3 USB ports on 4 does not work on Satellite A660-12th

Similar Questions

• Chicony USB 2.0 camera does not work on Satellite P205-s6267

  Please help me!
  I bought a toshiba satellite p205-s6267
  everything works but the built-in webcam does not work, I tried many links and read many forums and have not found a solution.
  I tried to install all the drivers and it does not work
  If someone can give me a good driver or software for this, please help
  Thank you

  Hello

  give me your hand, I'll help you ;)

  Here, my friend, the link of all links that will guide you to the resolution (I hope so :))):

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  If it does then I really Don t know what...

  Welcome them

• BT does not work on Satellite A660-13D

  Hello

  I have a Toshiba Satellite A660-13D, and since a few days, Bluetooth does not work.
  In device manager it tells me everything is executed, but BT does not open.
  Can someone help me with this?

  Message was edited: assignment has been translated

  Hello

  It is not easy to say what the problem is here. What you need to do is to activate the BT module correctly and software BT must start properly.
  Are you using the original operating system that you got with your laptop satellite? BT Stack (software) is installed on your machine?

• Switch signals and Wireless does not work on Satellite A660

  I have laptop Satellite A660 17 M AND I am facing a PROBLEM THAT IS THE WIRELESS DO SWITCH NOT RUN AND did not SWITCH THE WIRELESS ADAPTER ON or OFF
  AND ALSO ON THE TOP OF THE KEYBOARD FUNCTION BUTTONS DOES NOT WORK

  AFAIK, the utility Vap and flashcard support are responsible for these functions. You can try to download and install them

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Note, first you must install the utility of vap and restart the support belt utility and Visual support cards, then

• USB Port Dell monitor does not work

  Hai All,

  I use the monitor LCD Dell dell optiplex 330 CPU. If I am Connect USB keyboard or mouse to control the USB it does not with us. It has a setting to activate the USB Monitor?

  Hi Dinesh.P,

  Can I know the model number of monitor?

  Check if the upstream USB cable is connected to the monitor. For more information, see the image below:

  

  Waiting for your answer!

• Re: Keyboard backlight does not work on Satellite A660-07U

  Hi guys,.

  Ive recently had to reformat my laptop Toshiba Satellie A660-07U. The reformat was fine and everything seems to be in another order then the problem with the backlit keyboard im. Ive tried the fix key FN but ive been unsuccessful. Media buttons (play/pause, volume, etc. of the buttons next to the Start button) are also not turn on.

  Can someone please help me solve this problem?

  Thanks in advance!

  > Ive recently had to reformat my laptop Toshiba Satellie A660-07U.
  What did you do exactly? Have you installed original Toshiba recovery image?

  Anyway, if I m remembering well the option for keyboard backlight is available in Toshiba HWsetup Toshiba HWsetup tool and check all tabs. One of them must be for lighting.

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• My USB ports and MIC do not work. I hope that this is not the motherboard. Someone knows how to fix this?

  Initially, it was a port that would not work. Before the USB ports out I did pay my phone with the USB cable. Before that my microphone stopped working. Deactivation and activation of the ports as well as uninstall then re install the USB readers and I tried a system restore. I also tried to take the battery for an hour or two and restart the PC. None of this has worked. Today, I heard some hope of my computer... I heard the sound of him recognize a dongle that is plugged. This sound is produced after starting my PC. I have not heard in a while and still haven't when I unplug and plug back in to the dongles. My computer (a laptop) like also to restart auto sometimes when I close the lid and open it, the screen does not light and it will be off and try to restart itself but the screen never lights up and he'll stop and try several times to start. In this case I have to hold the power button down to turn off completely and take the battery out and put it back in, then turn it on. I feel that it's a hardware problem but I'm not that great with computers and I don't want to give up yet on this computer. It cost me a pretty penny and I am a broke student.

  If anyone had the same types of problems and has a solution I'm willing to try anything.
  Thanks in advance
  -Mike

  Hi Mike,.

  You can consult the following wire link and check if it helps.

  Tips for solving problems of USB devices

  It seems that you have to re - enable ports in the BIOS (Basic input/output system) settings.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. Be sure to observe the manufacturer's instructions or contact the manufacturer for the same thing.

  You can consult the following thread link and check.

  USB ports, CD/DVD player, and Mike just does not work

• GADMEI USB TV Tuner card does not work on the new Windows 7 computer

  Original title: usb tv card is not supported in windows 7 x 64

  Hello

  I have new office... everything works fine, the problem is with my tv usb card.

  I tried gadmei model utv882e and utv332e... no one works with my office... but in my laptop with the same version of windows, two tv cards works very well.

  I have no other problems in my pc or tv... cards all drivers are up to date.

  Here is my desktop specs:

  model of motherboard is asus b85m-k

  

  

  Hello Faysal,

  Thank you for visiting Microsoft Community.

  As described in the question, I understand that your two cards of Gadmei USB TV Tuner does not work on your Windows 7 desktop. The same card works fine on another computer in Windows 7 with the same configuration.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you plug-in card TV Tuner? Your computer will detect the device? Do you have a code or a message when it fails to connect?
  2. Did you check connecting them via a different USB port?

  There may be a possibility that drivers for Gadmei TV sticks are not correctly installed on the computer. We will try these methods below and check if that helps.

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem diagnosed and fixed automatically.

  Hardware devices do not work or are not detected in Windows

  http://Support2.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

  Method 2:

  If the fixit above does not resolve the problem, I suggest to download the best compatible driver on the device manufacturer (Gadmei) site or contact Gadmei to get the best driver for your computer and install it.

  You can also read the article below to help update the device driver.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Satellite 1900-803: Hi-Speed USB 2.0 card does not work

  I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

  the map shows that it runs on any 32-bit location.

  I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

  Help, please.

  I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

  Post edited by: wes0702

  Hello

  Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

  Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
  If the card supports 32-bit so you should use the 16-bit option.

  I think you should play a little with this option and possibly that the card will work.

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.

• Chicony usb 2. camera Webcam does not work in xp toshiba s300L

  My Webcam Chicony USB 2 does not work on Windows Live or Skype.  Video œuvres in a trial, but I cannot enable video calling. Computer is computer S300 laptop Toshiba Satellite - operating system Windows XP, IE 8.   Have tried everything... Suggestions appreciated.

  Hi Jojololo,

  ·         Did you do changes on the computer before the show?

  ·         What version of Windows Live Messenger?

  If you use Windows Live Messenger 2009, there are two main webcam / video configuration menus.

  a. start Windows Live Messenger and sign in.

  b. before connecting to anyone, open the menu "Tools" then click on "Configuration video / Audio»

  c. perform the tests and click on 'next' and confirm the webcam of video display, and then click "Finish."

  d. before connecting to anyone, open the menu 'Tools' and then click 'Options '.

  e. Select "Staff" and put a check mark next to "Webcam - enable others to see that I have a webcam".

  f. click 'Apply' and then click 'Ok '.

  g. sign out and EXIT Windows Live Messenger completely to save the new settings.

  If this does not work, I suggest you visit the following sites for help:

  Windows Live Support

  http://windowslivehelp.com/community/

  Skype support

  https://support.Skype.com/

  Hope this information helps.

• The USB ports and keyboard randomly not working no-error 43

  Hi all

  I tried intermittently in recent days to resolve a really annoying error 43. I was able to glean
  of the various forums that problems similar to mine are most often took place and various folk remedies
  appear to be available, but none of them have worked for me.

  Here's what happens: apparently at random, my usb ports and a keyboard stop working. It's especially annoying
  because I have a usb mouse, when this error occurs, I'm so completely powerless to do anything.
  I got around it sometimes by plugging my mouse into a different usb port (my computer a lot). That's how
  I found that I was getting code 43 error, "this device has been stopped because he reported the problems." (do not remember
  the exact wording).

  This started happening a few days ago, I've never had any problems like this before. I also tried other usb devices
  in the port - nothing works when the error occurs. Curiously, the error sometimes stops just as randomly
  as it begins. Sometimes some ports work and others - sometimes, I can't use my keyboard, but not my mouse and
  Vice versa.

  Here are the remedies I've tried:
  1. Uninstall and then reinstall the drivers for the USB controllers, mouse and keyboard
  2. performance of FixIt for hardware and drivers
  3 let the computer unplugged for a while, then returning to it (it helps temporarily, but the error still recurs)

  Sometimes, I heard that you may need to update your BIOS. I already have the latest version of.
  If someone needs more information, let me know.

  Alright! That's all. I hope someone can help me, that would be a really stupid handicap for my computer to have otherwise.

  Update the latest drivers windows 7 compatible chipset and motherboard manufacturer's Web site.

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  If the problem continues, I fear that you may need to replace the USB hub.