3070 connectivity problem - multiple Accespoints with the same SSID

Hi all

I have a problem with my printer HP Deskjet 3070 printer all-in-one.

I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

If I take one of the accespoints offline, the printer becomes available.

Is this a problem on my end or a problem of software/firmware printer?

Kind regards

-eth0

Lol this is not very clear to me?

But it is very good that we continue here:

http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

Tags: HP Printers

Similar Questions

  • Problem of airtime with the same SSID

    I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz.

    Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I don't have problem to play AirPlay on any device. I had the same SSID when so I can use wifi roaming without having to change the SSID whenever the other signal weakens.

    When I put two (router & AP) with the same SSID, Airplay icon will not be displayed? But if I put a different SSID to one of the two, airplay icon is back. Channels are on ch.1 (router) and ch.11 (AP). Someone knows how to set up?

    UPDATE:

    Disable NAT in fact access point the AirPlay icon always appear but he cannot yet play through my APR.

    * all updates *.

    12.4.3 iTunes

    Windows 10 updated, firewall offshore

    Marantz 1506 firmware update

    always put iPhone to update to the latest version

    The routers are also updated to its latest firmwares

    What I believe you are describing is a network expanded through repetition, the Apple TV does not work well with repeaters. Try a different configuration.

  • Satellite R830-1GZ: ConfigFree Radar fails to display the networks without wire with the same SSID

    I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.

    However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.

    I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.

    Is there a utility round way this or another that correctly displays it available different SSID and strength.

    Thank you very much

    Bill

    > Is there a utility round way this or another that correctly displays it available different SSID and strength?

    As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.

    I found some useful Q / A ConfigFree regarding:
    [ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]

    Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
    http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/

  • Multiple accounts with the same email

    I have an account I can not connect to after my daughter it has disconnected. I tried to reset the password, but I get an email on my account to other girls: S (same email)
    I guess I have 3 accounts with the same email, but only the latter can created recover!
    Not even my main Skype has a chance

    I'm not 100% sure but it is most likely that I used the same email to whoever I have to reset - what can I do?

    In fact, this morning I managed to log on to the account of an iPad without frills but the pc refuses to sign ^ ^ ^? "Skype cannot connect" - what is happening?

    I also discovered that I could connect via a browser, but not via the Skype program... So I uninstalled and installed again and it's working now...
    I've now changed the email so I have 3 accounts with the same email address as Skype seems not to be able to manage multiple accounts with the same email!

  • How to open multiple files with the same extension in one program from the Explorer

    I frequently receive several JPG (or whatever extension) files to my clients.  On Windows XP, I could just highlight the files I want to open, and then click Open.  They would be so open to 1 program cascading.  This made it easy when comparing many images.  If I do the same thing in Windows 7, it opens the default program several times and puts 1 image of each open program.  It is Paint Shop Pro in my case.  Thus, instead of so-called images 5 open cascading in Paint Shop Pro... the computer open Paint Shop Pro 5 times with 1 image of each open version of the program.  I tried this search like crazy, but cannot find the right thread for an answer.  Most of the threads are on the opening of the different file types.  My question is only about the opening of multiple files with the same exact file inside 1 free program extension.

    Is this the same version of Paint Shop?

    One thing you might try is to open Paint Shop, then select and drag all the files in this window of the paint shop.  Various programs to manage this type of action differently from the DDE, but it might give you the expected results.

  • How to prevent multiple objects with the same key being stored?

    Hello
    I use of DPL and I want to know if we have any way of preventing multiple objects with the same primary key is stored in the database or not.

    Thank you

    Hello

    Primary keys are unique - there may be multiple objects with the same key. Did you look in the javadoc for the PrimaryIndex and methods put ()?

    -mark

  • Implementation of Airport extreme with the same SSID

    My House has very thick walls and so I run a Cat5 cable for a number of rooms and installed an Airport Extreme for everyone to create a local WiFi network.

    For the moment, each creates its own wi fi network which is very good for connecting phones, tablets and laptops but I'm trying to connect some SONOS devices and they are not find each other so not a link to the main controller of SONOS.

    SONOS support suggests that if I could get the extremes of the airport on the same SSID, which should help you because they would all be network extensions and so devices would be able to find each other.

    I tried making them all extensions of the network wi fi router but can't see not in the options when I select "Extend an existing network", although on my iPad, I can see wi fi network to the router where the Airport Extreme is so too, it is wired to the router would have thought it should be possible to make all the extensions of a single network.  Research in the community, it seems that the airport is unable to extend a wifi network not Apple, but I could at least get all the airports on the same SSID can help.  I also tried to set up airports so they all extend the network, but they do not see each other because they are too far away.

    I'm not an expert in network management, I understand bits having to solve problems earlier, but if there is there advice or suggestions of the community that would be great

    Thank you

    David

    You choose to extend a network when the incoming signal is wifi. What you need is a "mobile network". Simply connect each airport to the router by ethernet and network with the same SSID and password than the original. Reset the airports so that they put in place from the new so that they detect the arrangement and get into bridge mode - you do not want to provide the IP numbers, you want the home router to do and airports to pass.

    See this page and scroll down to "Roaming Network (Wi - Fi connected base stations)':"

    Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

  • 2 with the same SSID E3200

    Hello

    I want to install the following in a new House and I am looking for your help.

    House has 2 floors. I want to install 2 E3200, one on each floor, but with the same SSID and password, etc. so internet connection / streaming throughout the word is flawless. Is this possible?

    Both floors have taken wall ready network and they all lead to the same modem/router, so all devices connected lead to the same network.

    Thanks in advance.

    Bonez

    PS. the two E3200 was last updated Firmware Version: 1.0.03

    1. If your modem is a router, you should consider implemented the two E3200 (i.e. as access points) and not as a router bridge mode. Chaining routers can cause various issues, including the offsets and disconnects. There is generally no reason chain routers in a home network, you probably want all interconnection.

    2. otherwise, if you want to use an E3200 as a router (for example because the modem/router don't provide some functionality of routing/firewall you want) you should put the modem/router mode "bridge" device It transformed into a simple modem, and you can then reconfigure your E3200 for your internet connection (for example PPPoE for DSL) or DHCP for cable. The first E3200 then functions as normal internet router. The second should still be used in bridge only mode.

    3. If your first router is 192.168.2.1 and the second was 192.168.2.200 and you connect through the second port of the internet router and you put not the second router mode bridge, you will get a working network. The second router works as a router and has the 192.168.2. * subnet identical IP on the internet port and the LAN side. It is cannot be routed. It would never work. If you connect two routers, LANs should not overlap (this is why you have to change the first router 192.168.2.1 IP, because your modem/router uses address of 192.168.1. *). If you define 192.168.3.1 as the second address IP LAN E3200 you can connect the internet port of the second to the first E3200 and you can use the second E3200 as router.

    4. However, if you run both as a router with different IP subnets (which is mandatory if the second operates as a router) you cannot set up a roaming network. A unique SSID is supposed to link to the same local network. A wireless client assumes that moving from one access point to another on the same SSID to connect to the same local network, that is, he can always use the same DHCP IP address and everything else looks the same on each access point. However, with two routers routing, you have two different and two IP subnets different local networks. So for roaming, is not possible.

    So, I recommend you:

    a. place if possible the modem/router to bridge fashion and use it as a simple modem only. Configure the first E3200 as internet router on LAN IP 192.168.1.1. Implement the second E3200 mode bridge on a static IP 192.168.1.2. Connect the internet port of the second to the first.

    b. If you need to keep the modem/router as a router on 192.168.1.1, put in place the two E3200 in Bridge mode and assign the first one address static IP 192.168.1.2 and the second a static IP address of 192.168.1.3. Use the internet ports for the connection.

    c. If you insist on chaining an E3200 as router to your modem/router, do the same configuration that (a.), but use 192.168.2.1 and 192.168.2.2 to the IP addresses of the first and the second.

    Whatever it is, you can configure a roaming with the settings wireless wireless network as described above.

  • Must configure with the same SSID of the AP

    We are looking for the purchase of two Access Points to our new building.  We currently have at our old facility two end bottom of AP with two different SSIDs.  Manaully users simply switch between the two.  I would like to know how it would be difficult to set up it would not have users to manually switch as they traveled through the building.

    I have looked at Cisco AP below and I was wondering if she had the ability to do so.  Is there another hardware or software needed to put up something like that.

    Just to clarify I only need two AP and want things transperent to my users.  I want them to be able to walk the area covered to another area covered by the AP2 and AP1 and loose no matter what connection.  Here it's automatic for users do not have to do anything to move things.

    Any info anyone can provide to help me would be greatly appreceated.  Thanks in advance.

    Access point wireless Cisco Aironet 1140 AIR-LAP1141N-A-K9

    As I understand it, you can configure both with the same SSID settings and security and that they will be 'transparent' to switch to the other. It is if you do not use something like an IP phone that requires a quick transition between the two. In this case, you would need a controller.

  • Multiple images with the same file name no doubt prevent export

    iMac running OS X El Capitan v10.11.6; Photos 1.5

    I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

    From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

    All advice and help will be GREATLY appreciated!

    Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

  • [.ini files] Get the value of multiple labels with the same name

    Hello!

    In an ini.files, I need to get the value of each tag named in a certain way in a section, but unfortunately, I have 3 or 4 tags with the same name in several sections. I don't know how to retrieve these values, the program always consider that the first tag and not others, I tried to remove each tag after obtaining its values, that he did not.

    Does anyone have an idea to solve the problem?

    Thank you!

    As you can read in my last post, you must read and throw 'x' lines:

    OpenFile)

    Skip lines

    for (i = 0; i< x;="" i++)="" readline="">

    Start reading the useful lines

    ReadLine () / / read a line

    ... / / Interpret the line

    Don't forget to add a control during i/o operations of robust error and to check the end of the file.

  • How can I get rid of BBC iPlayer signals multiple, all with the same content?

    How can I get rid of several BBC iPlayer stream? I have 3 all with the same content.

    This has happened

    Each time Firefox opened

    == I don't know

    See How can I delete a bookmark?

  • How to import multiple files with the same parameters psd?

    Hi all

    I'm working on a project that requires me to import batches of psd (about 300-400 PSD) files. now when I import PSD files, I have to click all the dialog boxes appearing individually seeking to import the PSD as all merged layers or as sequences.

    now, I have to click 'ok' to all these Photoshop PSD.

    are there not in a way where I can import all Photoshop PSD with the same settings applied to all?

    Thanks in advance for your answers.

    Kind regards

    Unfortunately, the answer is no: one at a time.

    Just curious as to why psd to 300-400?

  • How to register multiple files with the same name with different num revision

    Hello

    Can someone please tell me, how to register several different files with the same name with the revision number using the RIDC API.

    For example:
    First of all I will be saved in a file (TestFile.txt) in a content server with revision number 1 using the RIDC API in application of the ADF. Then after awhile, will change the same line (TestFile.txt) check-in and once again. I tried to check the same file several times, however first Check-in correctly in server showing revision 1, so that Check-in same file again, her gives no error message, and also its not reflecting only not to the server. Single file (TestFile.txt) reflecting on the server.

    How to implement this feature using the RIDC API? Any suggestions would be helpful.

    Concerning
    REDA

    Published by: 887680 on March 6, 2013 10:48

    (1) get the content ID (dDocName), call CHECKOUT_BY_NAME
    (2) call check-in service with dRevLabel = previous dRevlabel + 1

  • connection problem of data with the support of mobistar (Belgium)

    WiFi works. Data connection isn't.

    The signal 'H' or 'E' is highlighted. I tried with the parameters of android and iphone Mobistar Belgium Web site and with all types of authentication. But it is impossible to connect.

    I will try with a sim card from another carrier and let you know.

    In the meantime, does anyone know if there are any specific APN settings for mobistar.be?

    Hi yellowtrolley,

    Thank you for reporting this issue. Please try the following to the APN settings I found on this site nd make sure your specific device supports the following frequencies:

    • GSM 900/1800 (2G GSM) net
    • W CDMA 2100 (3 G UMTS)

    The APN settings:

    • username: mobistar
    • password: mobistar
    • Name of the APN: web.pro.be

    You can also try this page if you need more specific parameters.

    Please let us know if this solves your problem, or if you have other questions about your Firefox OS device.

    Thank you!! =)

    -Ralph

Maybe you are looking for

  • battery or solar powered iphone 6?

    I have an iPhone 6 and would like to know if I can safely power favorite free this device using a powered solar panel or an external battery such as those like below. I'm having a bit of time figure this out on my own and do not want to try it unless

  • a server error occurred. Please "reload" in your browser

    "a server error has occurred. Please "reload" in your browser. Once I reboot error disappears This happens when I open a spreadsheet of google drive.Never happen before, I uninstalled and installed Firefox 22. It will never happen before, I run compu

  • Qosmio G30 - 126 monitor become black and FN buttons do not work

    Hello I have small problem, ehm two problems, but may be small for you :) Last week, I install Vista ultimate WITHOUT RECOVERY CD...It's OK, but I close the cover of the book and instantly open, monitor become black and I can't do anything without re

  • Why read XML taking so long?

    The 'answer' is perhaps that "XML is not intended for this purpose... "but here is the situation: I'm parsing of a directory tree and creating a table of clusters, one for each folder in the tree.  To save it to the 'user-friendly' on the disc format

  • Hi, I just realized my disk drive does not work, can anyone help

    Hi, I just realized my disk drive does not work, I never use watch cd or dvd, now I am installing a norton internet security 2012 after that I put in the cd, there is no response, anyone, please