9cd509-F9AC-4295-a75b-863f92f5595f

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Add the second instance in Enterprise Manager 10g database control

    Hello

    I have a server with an Oracle 10 g database instance and I
    set up local control of Enterprise Manager database for it.
    Now, I added a second instance on the server, using the same Oracle
    Homepage. Can I manage this new instance by using the existing database
    control or I have to configure a control second database help
    another port? The documentation is not too clear on that.

    Thank you
    Matthias

    You must configure another service of control of database for this on the other port.

    Better to use control grid to manage multiple instances.

  • Manager display Dell Hotkey application

    It will be really nice to a hotkeys Manager dell display.

    (1) brightness/contrast: during a day, I need to change

    as scroll + button

    (2) modes and setting hotkeys

    There are command line settings that allow you to do a little of that.

    DDM.exe IncControl 10 //to increase the brightness

    DDM.exe IncControl 12 //to increase the contrast

    DDM.exe DecControl 10 //to the brightness

    DDM.exe DecControl 12 //to decrease contrast

    Used in conjunction with regular Windows shortcuts to bind to the hotkeys of your choice.

  • Manipulation of Focus when entering a Manager

    Hello.

    I have a Manager with 3 fields added to it. How can I do so that whenever Focus found on the Manager, the second field in the manager gets the focus?

    Thanks in advance.

    You can overwrite moveFocus. or crush onFocus on the other fields.

  • First license 10.5 Cluster Manager?

    Hello

    I install a new BE6K with version 10.5. I see the old ELM has been replaced by the License Manager first and, like its precessor, it is automatically installed with Callmanager and unity connection. I would like to install a standalone License Manager (version 9, x is possible) and here are my questions:

    1. is it possible to install a v10.5 first stand-alone License Manager on a BE6K?

    2. If so, is that I have a 'second first node License Manager' on a second unit of BE6K? The idea is to avoid having a single point of failure on this server

    Thanks in advance for your help

    DAni

    The BE6K is no different from the ordinary CUCM.  So, Yes, you can install PLM in independent mode.  But no, you can't have two.

    With Cisco Business Edition 6000, first LM would be usually living with one of the
    application servers. However, if you wish, it is possible to run first LM as a virtual standalone
    machine, but it should be counted against the maximum number of applications allowed on
    a Server Business Edition Cisco 6000.

    First LM is deployed as a non redundant application. Where the application of the first LM
    is no longer available (for example, if the first LM VM knows the operating system)
    questions and may not start), the customer has 60 days to restore the first LM application before
    application of the license occurs

    Source: SRND CUCM

  • Try to add the second DC to vCenter instance.

    All the:

    I am sure there is a way to add a second "Datacenter" in one instance of vCenter, when the second domain controller is managed by its own server vCenter. Our current situation is that we have two physically separated data centers, both running vSphere 5.0. We would like to make sure he say for example my vCenter instance can see the other DC and its resources, but that stay DC managed the instance of vCenter that is local, not mine.

    Is this possible? I forget something here? I have no problem creating the DC object, but when you add to this the host domain controller, he lets know me that they are currently managed by another instance of vCenter...?

    Thanks in advance for the help.

    Thank you.

    Sounds like Modes related.

  • Process management and security roles

    Hi guys,.

    I haven't worked with security too, and now I have to set the users who will be linked to the cycle of process management. Is there a specific role for each phase? All phases are necessary?

    Thank you!

    Anna


    Hi Anna,.

    I think that the first and most important step in your task is to understand the information flows through your organization. Ask your customers/users how the flow of information would have been had they not HFM. Design a couple of cards and have your clients sign this process is very important in my experience.

    As soon as you understand what roles of company should deliver/review of information for the next role of business, then start designing HFM processes management.

    • The first level of process management is the road. At this level no user cannot import data except the administrator
    • The second level of process management is the first pass. At this level all users can enter data without restriction.
    • The third level of the management of the process is the levels of review. You have 10 levels of review by submission. However, a five-level review is enough for most organizations. Consider the most complex multilevel review process. My personal opinion is that the 4 levels of review are good enough for the majority of organizations. RL1, the inputer will enter data to the RL2, the Director of finance will review the data, RL3 hub/region Director will review the data and finally to RL4 users group will review the data.
    • Level 4 review I mentioned, can be the substitute of the next set of levels that is present, approve, and publish. The status "publish" will allow the entity to block which means that not even the administrator will not be able to change the data or calculate l‟entite.

    There are many combinations of how you can configure process management, so if you have any questions please let us know.

    Kind regards

    Thanos

  • Acrobat Pro hangs after 5 seconds

    Hello!

    I have not found an answer in the forum. So I hope you can help me.

    My new installation of Acrobat Pro - installed via the CC Application Manager - hangs after 5 or more seconds open Adobe Application Manager for 2 seconds. No difference when just openeing the application or any pdf file. There is no error message.

    Before the installation, I used a CS5.5 Design Premium trial for a few days. I uninstalled before installing the CS6 (cloud Creative). Before that, I had CS Design Standard 5.5 running without any problem for about 8 months.

    All other Applications work correctly.

    I use Adobe CS6 on a Mac under Lion with the latest updates (10.7.4). There is (not yet) any special fonts.

    IST has something to do with an update to Acrobat problems?

    Thank you very much for your help!

    Timo

    It can, but it is always difficult to ensure with the information currently available.  To give you the best opportunity for a successful installation, I recommend the following:

    1. Delete all Adobe Creative Software using the uninstaller programs located in Applications/Utilities/Adobe Installers
    2. Run the tool cleaner of CS - CS cleanup for installation problems tool | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    3. Restart in a Root user in safe secure account - let me know if you need more information for this and I can locate some Apple Web site links
    4. Reinstall Adobe Acrobat

    Some of these steps may certainly not be needed as the user root and boot.  But fill these steps will give you the highest probability of successful your installation.

  • On the 2nd monitor color management

    In the file of Lightroom_3_help.pdf ("update 03/12/2010') provided with LR3 (p22 low), it is said:

    «Note: Lightroom does not color - the view from the library on the second monitor module.»

    Is this correct?

    I have two monitors: one about the Adobe RGB (a HP LP2475w) range and the other about sRGB (an old Samsung), as well calibrated and profiled.  However, if the same image is displayed in library view on both, the colors displayed on the second monitor are virtually identical to those on the first.  It's true, no matter who is the main screen of LR and that is the second monitor.  But if Lightroom isn't a not color-managed the second monitor, the image would be likely sent as ProPhoto, which seems very very pale any monitor were the other.  Even though Lightroom has made the image as sRGB always on the second monitor, then there will be a significant difference when the monitor range were the second monitor (apparently not managed).

    Anyone can shed some light on this?  My tests suggest that the second control is managed by color.

    The display is fully color managed on both screens for me. It must be

    supported the monitors thus or otherwise second would be completely useless. It's

    that is trivial to do so as long as your profiling solution supports it

    true for all Macs and most modern windows machines. To me, this looks like to the

    Manual is simply false and the s sentence a vestige of when they first

    added bi-ecrans support. I remember there being color bug

    with it, then where he could catch the wrong profile display. It comes

    clearly not true anymore.

    PS Adobe Gamma? This tool has been deprecated since many years! Person not

    in their mind has yet to use it. Material calibration tools are

    cheap and widely available today.

  • Create a second standard handler.

    Dear Sir
    I need to create a second "Standard Manager2" standard Manager
    rules of specialization.
    Exclude/include Application Types
    include programs of basic memory cards


    I couldn't find name of the program "Memory - based Planner, based on Flash memory...

    even I connect as a sysadmin, I couldn't find these program names.
    Please let know us if I have to give me more responsibility.

    Thanks in advance.

    Hello

    What is the version of the application?

    You can find these concurrent programs in (simultaneous > program > define) window?

    Kind regards
    Hussein

  • Drive HARD of Equium A200 is not recognized on other laptops Toshiba

    I had an A200 equim but it is now broken, I wanted to put my hard drive in an another Toshiba, I tried the A100 as a friend had one, but would not work. I have another friend who has an A300 that I'll try the weekend but don't know if it will work and not more.

    Any idea of the reason why the hard drive A200 will work in A100? Sorry, my knowledge about computers is not great?

    Basically, I bought a label software I was using, I installed on my computer laptop partners and emailed the company and they said I have to buy a new license (which cost me 200usd!) for a new laptop!

    I bought a second hand A100 and managed to the key code of hard drive, however when I print there still the watermarks of the company on the labels is basically useless.

    I managed to get the files on disc hard when he was in the linux computer, well, a friend for me anyway!

    Post edited by: welshmatt983

    Are you sure that your A200 HARD drive is not faulty?
    > I tried the A100 as a friend had one, but would not work
    How to understand this?
    HARD drive is recognized in the BIOS?
    If you try to use a disk bootable for installing operating system can configure detect this HARD drive?

    Sorry, but this software problem is not understandable for me and you should clear it with the Publisher of the software.

  • ALFA AWUS036H USB adapter referee

    I have a Compaq Presario SR5610F with improved power (Antek 500 watt) and Vista 32 bit.  I bought an ALFA 802.11 b/g usb network adapter that is based on chipset Realtek RTL8187L.

    That is the problem.  When I plug the adapter into the USB port (any) and load the drivers, the adapter only cycles on and outside.  Which means it appears and disappears on the computer continuously at a rate of about once per second.  If Device Manager is open, it appears and disappears under network adapters.  I tried all the drivers I can find... same result.  I even let windows choose the driver from Windows update... even.  I did a restore of the entire system (using another hard drive) back to the State nine factory... made no difference.  Tried another card, did the same thing.  Is there some kind of incompatibility with the presario and 8187 chipset?

    ImaginaryKaos wrote: I could understand if one of these maps to this problem, but three of them?  Three different cards the same when plugged into a USB ports reacted.  The constant cycling on and outside.  Could they just draw too much current from the port?  They are supposed to be rated at 500ma (different from 1000mw), but who knows?

    I saw a review on this device and they knew the same problem you seem to be.

    "The Realtek RTL8187 Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter has malfunctioned and exceeded the power limits of its hub port. You should disconnect the device. »

    I bypassed this problem by buying a hub usb powered from best buy.

    Just a thought

  • Can satellite A350 - I change the size of the partition?

    Hello

    When I bought my Satellite A350 I noticed that she was divided into 2 discs, 1 C: drive called Vista who had 149GB and the other player called E: data which has 147 GB with 141 GB of free space that contains a folder named HDDRecovery giving a total of about 300 GB.

    What I would like to make which I do not know if it is possible, unless I send it away is the following: unpartition 2 readers is 1 disk, partition it then again in 2 discs but this time Vista C: drive to have 250GB while the other drive E: data with the recovery of 50 GB. I have the recovery disks as well. Do you know if it is possible to do what I want without having to send in the manufacture? And if so, how?

    I also run Windows Vista Home Premium Service Pack 1.

    See you soon

    Hello

    Hmmm. You can try to reduce the second partition in disk management.

    You can find it in the control panel. You will find the link to the System Maintenance and then click Administrative Tools to open the Administrative Tools folder. Click computer management to open the computer management window. You'll find disk management.

    As I said above, you could try to shrink, first of all, the second partition, and then could attempt to add the free space on the first partition. But to be honest, I doubt that this would be possible because the free space would be located behind the second partition and you can't add it to the first partition C.

    Anyway, check it and play around maybe it will be possible
    But note; You should have the recovery disk created because there is always a small risk that you would confuse the hard drive.

Maybe you are looking for