3002 hardware client questions

You can use a dynamic external ip address with the 3002 hardware client, or should it be static? I am assuming that you can use a client mode, but what about in network extension mode? Also, I just wanted to check that an external switch or hub can be used with version single internal port in order to support multiple hosts. Q & A 3002 page knew a little about it.

Thanks for the help,

Adam

Yes and Yes.

You can use DHCP on the external interface on a 3002 using the extant network mode.

You can use an external switch or a hub with the single version port internal.

No link to send your way, but I could do so personally (and now)

Tags: Cisco Security

Similar Questions

  • "vpn 3002 hardware client" and any other vpn device

    When I do a session between the customer Hardware 3002 3000 and remote site vpn series concentrator or PIX or router to the central site. "Server has" is located at a remote site and 'Server B' is located at the Central site. "Server has ' and 'Server B' communicate with IPSEC Tunnel. I know that "Server A"(sur un site distant) can initiate a session of "Server B" "(central site)." Is it possible that initiate (central site) of "ServerB"a session of "Server A"(remote site)? ".

    Hi sbjeong,

    If you use the NMS on the 3002, two servers can initiate traffic in the event where the IPSec tunnel between your 3002 and Server VPN (PIX, IOS, VPN3K) is established

    Jean Marc

  • PCoIP hardware clients concern server scaling?

    In terms of number of users/CPU core... If I understand correctly using the client software to view is not an impact this number, but don't PCoIP hardware?

    It depends actually. The only difference is that hardware clients do not support the MMR. In this case, any video content is made on the host side. It only becomes a problem when you have a specific CODEC that happens to the MMR works and you have a rate of competition for users to watch the video at the same time. Not to mention that this combination no impact.

    WP

  • on the virtual hardware noob question, pls help

    I have a problem. I have a system with vmware not made by me, but now I have to take control of it and make backups of machines. I want to buy essentials and essentials of veeam vsphere.

    Today, I read this:

    Virtual hardware

    • Virtual machines with disks involved in the shared SCSI bus are not supported, because VMware doesn't support taking snapshots these virtual machines.

    • RDM virtual disks in physical mode, Independent disks disks connected via in-guest iSCSI initiator are not supported and are ignored automatically process.

    Where can I find this information? I mean where can I see in vsphere client if I am in this situation? Is there something one place where I can find clear if my system is in this situation? I had under Configuration, storage adapters, and it is written:

    Broadcom iSCSI adapter

    vmhba32 iSCSI

    This means that I'm doomed?

    Hello

    This information is on your VM configurations. If you need to choose your VM--> pass parameter to change. Then select your SCSI controller and verify if the virtual or physical mode is selected.

    . For RDM, just select a hard drive and check to see if you have a logic unit number instead of a vmdk. But if it's a vmdk you will not see the physical or virtual mode option.

    Kind regards

    Julien.

  • Oracle on Linux and Windows Client question database server: NetMgr Windows and Linux NetMgr

    People,

    Hello. I have installed Oracle Database 11 g 2 server in the Oracle Linux 5 Starter PT853 Instance of database virtual machine. Then I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine. Now I face the problem of connection of the VMs 2 as below:


    In Manager Net Linux Server Machine:

    Service name: PT853
    Connection type: default database
    "TCP/IP Protocol".
    Host name: localhost
    Port name: 1521

    Listener: LISTENER
    Protocol: TCP/IP
    Host: localhost
    Port: 1521


    I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.
    In the Windows XP Client computer, the information in the Net Manager is the same, but the connection is not successful. Its details are as below:


    NET Service Name: PT853
    Protocol: TCP/IP
    The database Machine host name: localhost
    Port number: 1521
    Name of the Basic Service: PT853
    Connection type: default database


    I have test the Service using "SYSADM" UserID and password to 'SYSADM' which are the same with Linux, but this error: TNS: listener does not currently of service requested in connect descriptor.


    I followed this tutorial http://www.vmware.com/support/ws5/doc/ws_devices_serial_2vms.html to configure 2 virtual machines in Windows 7 host machine.

    In Windows XP Oracle database Client Installer directory, the "tnsnames.ora" file has an entry that matches the name Service in Net Manager. Directory of database server installation Oracle Linux, the file 'tnsnames.ora' has no entry because I installed the server of Oracle database with the instance of database startup PT853.


    I tried to test 2 virtual machines in the way as below:

    In Linux, [user@localhost ~] $ping WindowsXP_HostName
    Release: Unknown host WindowsXP_HostName


    At the Windows XP command prompt:
    C:\ping localhost.localdomain
    Its release: ping localhost 127.0.0.1 with 32 bytes of data...
    Reply from 127.0.0.1: bytes = 32 time = 2ms TTL = 128


    He meets a few times and then disconnected by itself. It seems that Windows XP is ping itself and not Linux server. The host name of the Linux server is 'localhost' as well. It is a kind of confusion for me.


    From the information above, we can see that 2 VMs cannot connect between them. Net Manager in Windows XP Oracle Client unable to connect its Service PT853 with the Oracle Linux database server.

    My question is:

    Can any folk tell me how to connect Oracle Client in Windows XP with the Oracle Linux database server?


    Very grateful in advance.

    user8860348 wrote:

    People,

    Hello. Thanks much for the reply. I am very grateful for your help.

    In Manager Net Linux Server Machine:

    Service name: PT853
    Connection type: default database
    "TCP/IP Protocol".
    Host name: 192.168.196.102
    Port name: 1521

    Listener: LISTENER
    Protocol: TCP/IP
    Host: 192.168.196.102
    Port: 1521

    I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

    In the Windows XP Client computer, the information in the Net Manager is the same as below:

    NET Service Name: PT853
    Protocol: TCP/IP
    The host of the database Machine name: 192.168.196.102
    Port number: 1521
    Name of the Basic Service: PT853
    Connection type: default database

    I test the Service using the "SYSADM" username and password "SYSADM" which are the same with Linux and the connection is successful as well.

    IP 192.168.196.102 is Linux. This means that oracle database Client in Windows XP may log into Oracle Database Server under Linux. Don't you think I'm not mistaken? If so, I'm very happy and very grateful to you.

    "Do you think I'm not mistaken?

    By definition, if you can establish a connection, then you are correct.

  • VPN - VPN easy hardware Client connects, but no traffic

    Hello

    I have a PIX 515E and 501 acting as a customer of material. Several remote location are connected as a easy VPN clients, a place to connect, but no traffic flows. I went from mode-extension-network client mode and I can connect through other network hosts.

    I don't know why this 501 PIX we're different. There is no ACLs except which is extracted from the station.

    Any ideas where I should look?

    Thank you

    Vince

    A few quick comments:

    1. I don't see 192.168.0.0 is part of this ACL inside_outbound_nat0_acl.

    2. I see an instance of card crypto 40 with "incomplete" crypto card, which is actually not a correspondence address.

    outside_map 40 ipsec-isakmp crypto map

    peer set card crypto outside_map 40 216.27.161.109

    outside_map card crypto 40 the transform-set ESP-DES-MD5 value

    ! Incomplete

    Not sure if it's the current configuration of the pix. If there is an instance of card crypto with an incomplete correspondence address, all traffic will be encrypted.

    Kind regards

    Arul

  • Conversion of hardware compatibility question

    I am running VMware 9 on a host of Win 7-64.  I create only dd VMs, physical disk image files.  If I happen to use a file descriptor 8 VMware vmdk, VMware application 9 if I want to upgrade the hardware.   If my underlying dd image file is read-only, I get a message of "Insufficient permission to access file."  As a first step, which seemed logical, because I don't want to change the dd image file, I put to RO.  However, from what I can tell, if I update a virtual machine from 8 to 9, the only thing that VMware is change the line ddb.virtualHWVersion = '8' to '9' = ddb.virtualHWVersion and create a vmx file appropriate.    No changes are made to the underlying image dd file.  So, if nothing needs to be changed in what concerns the image file, why VMware cares if the image file is RO?  Thank you.

    After clicking finsih - reopen the virtual material Editor. The vmdk not persistent value.
    After that, you can start with all the vmdk NTFS readonly

    Hmmm - I guess I don't see your problem ;-)

  • Satellite M60 Hardware Upgrade question

    Hi all

    I have a PC laptop Toshiba M60 just after some information to be upgraded for online games (if its worth it) plug as follows: -.

    [Information on PC]
    Model name Satellite M60
    Part number PSM60A-02F00D
    Serial number
    Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
    Version of the BIOS V1.20
    Processor Intel (r) Pentium (r) M processor 2.00 GHz
    1024 MB of RAM memory
    Disk capacity hard 79,826,342,400 [bytes] 74.344 [GB]
    Capacity of the hard drive space free 61,610,532,864 [bytes] 57.379 [GB]
    Video NVIDIA GeForce Go 6600 worm = 6.14.11.9805
    Screen resolution 1680 x 1050 Pixels
    Color quality, true color (32 bit)
    Audio Realtek AC97 Audio worm = 5.10.0.5830
    Realtek RTL8169/8110 Family Gigabit Ethernet NIC network worm = 5.709.1121.2008
    Intel (r) PRO/Wireless 2915ABG Network Connection worm = 9.0.4.39 MacAddr =
    Modem software Modem TOSHIBA worm = 2.1.51.0
    IDE Device 1 TOSHIBA MK8026GAX
    Interface IDE 2 no
    Devices IDE 3 MAST * a DVD - RAM UJ-years 840 Firmware = 1502
    Interface IDE 4 no
    Interface IDE 5 no
    Interface IDE 6 no
    Internet Explorer 8.0.6001.18702

    EC/KBC Version «»
    PS-MICOM Version «»

    You can upgrade what RAM or HARD drive.
    With more RAM laptop will have better performance in general, but I don't know if this will help a lot for online games.

  • Games for Windows Live client questions!

    Trying to install this a download but I get an error "Required Windows component is disabled" but no other help? Any ideas please?

    OK, took the easy way out...

    Created a new account and everything seems to work very well.
    Thanks for the help
    concerning
    Mike
  • Hardware upgrade question

    For a few years, I've been running my Creative Suite on a Dell laptop, i5 dual-core 1.8, 8 GB of RAM (maximum), with integrated Intel HD graphics.

    And it works fine, but as you can imagine, it's slow.

    For Christmas, I intend to treat me a new laptop; I have not yet defined a budget.

    I have been informed that the only factor that will make the most difference in the upgrade would be to find one with a video card separate and dedicated RAM, rather than the Intel or similar built-on-the-Board graphic.

    Of course, I'll go for the processor/RAM.etc. most, I may in time, but always compromise must be made.

    According to your experience, focus you your spending on a separate graphics card, or go for still more RAM or processing power?

    EDIT: I'm asking specifically regarding the performance of the Creative Suite programs; This is the only memory-intensive activity that this machine gets.

    If you buy a laptop to edit video, it works fine for everything else

    Discussion of video editing PC laptop - http://forums.adobe.com/thread/1369220?tstart=0

    -Laptop to edit red 4 k video http://forums.adobe.com/thread/1108124

  • Hardware certification - Question of Type of SCSI controller

    Controller SCSI of VM types are defined in the Certification Guide of compulsory storage?

    I installed Windows 2008 Server on a virtual machine with the type of LSI Logic SAS controller (that I see, I can't change it prior to installation) and after that the installation has been completed and VM booted ok I put off and then changed the type of controller for VMware Paravirtual. VM could not start. I changed the type of controller to LSI Logic parallel and got the same result - VM could not start Windows.

    Can I use LSI Logic SAS on all virtual machines where I can not change the type of controller or it will not pass the verification test?

    Thank you in advance.

    The reason why it cannot start, it is that there is no driver installed for it.

    To work around this, add another controller of the new type, start windows and install the driver, then stop switch the premiera autour and you should be fine.

    Linjo

  • VPN solution - 3002 to IOS

    Hi all

    I'm looking for comments and options for a VPN solution.  The attached diagram shows the configuration of the network and what I am trying to accomplish.

    I have a client to Site A need establish a VPN tunnel with an outside party 3rd , located at Site B.  Traffic must be passed between hosts on Site a subnet 192.168.8.x and host subnet B Site 192.168.9.x

    Site B has a VPN 3002 hardware client to establish a tunnel with Site A

    Site A has an Internet facing router with advanced IP services IOS and a worm ASA 8.x protecting internal resources.

    The Site A customer will only allow VPN tunnels with the router, as opposed to the ASA.

    Based on this topology, how to better create a static tunnel VPN 3002 to the router and allow traffic on the route to/from the 192.168.8.x subnet to Site A and to the 192.168.9.x subnet and Site B?

    All your comments and suggestions would be greatly appreciated.

    You can configure the EasyVPN in NEM (Mode Extension network) between VPN 3002 and router IOS. This will be the only option

    supported on VPN3002 to reach the VPN tunnel between VPN3002 and router IOS.

    Here is the sample configuration for your reference:

    http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080095106.shtml

    Pls also note that VPN3002 is EOL, and here is the notification of end of LIFE for your reference:

    http://www.Cisco.com/en/us/partner/prod/collateral/vpndevc/ps5743/ps5699/ps2286/prod_end-of-life_notice0900aecd805cd557.html

  • 3002 vs 800 router

    Hello

    Why do I buy a double as Dear customer Hardware 3002 instead of a router 800?

    Kind regards

    Rutgrt

    No reason really to get a.

    What you can do with a 3002 hardware client is basically push the BONE for her to the central site, if your central site is running a hub of 3000.

    Manage the centralized configuration is better on a 3002.

    And these two "advantages" are really useful if you use a concentrator 3000 series on your central site.

    The 3002 is also certain amount of firewalls on its WAN. You can make IOS Firewall on 800 routers too using an IOS image.

    So, if you have no particular reason to just get the 800 router.

  • is eazy customer vpn is supported only on the routers of the 800 pix 7.0 series iOS

    I'm eazy vpn with pix 7.0.4 ios with a 3640 router. the 3640 router is like aeazy vpn client. and the pix as the eazy vpn server. the client connect and continues to ask the xauth parameter. I read in the release notes that requires this vpn eay 12.2 and especially sure ios for 806 routers. the pix also does support eaxy customer vpn routers fo 800 series only. urgent help required. If this true pix sucks big time. they force us to buy routers.they become like microsoft. pls help

    Assane

    According to this document

    http://www.Cisco.com/en/us/products/sw/secursw/ps5299/index.html

    Cisco Easy VPN remote is now available on Cisco 800, 1700, 1800, 2800, 3800 and series UBR900 routers, Cisco PIX 501 security equipment and 506th and Cisco VPN 3002 hardware Clients.

    So no support to 3640...

    M.

    Hope that helps if it is

  • PIX VPN local authentication client

    Hello

    I use the client 3.x VPN to connect to the PIX 515 using IPSec. I would use local authentication for Client VPN PIX. But I can not use the command "vpngroup Group1-LOCAL authentication server. Is it possible to use authentication LOCAL client VPN on PIX.

    Thank you.

    Kind regards

    Doug

    Try "crypto map... the LOCAL client authentication" instead.

    This command specifies the method of authentication for XAUTH.

    All orders "vpngroup" specify different parameters to be pushed

    software/hardware clients IPSec via ModeCfg. For example,.

    'vpngroup LOCAL authentication vpngroup1-server' is for the individual user

    Authentication of customer Hardware 3002. And, you're right, IUA is not

    support with LOCAL :(

    Oleg Tipisov,

    REDCENTER,

    Moscow

Maybe you are looking for