3005 pro MT: the coprocessor driver is not installed

Similar Questions

• Cannot print on the HP LaserJet 4050 printer - "the printer driver is not installed. Can't find a Package of basic driver required by the printer driver Package.

  Running Win7 32 bit.  Have had the printer HP LaserJet 4050tn installed for 2 years.  It is on the network and is always accessible from other computers on the network successfully.  I was printing to it in a billing program web-based when my PC froze.   Rebooted and was no longer able to print to it.  Tried to delete the printer, the spooler of compensation / Max ', and re-installing the printer with drivers downloaded from HP (tried the standard and universal drivers).

  When I try to install the printer I get a message "Player of the printer was not installed.  Can't find a Package of basic driver required by the printer driver package"

  I have a Brother MFP 2820 it is USB and it works very well.

  Any help would be greatly appreciated

  Try HP Print and Scan Doctor
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

• software for the printer driver does not install

  My printer is C7100 all-in-one.  My OS is windows 7 - message comes back "could not install any software.

  I recommend traverse "Programs and features" in your control panel and manual uninstall of the printer, then shut down and restart your computer. If the files do not uninstall, then you can have a deeper problem with your operating system.

  Once the software is missing, try again after the above link and by installing the full setting software.

  Let me know!

• The video driver is not installed!

  
  

  Hello:

  Sorry, that didn't work.

  This is the community forum of English language.

  I know that 2 words in Russian. DA and nyet.

  I don't have any other suggestions that you can try since it does not work.

  Paul

• installation CanonCP800 says driver is not installed

  I am trying to connect the Canon Selphy CP800 photo printer to my computer via a USB cable. He tells me that it can not install. When I troubleshoot it, it says, "the CanonCP800 driver is not installed. Install the latest driver for the device. I click on 'Apply in trouble', and he said to me, "CanonCP800 is not a pilot." I don't know what that means. Is there a way I can connect photo printer to my computer so I can print photo turned the computer off?

  You have the right drivers W7 for it? (32 bit or 64 bit depending on your OS)

  Usually best to check with the manufacturers - http://www.canon.co.uk/For_Home/Product_Finder/Printers/Direct_Photo/SELPHY_CP800/#p-specification (UK) Web site

  Of the foregoing:

  I think these are the ones (32 bit) - http://software.canon-europe.com/software/0039222.asp or (64-bit) - http://software.canon-europe.com/software/0039223.asp

• MSM7x27 (Samsung GT-S5830) driver is not installed on windows 8

  I have recently upgraded to windows 8 (64-bit) on my computer... Maybe it's a bad blow but anyway...

  As the title suggests, the drivers of my Samsung GT-S5830 work well with windows 8... the MSM7x27 driver is not installed by windows 8... Unlike windows 7 (64-bit), it is automatically installed on it... even without the driver installation files. I even tried to install the driver files in windows 8, but no luck, instead of MSM7x27 as the name of the driver, it will show unknown device... and yet windows does not detect my phone
  PS. Windows doesn't detect my phone when it is in download mode (Android)
  Hardware ID:
  USB\VID_04E8 & PID_6601 & REV_0100
  USB\VID_04E8 & PID_6601

  wait!, I found the driver here: http://downloadcenter.samsung.com/content/SW/201306/20130610184736640/SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.25.0-retail.exe

• attempt to copy to the windows drive is not an unknown error occurred (-54)

  When syncing my iPhone, I get the following error message near the end of the processs of 6s + 128 GB

  attempt to copy to the windows drive is not an unknown error occurred (-54)

  
  

  Someone has an idea what is the cause to happen and what I can do about it?

  Thank you

  Hello

  Here is a solution for your problem

  http://www.IMore.com/having-trouble-syncing-iTunes-after-updating-Windows-10-her're-your-fix

• Satellite Pro 2100 - new HARD drive is not booting

  Hello
  I wanted to update my SP2100 with a WD1200BEVE. (120 GB of WD).

  Copy of disk via USB + speakers worked, but after changing the disc nine does not start: the laptop hangs up with blinking cursor.
  Already checked that the partition is active and even a new installation from a CD of XP has the same result! The BIOS seems to accept the drive (if not installing via CD should have failed) so where is the problem?

  Any tips?

  Hi Kannengiesser,

  Which is really strange that you can t start up disk even it s recognized in BIOS correctly...

  You have the Toshiba Recovery disk? If so, you can try this disc factory settings. If it works, it was just an installation problem.

  But I couldn't imagine also that the new HARD drive is not working properly last week I had a similar problem. Made a HARD drive upgrade, but a few days later Windows didn't start because the HARD drive had a bad sector, now I'm waiting for a replacement drive.

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• Dell Optiplex PC 390: the driver for the PCI device is not installed

  In "Devices and printers" my desktop unit shows a yellow triangle with an exclamation point.

  When I click on "help" I get the message "PCI device driver is not installed. When I try 'apply this correction', nothing happens, it retains only the search.

  I've read to go to "Control Panel > Device Manager" and click on the part of the problem, then click on "Details > hardware ID" and I get the following:

  PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4 & REV_00

  PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4

  PCI\VEN_1FD4 & DEV_1999 & CC_070800

  PCI\VEN_1FD4 & DEV_1999 & CC_0708

  I don't know where to take from here. Can anyone help?

  Thank you

  Kathy

  Hi, Kathy:

  Here is the link for the driver you need...

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=DMD90&FILEID=2967023673&osCode=W764&ProductCode=OptiPlex-390&LanguageCode=en&CategoryID=cm

  For later use, there is a Support Forum of community Dell for Dell desktop PC.

  http://en.community.Dell.com/support-forums/desktop/

• Network driver is not installed and have no option for the wireless

  Hello

  My network driver is not installed and I have not listed in my device manager wireless driver. For this reason, I am unable to connect to the internet.

  I've seen previous posts that you need network controller ID for this problem, they are:

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C

  PCI\VEN_168C & DEV_0036 & CC_028000

  PCI\VEN_168C & DEV_0036 & CC_0280

  Excuse my lack of knowledge in this area, but how to download new drivers if I can't get an internet connection.

  Appreciate your help.

  Best regards and thanks,

  Jeff.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe

  You also have the following for Bluetooth:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe

  Kind regards.

• Aspire 5740g and the dvd drive does not appear in 'my computer '.

  I had to have a new installed hard drive I got an error message saying old default disk.

  I also had a clean install of windows 7 that I was uncertain if my discs that I created would be ok.

  So I have not all the gifts that have been installed on the laptop like new. Now, I find that the dvd drive is not displayed in my computer and nothing happens when I insert the disc.

  This has happened a couple of days and I did a restore of the system to a previous restore point.  Does anyone know how to solve this problem.

  I also do not have the secure egis - any ideas how to get this back

  Then... your DVD is probably defective.

  did you check in the BIOS if it is listed on bootable devices?

  Press F2 at startup, if it is not listed, it is defective.

• lack of start up programs, did a search and all the files on the hard drive, just not where they belong, running windows xp with sp3, any help would be appreciated

  all programs and files on the hard drive just not here where they belong, on windows xp with s p 3

  Hi tessagourden,

  1 have you tried all of the suggestions listed in the previous post?

  Add the previous suggestions, you can also try the system restore to the point before the attack of viruses and to check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.