305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

Similar Questions

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• DESKTOP HP 700-527C SERIES WILL NOT START AFTER A REBOOT WITH MY SEAGATE BACKUP MORE 4TO CONNECTED TO USB 3.0 OR 2.0

  WHEN I CONNECT MY EXTERNAL HARD DRIVE BACKUP 4 TB OF SEAGATE MORE SACT4000600, HE NOT ONLY RE-START THE COMPUTER. IT SEEMS TO BE

  TRY TO RESTART ON THE SEAGATE, NOT THE INTERNAL HARD DRIVE. MY COMPUTER IS A HP-700-527 C, RUNS THE WINDOWS 7, THE INTERNET EXPLORER BROWSER. MY ERROR MESSAGE SAYS "NO BOOT DISK OR DISK IS DAMAGED." I JUST INSTALLED CMS BOUNCEBACK ULTIMATE, WEBROOT AND MICROSOFT OFFICE PRO AND VISIO.

  I FIRST SET UP THE FIRST COMPUTER AND RECEIVED THIS MSG ON RESTART AFTER THE DISKS HAVE BEEN INSTALLED FOR BOUNCEBACK AND SEAGATE. THOUGHT IT WAS A PROBLEM OF HP, NO LUCK WITH THEIR HELP. MICROSOFT IS NO HELP. A COMPUTER HELD THE GEEKSQUAD AFTER THEY WENT THROUGH IT REMOTELY AT HOME, THEY COULD NOT MAKE CHANGES TO THE BIOS REMOTELY. BIOS IS BELIEVED TO BE IN THE WRONG ORDER TO RE-BOOT. THEY COULDN'T GET IT TO STOP TRYING TO RESTART ON THE SEAGATE, EVEN WHEN THE BIOS FOR THE REST HAS BEEN DISABLED.

  ONLY THING ON IN THE BIOS WAS THE C: / DRIVE. BUT, WITH IT UNPLUGGED IT WOULD RESTART WITH THE BIOS ALWAYS POWER OFF TO EVERYTHING ELSE? WE PLUGGED ON THE 3.0 AND VERSION 2.0. SO, I TOOK THE COMPUTER BACK THINKING IT WAS HER, EVEN A NOVELTY. AT EXTERNAL BACK SAME THING. SAME THING ON THE NEW COMPUTER AND THE NEW HARD DRIVE! .... SEEMS TO ME A HARDWARE PROBLEM? BETWEEN SEAGATE USB 2.0 AND USB 3.0 PORTS?

  IF THE BIOS EVERYTHING IS OFF, THEN WHY HE WOULD ATTEMPT TO BOOT UP OUT OF SOMETHING THAT DOES NOT EXIST IN THE BIOS IT IS! ... MEETS EVERYONE. I HAVE A SMALL PORTABLE 1 TB SEAGATE, IT WORKS PERFECTLY IN USB 2.0 NOT IN 3.0, COOL, MY DIGITAL WEST ON USB 2.0 BUT NOT USB 3.0 ŒUVRES. MY COMPUTER WON'T BOOT UP OFF OF THEM. SITTING AT THE DRAWING BOARD! ??? !!! ....

  Hello
  Thanks for posting your query on the Microsoft Community.

  As you mentioned that your HP desktop computer is not able to start after a reboot.

  I would first disconnect the backup / external drive and check if you are able to start or not.

  I suggest to go to the BIOS and boot sequence and select the internal hard drive as first boot device.

  NOTE: BIOS change / complementary Metal Oxide Semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Setting changes are made at your own risk.

  If the problem persists. I suggest that get you in touch with HP support in order to solve this problem.

  See the link below.
  http://support.HP.com/us-en

  Please let us know if you face the future with other problems with windows. We will be happy to help you further.

• Adobe CreatePDF Desktop Printer will not connect

  I tried to print a document online and a my computer word document. Whenever it says my Adobe CreatePDF Desktop Printer will not connect. Help

  Hi anthonyr,.

  The CreatePDF desktop printer has been removed, that's why you are unable to use it. If you wish, you can remove it by following the instructions in this document: Remove create Adobe PDF Desktop printer.

  Best,

  Sara

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  I have a printer HP psc 2510 series deskjet.  Print many documents, it has notified me that I was low on ink which I was aware of.  I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages.  I constantly tried to cancel the job that kept the origin of the printer show (not answer).  It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec

  Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem.  It does not; He gave the error message on the print job in that causing a feeling of power.

  I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.

  It is imperative to get this resolved.  School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.

  Please - I need immediate assistance.  I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer.  I cancelled each time, but it will not go away.  I turned off the printer, reinstalled in the hope it would be empty, but it will not.

  I appreciate your atttention guest on this subject.  I work with Windows 7 Home Premium 64 bit operating system.

  Thank you for your help.

  Robyn Drake

  E-mail address is removed from the privacy *.

  Try in Services, locate the printer spooler, select it, and then stop the service.

  Then check if you can delete the print job, if so restart the service

• Windows 8 will not connect wireless automatically and sfc/scannow error

  Hey,.

  I have a problem and I hope that some of you may be able to answer. I have a desktop running Windows 8 x 64 which, no matter what I try, just usually don't forget I connect WIFI at home. Every time I start the PC I have to go into the details again once I tried everything (several times), new drivers and virtually all of the suggestions emanating from the research on various forums.
  I say this because when I tried to run the "sfc/scannow" in an elevated cmd, it comes up with an error.

  http://www.Neowin.NET/forum/uploads/monthly_05_2011/post-336322-0-01396700-1305440203.jpg

  Error is the same that above, looking in the CBS.log newspaper he does not mention that it is unable to repair the files of numerours including some relationships Wi - Fi so I don't know whether they are connected or not.

  The wireless network card is the USB - N13 by Asus.

  The wireless works fine on my laptop and my GFs Macbook.

  Anyone has any idea as how to fix WIFI details don't forget not the "sfc/scannow"?

  Kind regards
   
  Jens

  Hello

  I would have you try responses in the thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Also applies to Windows 8.

  We know how it turns out for you.

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• My XP PC will not connect to my printer Epson...

  My Dell Dimension 1100 Windows XP in the connect to my modem with a cable Ethernet RJ45 and we have 2 laptops connected via Wifi. We have an Epson Stylus sx430 wireless printer and it not connecting to my pc (Dell Dimension 1100) have to I do?

  PS: two laptops running windows 7 Home premium and connect to my printer wifi fine.

  My inclination would be to give the printer a static IP address that the DHCP lease can never expire and the printer will not obtain a new address accordingly.  I saw this happen on a local network.

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.