3050 problem...
I can't get my printer to connect to my wireless router. Then I read the post titled "problems with WEP security?
So, you tell me that my printer supports WEP? Yes, Yes, I know that WPA is safer, granted. Problem is, it is not compatible with my Nintendo DS.
So you tell me me either I have to choose between my printer or DS, or good to turn off my security completely?
N °
Read carefully. Some HP printers do not load the shared KEY mode, but they support open system (which is more secure) mode.
Tags: HP Printers
Similar Questions
-
HP Deskjet 3050: Problems installing ink cartridges
I have a HP Deskjet 3050 all-in-in-one J610 series. I purchased & installed a black cartridge 61 and see the message on my printer: "authentic black HP print cartridge installed - ok. However, when I try to click on the button next to 'ok' nothing happens. I try by clicking New, or the one above (as in, maybe I clicked on the wrong button), and I turned my printer and turn it back on. Nothing changes. I'm unable to complete installation of ink cartridges and print anything.
Can someone tell me what is the problem?
It's almost that the Ok button is not responding, or only works intermittently. You took the message of cartridge which means it must have admitted you pressed OK. What happens if you just keep trying to press OK, maybe try a little more pressure when you press it, or hold down the key longer than you should have to. Looks like it may be a hardware problem, you may consider giving us a call.
If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.
HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.
I hope this helps.
-
Standart windows 7 fax-program can not find the driver for my HP Laserjet 3050 all-in-One printer fax-modem. How can I solve this problem?
Hello
What type of operating system are you using?
For Windows 7 32-bit, it is possible to install the full feature software Vista using compatibility mode:
http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02096212
For Windows 7 64-bit however there no all the features available.
You can use the In-OS driver that will provide your printing and basic scan feature via USB connection only, since the PC faxing is not supported for the specific version of the OS:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536257
If you are not sure of your operating system type, you can follow the steps below to identify it easily:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02002390
Kind regards
Shlomi
-
HP Deskjet 3050: Problems with printing in color?
Hi all, I have problems printing in color. No idea what to do. Here's the problem: I'm trying to print in color and the colors look darker on one page, my colors are fine then saw green to halfway through until its finished. On another page, the colors are ok, but some colors are missing. I tried the cleaning test, the colors seem to come out ok! Tried to see the ink and the remaining portion. It seems to be more left black and yellow, cyan and magenta. No idea what do then, never had this problem with the printer before. Thanks for any help!
Looks like you have a cartridge that is short of magenta or default. This can happen to cartridges that are very old, even if they still have ink or third party cartridges that were not filled out properly. The steps of troubleshooting in the paper here may help, but I suspect that you need a cool color cartridge.
-
HP Deskjet 3050 a: problems scanning
Hello
I have a printer HP Deskjet 3050 has.
I had problems with the scanner immediately: everything that I get from the scan are only black vertical lines in the document. There is no way to make it work. In addition, sometimes it works and sometimes not.
I have the same problem on Windows Vista, 7 and 8.Is there a solution?
Thank you. (Sorry for my English)
Hello-
If the problem persist at this stage, so I recommend doing a factory reset for this product. I have information about this reset and it will send you a private message. Please check your Inbox for messages. Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here
-
HP deskjet 3050 j610 all-in-one problem with tricolor cartridge
display printer with three colors cartridge.this problem is a unit recently news that functioned until what I moved the printer in another room today. can anyone help
Moved from feedback
Original title: hp deskjet 3050 j610 all-in-one
What is the exact message that you found?
My advice would be to pull the cartridges and make sure that the ink didn't sink. The printer "bumped" or dropped everything moving? The cartridges have been pot just enough to not be seated more.SC Tom
-
Scan with HP Deskjet 3050 a problem - analysis only about a quarter of a page
I use Mac OS x 10.5.8. My new HP Deskjet 3050 a scan only about a quarter of the page - which swells and then take to the top of the entire page.
I posted a problem as a response, on 16/06/2012 but no response.
Ask for help please.
Please follow these steps on Mac computer.
1. in the Mac menu bar, click Go (if you do not see 'Go', click on an empty area of the screen, then look at the menu in the bar at the top of the page)
2. click on "Utilities" > click on HP utility > click scanning settings > click on "Scan to Computer".
3. click on the tab "scan tasks.4. here you have to select the option that you use when the printer Panel analysis before for example 'Photo file' or 'Document to the file' > then click on the button "Edit".
5. in a row option will appear:Analysis of device HP
Change the file Type scan
Move the items from the Finder
Reveal the Finder
6. Select "Device HP Scan" and now the next option will appear:
Presets (combo)
************************************
Choose the presets on 'Standard' and click OK, and then try to scan from the printer.
.
-
DeskJet 3050 j610a - printing problems
I have a Deskjet 3050 j610a, who is about to throw in the trash. Print quality has deteriorated so that color printing is catastrophic and I tried everything suggested in the documents on this forum and HP assistance. The ink levels are OK. The paper is OK.
When you browse the suggested fixes, when I get to the "page" to print and scan alignment, the alignment page is not detected.
I completely deleted the software and drivers and re-installed the ' software HP Deskjet full feature driver and "of here.
I am running Windows 7 and now when I go to start > all programs > HP > HP Deskjet 3050 J610 series > HP Deskjet 3050 J610 series, nothing happens. Same thing when I double-click on the desktop shortcut pointing to 'C:\Program HP HP Deskjet 3050 J610 series\Bin\HP Deskjet 3050 J610 series.exe' - UDCDevicePage begin. Small swirling icon indicating the program trying to start and then nothing.
I can't reach the 'printer' Actions / areas 'Tasks of Maintenance', etc..
It takes too long to fix for a printer under $100.
Should I persist or throw him out?
Problem solved.
I threw and bought an Epson.
My time is worth more that it took to solve these problems.
-
problem printing with HP deskjet 3050 all in one J610 series
I have a printer HP deskjet 3050 all-in-one series J610 which I use with Windows Vista Version 6.0 (Build 6006: Service pack 2). The connection is by USB port. I have not used the printer for a while, but did all the maintence checks & it's good to go. When I want to print a letter the only thing that is printed is the e-mail address that is blue in color. I think the problem is in the settings of the features of the printer. I can print the letter in gray scale, but it is not easy to read and is not suitable for business relationships.
I would appreciate help with this problem. A definition of the terms used in the features of the printer can help me to solve it in myself.
Thank you
I had a computer guy watch the printer for me. It was broken & he just buy a new, he said. I did it.
So thanks for trying to help.
-
DeskJet 3050 J610a - unexpected wireless connection problem.
Running:
10.7.4 MacOSX
HP software: HP_Lion_Ink_SW_v12.13.17
Printers: Deskjet 3050 J610a worked perfectly via a wireless connection
MacBook5, 1 Intel Core 2 Duo, while I had been with HP Software HP_Installer_DJF4100_v9.7.1, which has been * no * intended for this printer, but I was able to "ADD" the printer Deskjet 3050 through preferences system, through the HP Socket,
[Recklessly] looking for a more "functional" configuration, I looked at HP support and found that a specific software was released for computers running "Lion".
So I uninstalled the previous DJF4100 software, restarted the computer and installed the new software and drivers for Lion as described above.
Now the printer Deskjet 3050 J610a appears in the network of the computer under "devices" as
"HPJ610a.047DED", Type: computer network computer. It is also detected with.
' Security: no ', while my Wi - Fi throughout the House network is encrypted with WPA/WPA2 Personal.
I could of course decline on the previous software and configuration, but before that I would like to understand why this new software, which was released by HP for Mac computers running Lion behaves in such a way, why does the printer as a standalone device (which she has never done it before).
As I said, before I regress to the previous configuration, using a software program that initially is not required by the printer or by the operating system, I greet all the information and suggestions.
I need the wireless connection!
Thanks in advance.
Okay, well, I think that a different router can only solve this problem dead. Consider an Apple Airport Terminal.
If you connect your Mac on the network 'JPJ610a.047DED', this is a direct link between your Mac and printer wireless (not involving only the D-link). So, naturally, you shouldn't be able to get on the Internet with this arrangement.a
When you run the HP software (Finder - go to Applications-> HP->
-> printer software installation &) it will allow you to connect your printer directly to your network with the temporary use of a USB cable. He who does not? -
Intermittent problems wireless on HP Deskjet 3050 has
Hello
I recently bought a HP Deskjet 3050 a J611. The installation was simple and everything seems to work properly. However, after a few hours, the printer was no longer visible on the network (couldn't print unable to connect to the web page of the printer), even if the printer itself seemed always to be connected (IP address showed in the menu without wire and the blue light has been stable on).
Reboot of the router and the printer seems to fix the problem, but after a few hours, the network connection is lost. This has happened several times.
I tried the doctor of printing & scanning HP and have set up an IP address from the printer (192.168.1.235). I also tried to change the wireless channel. None of them seems to have helped.
The computer I used to install the printer at the start is Windows 7 64-bit. The wireless router is a Thomson TG585 v8. Network security is WPA2
Thanks in advance for any help.
I just wanted to day so that if other people are having the same problem, they can see what has worked for me.
Since passing my WPA2 to WPA wireless security, the printer works normally all the time. I now put it to allocated IP address in a manner Dynamics (since a static IP) with a lot of effects, so it seems certainly to be linked to a communication on WPA2 problem.
-
I have a problem with the adapter plugged in, but do not load with pavilion dv6 3050 tx
I bought a new pc hp laptop pavilion dv6 3050 tx a few days before, 1 day I m facing a problem on the charge. I put my laptop on the pricing but maximum time show connected does not support. kindly help me. Is - this prolem with battery or ac adapter or software problem. Please suggest me a solution.
Hello
The adapter block should be able to cope with weak variations in the power supply, so I doubt, however, there is a problem with your electrical network - only an electrician would be able to confirm it for you by testing the circuits of power supply to your property.
Regarding overheating, there is a circuit in your notebook that interrupts the battery when it detects that it is at full capacity, so this shouldn't be a problem.
Kind regards
DP - K
-
Original title: RunDLL
RunDLL
There was a problem starting C:\Program HP HP Deskjet
3050 a J611 Series\bin\HPStatusBL.dll
The specified Module could not be found.
Hello
Here's a Thread on the Forums of HP Support on your error message and methods to fix.
"There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin\HPStatusBL.dll. The specified module could not be found. »
See you soon.
-
There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin HP StatusBL.dll
This is a direct consequence of my delete a printer in my list of installed printers
Recently, I deleted a printer from my PC because I have more access to it. Now, I get this message everytime that I have started. Respect to the printer that I deleted
Hi David,
Download SINO by Artellos & save it to your desktop.
http://www.artellos.com/cCount/click.php?ID=9 (download links: last download exe)
Right-click on SINO.exe and choose "Run as Administrator" to run it.
Then check the following boxes (check) only:Services
Startup itemsOnce activated, press the analysis of execution! button and wait for the program to finish. It should not take long.
Search / search: "monitor alerts of ink."
Delete it.
If you could remove sino & it's log file too if you want - just right click and delete.
Hope this helps, let me know.
Kind regards
Joel
-
Scan with HP Deskjet 3050 a problem - analysis only about a quarter of the page
My HP Deskjet 3050 a wireless print fine with my Mac OS Lion 10.7.3. But whenever I scan something, catches sweep that results from only about a quarter of the page, which swells in size to take to the top of the entire page. (And I am regular sweeping 8 "x 11" documents. ") And I can't zoom in to get the entire page. When I try to change the setting in jpg to PDF utility, to see if that will solve the problem, the utility closes 'unexpectedly' every time.
Hello
First, install the critical update below:
http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmgNow change the settings of the device as follows:
1 open the HP utility and select your device.
2. based on Scan Settings open the "Scan to Computer".
3. click on the tab "scan tasks.
4. Select the shortcut Scan allows to analyze, and then click on edit.
5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
6. in the expanded menu now, open the drop down next to cultures in and set as none.
7. click OK and try to scan.Kind regards
Shlomi
Maybe you are looking for
-
HelloI have set up a default alias identity (call this E2) in my Thunderbird e-mail account. But when I send a message using E2 in the box 'from', when the recipient is a response and selects 'reply to all', my other identity (the actual principal na
-
How can I remove the message "sending progress bar?
When I send an e-mail, sometimes with a send notification with a scrolling box progress bar. How to disable this option?
-
When I click on a toolbar or yet other features the drop-down menu is enlarged or made smaller and it is impossible to click on one of the options. I tried to reinstall and reset, but nothing works.
-
I just got a text on my phone. It is in a green bubble. He told me that if I wanted to continue to use my Apple ID that I would need to connect to the web of care iCloud address. Im sure it is a scam. can anyone confirm this? and if it is how can I r
-
Satellite A500-025 and Satellite A500-02F processors
The A500-025 said she had the centrino T6500 processor while the model A500-02f has processor T6600. Does make a difference that they say it is a CENTRINO processor or is there a difference... or they is the two centrino but just was not mentioned in